C&C 33

The C&C 33 is a series of Canadian sailboats, that were designed by Robert W. Ball of C&C Design and first built in 1974.

The C&C 33 Mark I is a development of the C&C 3/4 Ton, which was introduced earlier in 1974.

Production
The boat designs were built by C&C Yachts in Canada, but are now out of production.

Design
The C&C 33 series are small recreational keelboats, built predominantly of fibreglass, with wood trim. They have masthead sloop rigs with internally-mounted spade-type rudders.

Variants

 * C&C 33-1 or Mark I
 * This model was introduced in 1974 and was produced until 1977, with 209 produced. It has a length overall of 32.87 ft, a waterline length of 26.42 ft, displaces 9800 lb and carries 4075 lb of lead ballast. The boat has a draft of 5.50 ft with the standard keel. The boat is fitted with a Universal Atomic 4 gasoline engine of 30 hp. The fuel tank holds 20 u.s.gal and the fresh water tank also has a capacity of 20 u.s.gal. It has a hull speed of 6.89 kn.


 * C&C 30E
 * Built from 1977 until 1982 in Europe, this boat was based upon the Mark I design.


 * C&C 33-2 or Mark II
 * Smaller and lighter than the Mark I, this entirely new design was introduced in 1984 and was built until 1988, with 200 completed. It has a length overall of 32.58 ft, a waterline length of 26.17 ft, displaces 9450 lb and carries 3975 lb of lead ballast. The boat has a draft of 6.33 ft with the standard keel and 6.5 ft with the optional keel and centreboard in the down position and 4.33 ft with the centreboard up. The boat is fitted with a Japanese Yanmar 2GM diesel engine of 20 hp. The fuel tank holds 18 u.s.gal and the fresh water tank has a capacity of 30 u.s.gal. The centreboard version has a PHRF racing average handicap of 150 with a high of 158 and low of 141. It has a hull speed of 6.85 kn.