Electronic apex locator

An electronic apex locator is an electronic device used in endodontics to determine the position of the apical constriction and thus determine the length of the root canal space. The apex of the root has a specific resistance to electrical current, and this is measured using a pair of electrodes typically hooked into the lip and attached to an endodontic file. The electronic principle is relatively simple and is based on electrical resistance; when a circuit is complete (tissue is contacted by the tip of the file), resistance decreases markedly and current suddenly begins to flow. Various devices signal this event by a beep, a buzz, a flashing light, digital readouts, or a pointer on a dial.

History and uses
The original electronic apex locators operated on the direct current principle. A problem with these devices was that conductive fluids such as hemorrhage, exudate, or irrigant in the canal would permit current flow and therefore a false reading. Newer devices are impedance-based, using alternating current of two frequencies;these measure and compare two electrical impedances that change as the file moves apically. The benefit is that these devices are much less affected by fluid conductive media in the canal. The impedance type apex locators have been demonstrated to be 80 to 95% accurate in identifying the apical foramen. Therefore after obtaining a reading, 1 to 2 mm is subtracted as the corrected working length.

Electronic apex locators have been shown to be more accurate than radiography when determining the position of the apical foramen. All apex locators have two electrodes, one is connected to an endodontic instrument, the other is connected to the patient's body (on the lip or an electrode in his hand). The electrical circuit is completed, when the instrument is introduced into the root canal in an apical direction, and touches the periodontal tissues.

Adaptive Apex Locators
Adaptive Apex Locator overcomes as the disadvantages of the popular 4th generation apex locators – low accuracy on working in wet canals, as well the disadvantages of devices from previous generations. Though, fifth generation locators can experience difficulty when working in dry canals and require additional wetting. Adaptive Apex Locator continuously defines humidity of the canal and immediately adapts for dry or wet canal. On this way is possible to be measured as in dry and in additional wetted canals as well, canals with blood or exudates, canals with still not-extirpated pulp.