Ford Duratorq engine

The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines introduced in 2000-2020. The larger capacity 5-cylinder units use the Power Stroke branding when installed in North American-market vehicles. The first design, codenamed "Puma" during its development, replaced the older Endura-D unit which had been around since 1984. Commercial versions of the Puma unit replaced Ford's older "2.5Di" type unit used in the Transit, and many other manufacturers' vehicles - most notably the London Taxi and in the Land Rover Defender. Other unrelated units in this range have been developed by Ford and PSA. The TDCi Duratorq engines are available in vehicles from Ford, Jaguar, Land Rover, Volvo and Mazda. A new EcoBlue diesel engine range, originally codenamed "Panther" and planned to be available in 2.0- and 1.5-litre variants, will progressively replace the Duratorq engines from 2016.

DLD
The inline-four engines are sold under the Duratorq TDCi name by Ford, and as the HDi by Citroën and Peugeot. These are part of the DLD family. Mazda also uses the DLD engine in the Mazda2 and the Mazda3, calling it the MZ-CD or CiTD. The Ford/PSA joint-venture for the production of the DLD was announced in September, 1998.

Officially, there are two families of engines in the range:
 * The 1.4L is generally non-intercooled
 * The 1.5L derived from the 1.6L
 * The 1.6 L always intercooled

Ford later added their unrelated 1.8 L DLD-418 engine to the DLD family, though it is properly part of the Ford Endura engine family.

1.4 "Tiger"
The Duratorq DLD-414 (or DV4) is a 1399 cc inline-four Turbo–Diesel. Output is 50 kW at 4500 rpm and 160 Nm at 2000 rpm. This engine was developed in Trémery by Peugeot, as described in the joint-venture agreement with Ford. This engine is built in France, UK and India.

The DV4 is available in two versions:
 * One, an 8-valve design, uses a BorgWarner KP35 turbocharger, but no intercooler. This is the same turbocharger as the Renault K9K Diesel. It is Euro III compliant, but received a diesel particulate filter in 2006 to make it Euro IV compliant.
 * A second version uses a DOHC 16-valve design, with an intercooled variable-geometry turbocharger. This derivation will no longer be built from 2006, as it will not be able to comply with the Euro IV regulations. It also uses Delphi Automotive's DCR1400 common-rail injection system.

1.5
In 2012, Ford added the 1.5-litre, closely derived from the 1.6-litre engine. Bore was reduced from 75 to 73.5 mm while the stroke remained unchanged 88.3 mm.

1.6 "Tiger"
The DLD-416 (or DV6) is a 1560 cc 90 or version also used by Ford, Mazda, Volvo, Mini, Peugeot and Citroën. This particular engine was designed by Peugeot engineers on behalf of PSA and Ford.

1.8 "Lynx"
The Duratorq DLD-418 is a 1753 cc intercooled common rail diesel engine. It is completely unrelated to the 1.4/1.6 units, and is a development of Ford's 1.8 8v Endura-D engine that saw service through the 1980s and 1990s. However, Ford considers it part of the DLD family, as evidenced by the official "DLD" name.

The Endura-D was heavily revised and updated with a variable-vane turbocharger and a Delphi high-pressure common rail injection system and relaunched in 2001 as the 'DuraTorq TDCi', with the original engine being rebadged 'DuraTorq TDDi'.

This engine, possibly known within Ford as "Kent Diesel", is the last evolution of the 997 cc petrol engine introduced in the 105E Anglia in 1959.

ZSD ("Puma")
Codenamed Puma during development, these Ford 2.0 L, 2.2 L, and 2.4 L engines are called ZSD. They are produced at the company's Dagenham plant in east London.

Note: the 2.5 and 3.0L "W" engines in above table are NOT Puma engines. They are Mazda designed commercial Diesel engines with no commonality to Puma. The "W" engine family is used in the Asia Pacific Ranger and Everest models currently running out.

2.0
Released in 2000, to coincide with the launch of the Mk3 Ford Mondeo, the Duratorq ZSD-420 was initially available as a 1998 cc direct injection turbodiesel. Producing 115 PS and 280 Nm it was a vast improvement over the 1.8 Endura-D powering the Mk2 Mondeo. It featured a 16-valve cylinder head with twin chain driven camshafts and utilised a variable-geometry turbocharger with overboost function.

In late 2001 the engine was fitted with Delphi common rail fuel injection and called the Duratorq TDCi (Turbo Diesel Commonrail injection), with the original unit being renamed the Duratorq TDDi (Turbo Diesel Direct injection). Although generally identical to the original engine, the addition of the common rail system meant power was increased to 130 PS, with torque rising to 330 Nm. In 2002 the Duratorq TDDi was replaced by a detuned version of the Duratorq TDCi. Producing 115 PS and 285 Nm, this unit used a fixed geometry turbocharger in place of the variable geometry unit used in the TDDi and 130 PS TDCi.

