Combining rules

In computational chemistry and molecular dynamics, the combination rules or combining rules are equations that provide the interaction energy between two dissimilar non-bonded atoms, usually for the part of the potential representing the van der Waals interaction. In the simulation of mixtures, the choice of combining rules can sometimes affect the outcome of the simulation.

Combining rules for the Lennard-Jones potential
The Lennard-Jones Potential is a mathematically simple model for the interaction between a pair of atoms or molecules. One of the most common forms is

V_{LJ} = 4\varepsilon \left[ \left(\frac{\sigma}{r}\right)^{12} - \left(\frac{\sigma}{r}\right)^{6} \right] $$ where ε is the depth of the potential well, σ is the finite distance at which the inter-particle potential is zero, r is the distance between the particles. The potential reaches a minimum, of depth ε, when r = 21/6σ ≈ 1.122σ.

Lorentz-Berthelot rules
The Lorentz rule was proposed by H. A. Lorentz in 1881:
 * $$\sigma_{ij} = \frac{\sigma_{ii} + \sigma_{jj}}{2}$$

The Lorentz rule is only analytically correct for hard sphere systems. Intuitively, since $$\sigma_{i}, \sigma_{j}$$ loosely reflect the radii of particle i and j respectively, their averages can be said to be the effective radii between the two particles at which point repulsive interactions become severe.

The Berthelot rule (Daniel Berthelot, 1898) is given by:


 * $$\epsilon_{ij} = \sqrt{\epsilon_{ii} \epsilon_{jj}}$$.

Physically, this arises from the fact that $$\epsilon$$ is related to the induced dipole interactions between two particles. Given two particles with instantaneous dipole $$\mu_i, \mu_j$$ respectively, their interactions correspond to the products of $$\mu_i, \mu_j$$. An arithmetic average of $$\epsilon_i$$ and $$\epsilon_j$$ will not however, result in the average of the two dipole products, but the average of their logarithms would be.

These rules are the most widely used and are the default in many molecular simulation packages, but are not without failings.

Waldman-Hagler rules
The Waldman-Hagler rules are given by:


 * $$r_{ij}^0 = \left( \frac{ (r_i^0)^6 + (r_j^0)^6 }{2} \right)^{1/6}$$

and
 * $$\epsilon_{ij} = 2 \sqrt{\epsilon_i \cdot \epsilon_j} \left( \frac{ (r_i^0)^3 \cdot (r_j^0)^3 }{ (r_i^0)^6  + (r_j^0)^6 }  \right)$$

Fender-Halsey
The Fender-Halsey combining rule is given by
 * $$\epsilon_{ij} = \frac{2 \epsilon_i \epsilon_j}{\epsilon_i + \epsilon_j}$$

Kong rules
The Kong rules for the Lennard-Jones potential are given by:


 * $$\epsilon_{ij}\sigma_{ij}^{6}=\left(\epsilon_{ii}\sigma_{ii}^{6}\epsilon_{jj}\sigma_{jj}^{6}\right)^{1/2}$$
 * $$ \epsilon_{ij}\sigma_{ij}^{12} =

\left[ \frac{ (\epsilon_{ii}\sigma_{ii}^{12})^{1/13} + (\epsilon_{jj}\sigma_{jj}^{12})^{1/13} }{2} \right]^{13} $$

Others
Many others have been proposed, including those of Tang and Toennies Pena, Hudson and McCoubrey and Sikora (1970).

Good-Hope rule
The Good-Hope rule for Mie–Lennard‐Jones or Buckingham potentials is given by:
 * $$\sigma_{ij} = \sqrt{\sigma_{ii} \sigma_{jj}}$$

Hogervorst rules
The Hogervorst rules for the Exp-6 potential are:
 * $$\epsilon_{12} = \frac{2 \epsilon_{11} \epsilon_{22}}{\epsilon_{11} + \epsilon_{22}}$$

and
 * $$\alpha_{12}=\frac{1}{2} (\alpha_{11} + \alpha_{22})$$

Kong-Chakrabarty rules
The Kong-Chakrabarty rules for the Exp-6 potential are:


 * $$\left[ \frac{\epsilon_{12}\alpha_{12} e^{\alpha_{12}}}{(\alpha_{12}-6)\sigma_{12}} \right]^{2\sigma_{12}/\alpha_{12}}=

\left[ \frac{\epsilon_{11}\alpha_{11} e^{\alpha_{11}}}{(\alpha_{11}-6)\sigma_{11}} \right]^{\sigma_{11}/\alpha_{11}} \left[ \frac{\epsilon_{22}\alpha_{22} e^{\alpha_{22}}}{(\alpha_{22}-6)\sigma_{22}} \right]^{\sigma_{22}/\alpha_{22}} $$


 * $$\frac{\sigma_{12}}{\alpha_{12}}= \frac{1}{2} \left( \frac{\sigma_{11}}{\alpha_{11}} + \frac{\sigma_{22}}{\alpha_{22}} \right)$$

and
 * $$\frac{\epsilon_{12}\alpha_{12}\sigma_{12}^6}{(\alpha_{12}-6)} = \left[\frac{\epsilon_{11}\alpha_{11}\sigma_{11}^6}{(\alpha_{11}-6)} \frac{\epsilon_{22}\alpha_{22}\sigma_{22}^6}{(\alpha_{22}-6)}   \right]^{\frac{1}{2}}$$

Other rules for that have been proposed for the Exp-6 potential are the Mason-Rice rules and the Srivastava and Srivastava rules (1956).

Equations of state
Industrial equations of state have similar mixing and combining rules. These include the van der Waals one-fluid mixing rules


 * $$a_{mix} = \sum_i \sum_j y_i y_j a_{ij}$$
 * $$b_{mix} = \sum_i y_i b_i$$

and the van der Waals combining rule, which introduces a binary interaction parameter $$k_{ij}$$,


 * $$a_{ij}=\sqrt{a_{ii}a_{jj}}(1-k_{ij})$$.

There is also the Huron-Vidal mixing rule, and the more complex Wong-Sandler mixing rule, which equates excess Helmholtz free energy at infinite pressure between an equation of state and an activity coefficient model (and thus with liquid excess Gibbs free energy).