Bradley BA-200 ATAC

The Bradley BA-200 ATAC (or Bradley ATAC BA-200) was an American homebuilt aircraft that was designed by Bradley Aerospace of Chico, California, introduced in the mid-1990s. The aircraft was intended to be supplied as a kit for amateur construction, but is likely that only one was constructed.

Design and development
The BA-200 was conceived as a follow-on design to the Bradley Aerobat. It was intended to feature two-seats-in-tandem and aerobatic capabilities that included an airframe stressed to +/-15g.

The aircraft was made from all-metal construction. Its 18.4 ft span wing had a wing area of 110 sqft. The cabin width was 22 in. The acceptable power range was 98 to 150 hp and the standard engine used was the 98 hp Volkswagen air-cooled engine.

The aircraft had a typical empty weight of 450 lb and a gross weight of 1000 lb, giving a useful load of 550 lb. With full fuel of 20 u.s.gal the payload for the pilot, passenger and baggage was 430 lb.

The standard day, sea level, no wind, take off with a 98 hp engine was 300 ft and the landing roll was 400 ft.

The manufacturer estimated the construction time from the supplied kit as 200 hours.

Operational history
By 1998 the company reported that one aircraft had been completed and was flying.

In April 2015 no examples were registered in the United States with the Federal Aviation Administration and it is unlikely that any exist any more.