Direct air capture

Direct air capture (DAC) is the use of chemical or physical processes to extract carbon dioxide directly from the ambient air. If the extracted is then sequestered in safe long-term storage (called direct air carbon capture and sequestration (DACCS)), the overall process will achieve carbon dioxide removal and be a "negative emissions technology" (NET).

The carbon dioxide is captured directly from the ambient air; this is contrast to carbon capture and storage (CCS) which captures  from point sources, such as a cement factory or a bioenergy plant. After the capture, DAC generates a concentrated stream of for sequestration or utilization. Carbon dioxide removal is achieved when ambient air makes contact with chemical media, typically an aqueous alkaline solvent or sorbents. These chemical media are subsequently stripped of CO2 through the application of energy (namely heat), resulting in a CO2 stream that can undergo dehydration and compression, while simultaneously regenerating the chemical media for reuse.

When combined with long-term storage of, DAC is known as direct air carbon capture and storage (DACCS or DACS ). DACCS can act as a carbon dioxide removal mechanism (or a carbon negative technology), although it has yet to be integrated into emissions trading because, at over US$1000, the cost per tonne of carbon dioxide is many times the carbon price on those markets. For the end-to-end process to remain net carbon negative, DAC machines must be powered by renewable energy sources, since the process can be quite power intensive. Future innovations may reduce the energy intensity of this process.

DAC was suggested in 1999 and is still in development. Several commercial plants are planned or in operation in Europe and the US. Large-scale DAC deployment may be accelerated when connected with economical applications or policy incentives.

In contrast to carbon capture and storage (CCS) which captures emissions from a point source such as a factory, DAC reduces the carbon dioxide concentration in the atmosphere as a whole. Thus, DAC can be used to capture emissions that originated in non-stationary sources such as airplanes.

Methods of capture
Most commercial techniques require large fans to push ambient air through a filter. More recently, Ireland-based company Carbon Collect Limited has developed the MechanicalTree™ which simply stands in the wind to capture. The company claims this 'passive capture' of significantly reduces the energy cost of Direct Air Capture, and that its geometry lends itself to scaling for gigaton  capture.

Most commercial techniques use a liquid solvent—usually amine-based or caustic—to absorb from a gas. For example, a common caustic solvent: sodium hydroxide reacts with and precipitates a stable sodium carbonate. This carbonate is heated to produce a highly pure gaseous stream. Sodium hydroxide can be recycled from sodium carbonate in a process of causticizing. Alternatively, the binds to solid sorbent in the process of chemisorption. Through heat and vacuum, the is then desorbed from the solid.

Among the specific chemical processes that are being explored, three stand out: causticization with alkali and alkali-earth hydroxides, carbonation, and organic−inorganic hybrid sorbents consisting of amines supported in porous adsorbents.

Other explored methods
The idea of using many small dispersed DAC scrubbers—analogous to live plants—to create environmentally significant reduction in levels, has earned the technology a name of artificial trees in popular media.

Moisture swing sorbent
In a cyclical process designed in 2012 by professor Klaus Lackner, the director of the Center for Negative Carbon Emissions (CNCE), dilute can be efficiently separated using an anionic exchange polymer resin called Marathon MSA, which absorbs air  when dry, and releases it when exposed to moisture. A large part of the energy for the process is supplied by the latent heat of phase change of water. The technology requires further research to determine its cost-effectiveness.

Metal-organic frameworks
Other substances which can be used are metal–organic frameworks (MOFs).

Membranes
Membrane separation of rely on semi-permeable membranes. This method requires little water and has a smaller footprint. Typically polymeric membranes, either glassy or rubbery, are used for direct air capture. Glassy membranes typically exhibit high selectivity with respect to Carbon Dioxide; however, they also have low permeabilities. Membrane capture of carbon dioxide is still in development and needs further research before it can be implemented on a larger scale.

Environmental impact
Proponents of DAC argue that it is an essential component of climate change mitigation. Researchers posit that DAC could help contribute to the goals of the Paris Agreement (namely limiting the increase in global average temperature to well below 2 °C above pre-industrial levels). However, others claim that relying on this technology is risky and might postpone emission reduction under the notion that it will be possible to fix the problem later, and suggest that reducing emissions may be a better solution.

DAC relying on amine-based absorption demands significant water input. It was estimated, that to capture 3.3 gigatonnes of a year would require 300 km3 of water, or 4% of the water used for irrigation. On the other hand, using sodium hydroxide needs far less water, but the substance itself is highly caustic and dangerous.

DAC also requires much greater energy input in comparison to traditional capture from point sources, like flue gas, due to the low concentration of. The theoretical minimum energy required to extract from ambient air is about 250 kWh per tonne of, while capture from natural gas and coal power plants requires, respectively, about 100 and 65 kWh per tonne of. Because of this implied demand for energy, some have proposed using "small nuclear power plants" connected to DAC installations.

When DAC is combined with a carbon capture and storage (CCS) system, it can produce a negative emissions plant, but it would require a carbon-free electricity source. The use of any fossil-fuel-generated electricity would end up releasing more to the atmosphere than it would capture. Moreover, using DAC for enhanced oil recovery would cancel any supposed climate mitigation benefits.

Applications
Practical applications of DAC include:


 * enhanced oil recovery,
 * production of carbon-neutral synthetic fuel and plastics,
 * beverage carbonation,
 * carbon sequestration,
 * improving concrete strength,
 * creating carbon-neutral concrete alternative,
 * enhancing productivity of algae farms,
 * enrichment of air in greenhouses

These applications require different concentrations of product formed from the captured gas. Forms of carbon sequestration such as geological storage require pure products  (concentration > 99%), while other applications such as agriculture can function with more dilute products (~ 5%). Since the air that is processed through DAC originally contains 0.04% (or 400 ppm), creating a pure product requires more energy than a dilute product and is thus typically more expensive.

