Brazilian destroyer Sergipe (1910)

Sergipe was a Pará-class destroyer (1908) destroyer of the Brazilian Navy, serving from 1910 to 1944. She was named after the Brazilian state of Sergipe.

Description and Construction


The ship had an overall length of 240 ft, a beam of 23.5 ft and a draught of 7+5/6 ft. She was powered by 2 triple expansion reciprocating steam engines, driving two shafts, which developed a total of 8554 ihp and gave a maximum design speed of 27 kn. During the trials the contract speed was exceeded, and the vessel was clocked at 27.60 kn. Steam for the turbines was provided by two double-ended Yarrow boilers. Sergipe carried a maximum of 140 LT of coal that gave her a range of approximately 3700 nmi at 14 kn.

The ship mounted two 4 in guns in single mounts. In addition, four 47 mm (3pdr) cannons in single mounts were deployed at the time of launching.

The official full speed trial for Sergipe took place on July 8, 1910 on the Skelmorlie deep-water measured mile at the mouth of the Clyde. During a continuous three hour run with a 100 ton load, the ship exceeded her contract speed of 27 knots.

Sergipe left Yarrow's yard at Glasgow on October 24, 1910 to start her voyage to Brazil.