DAC is not an alternative to traditional, point-source carbon capture and storage (CCS), rather it is a complementary technology that could be utilized to manage carbon emissions from distributed sources, fugitive emissions from the CCS network, and leakage from geological formations. Because DAC can be deployed far from the source of pollution, synthetic fuel produced with this method can use already existing fuel transport infrastructure.

Cost
One of the largest hurdles to implementing DAC is the cost of separating and air. it is estimated that the total system cost is over $1,000 per tonne of CO2. Large-scale DAC deployment can be accelerated by policy incentives.

Carbon Engineering
Carbon Engineering is a commercial DAC company founded in 2009 and backed, among others, by Bill Gates and Murray Edwards. , it runs a pilot plant in British Columbia, Canada, that has been in use since 2015 and is able to extract about a tonne of a day. An economic study of its pilot plant conducted from 2015 to 2018 estimated the cost at $94–232 per tonne of atmospheric removed.

Partnering with California energy company Greyrock, Carbon Engineering converts a portion of its concentrated into synthetic fuel, including gasoline, diesel, and jet fuel.

The company uses a potassium hydroxide solution. It reacts with to form potassium carbonate, which removes a certain amount of  from the air.

Climeworks
Climeworks's first industrial-scale DAC plant, which started operation in May 2017 in Hinwil, in the canton of Zurich, Switzerland, can capture 900 tonnes of per year. To lower its energy requirements, the plant uses heat from a local waste incineration plant. The is used to increase vegetable yields in a nearby greenhouse.

The company stated that it costs around $600 to capture one tonne of from the air.

Climeworks partnered with Reykjavik Energy in Carbfix, a project launched in 2007. In 2017, the CarbFix2 project was started and received funding from EuropeanUnion's Horizon2020 research program. The CarbFix2 pilot plant project runs alongside a geothermal power plant in Hellisheidi, Iceland. In this approach, is injected 700 meters under the ground and mineralizes into basaltic bedrock forming carbonate minerals. The DAC plant uses low-grade waste heat from the plant, effectively eliminating more than they both produce.

On May 8, 2024, Climeworks activated the world's largest DAC planet named Mammoth in Iceland. It will be able to pull 36,000 tons of carbon from the atmosphere a year at full capacity, according to Climeworks, equivalent to taking around 7,800 gas-powered cars off the road for a year.

Global Thermostat
Global Thermostat is private company founded in 2010, located in Manhattan, New York, with a plant in Huntsville, Alabama. Global Thermostat uses amine-based sorbents bound to carbon sponges to remove from the atmosphere. The company has projects ranging from 40 to 50,000 tonnes per year.

The company claims to remove for $120 per tonne at its facility in Huntsville.

Global Thermostat has closed deals with Coca-Cola (which aims to use DAC to source for its carbonated beverages) and ExxonMobil which intends to start a DAC-to-fuel business using Global Thermostat's technology.

Soletair Power
Soletair Power is a startup founded in 2016, located in Lappeenranta, Finland, operating in the fields of Direct Air Capture and Power-to-X. The startup is primarily backed by the Finnish technology group Wärtsilä. According to Soletair Power, its technology is the first to combine Direct Air Capture with buildings' HVAC systems. The technology captures from the air running through a building's existing ventilation units inside buildings for removing atmospheric  while reducing the building's net emissions. The captured is mineralized to concrete, stored or utilized to create synthetic products like food, textile or renewable fuel. In 2020, Wärtsilä, together with Soletair Power and Q Power, created their first demonstration unit of Power-to-X for Dubai Expo 2020, that can produce synthetic methane from captured from buildings.

Prometheus Fuels
Is a start-up company based in Santa Cruz which launched out of Y Combinator in 2019 to remove CO2 from the air and turn it into zero-net-carbon gasoline and jet fuel. The company uses a DAC technology, adsorbing CO2 from the air directly into process electrolytes, where it is converted into alcohols by electrocatalysis. The alcohols are then separated from the electrolytes using carbon nanotube membranes, and upgraded to gasoline and jet fuels. Since the process uses only electricity from renewable sources, the fuels are carbon neutral when used, emitting no net CO2 to the atmosphere.

Heirloom Carbon Technologies
Heirloom's first direct air capture facility opened in Tracy, California, in November 2023. The facility can remove up to 1,000 U.S. tons of annually, which is then mixed into concrete using technologies from CarbonCure. Heirloom also has a contract with Microsoft in which the latter will purchase 315,000 metric tons of removal.

Other companies

 * Infinitree – earlier known as Kilimanjaro Energy and Global Research Technology. Part of US-based Carbon Sink. Demonstrated a pre-prototype of economically viable DAC technology in 2007
 * Skytree – a company from Netherlands
 * UK Carbon Capture and Storage Research Centre
 * Center for Negative Carbon Emissions of Arizona State University
 * Carbyon – a startup company in Eindhoven, the Netherlands
 * TerraFixing – a startup in Ottawa, Canada
 * Carbfix – a subsidiary of Reykjavik Energy, Iceland
 * Energy Impact Center – a research institute that advocates for the use nuclear energy to power direct air capture technologies
 * Mission Zero Technologies — a startup in London, UK
 * NeoCarbon— a startup based in Berlin, Germany

Innovations in Research
Within the research domain, the ETH Zurich team's development of a photoacid solution for direct air capture marks a significant innovation. This technology, still under refinement, stands out for its minimal energy requirements and its novel chemical process that enables efficient CO2 capture and release. This method's potential for scalability and its environmental benefits align it with ongoing efforts by other companies listed in this section, contributing to the global pursuit of effective and sustainable carbon capture solutions.