With 2005 came another detuned version of the TDCi for the Mondeo. Producing 90 PS and 280 Nm, this engine was substantially cheaper than other versions and was mainly targeted at fleet buyers.

Applications:
 * Ford Transit 2.0 TDDi & TDCi 75, 85, 100 PS(TDDi) 125 (TDCi) (75 PS/175 Nm) (86 PS/230 Nm) (101 PS/250 Nm) (125 PS/285 Nm)
 * 2000–2002 Ford Mondeo 2.0 TD & TDDi, 115 PS and 280 Nm
 * 2001–2007 Ford Mondeo 2.0 TDCi 130, 130 PS and 330 Nm
 * 2002–2007 Ford Mondeo 2.0 TDCi 115, 115 PS and 285 Nm
 * 2005–2007 Ford Mondeo 2.0 TDCi 90, 90 PS and 245 Nm
 * 2003–2009 Jaguar X-Type 2.0d, 130 PS and 330 Nm  DSWDD

2.2
In 2004, Ford introduced the Duratorq ZSD-422, a 2198 cc turbodiesel for top-of-the-range versions of the Mondeo and Jaguar X-Type which produced 155 PS. This is unrelated to the PSA DW12 2.2 unit used in Peugeot and Citroën applications.

Applications:
 * Ford Transit
 * 2004–2007 Ford Mondeo 2.2 TDCi 155, 155 PS and 355 Nm
 * 2004–2009 Jaguar X-Type
 * 2011–2016 Land Rover Defender
 * 2011–2021 Ford Ranger T6 & Mazda BT-50 2.2 TDCi / MZ-CD 2.2 110 kW & 375 Nm
 * 2012– 2016 Ford Transit Custom
 * 2015–2021 Ford Everest 2.2 TDCi
 * 2007-2016 Peugeot Boxer/Citroën Relay

2.4
The 2402 cc Duratorq ZSD-424 is a turbocharged and intercooled Diesel. Output is 75 PS to 137 PS and 185 Nm to 375 Nm.

Applications:
 * Ford Transit
 * 2002-2006 LDV Convoy
 * 2002 London Taxi TXII
 * 2007-2011 Land Rover Defender

2.5 (Mazda WLC)
Introduced for the Thailand-built 2007 Ford Ranger (J97U) is a 2.5 L diesel engine. This truck is a clone of the Mazda B-Series and thus the engine is a Mazda engine. It has a bore and a stroke of 93x92 mm. The engine has no commonality to Ford's "Puma" engine or VM Motori. It is a development of the IDI Mazda 2.2L normally aspirated, later 2.5L NA and Turbo and later 2.9L NA, with Bosch common-rail direct injection and a variable geometry turbocharger. The WLC engine code is a Mazda engine code, not being changed for use in the Mazda B-Series clone Ford Ranger. It produces 143 PS @ 3500 rpm and 330 Nm @ 1800 rpm.

3.0 (Mazda WEC)
A 3.0L Mazda W-engine similar to the 2.5 is also used in the 2007 Ranger as the top of the range. Displacement is increased with a wider bore of 96 mm and longer stroke of 102 mm. It produces 156 PS @ 3200 rpm and 380 Nm @ 1800 rpm.

The W-engine family remains a Mazda engine and has no commonality to "Puma"

3.2
The 3.2 is an inline, 5-cylinder engine used in the Ford Transit, the Ford Ranger (2012–2022), Ford Everest (2015–2022), Mazda BT-50, Troller T4 and the Vivarail D-Train. For the North American-spec Transit, the 3.2L Duratorq is modified to meet American and Canadian emissions standards and is branded as a Power Stroke engine. The 3.2 Power Stroke is rated at 187 PS and 470 Nm, and the DuratorqTDCi, available in Asia and Europe, has a power rating of 200 PS at 3,000 rpm and a torque rating at 470 Nm between 1,750 and 2,500 rpm.

2005 TDCi (PSA DW Based)
Continuing the Ford/PSA diesel engine joint-venture, these straight-four engines are sold under the Duratorq TDCi name by Ford, and as the HDi by Citroën and Peugeot. A development of the existing DW10/DW12 engine, the new engines have a traditional belt-driven system, moving away from the chain-driven camshafts of the previous generation (Puma) TDCi engines. Both engines utilise common rail diesel technology and are the result of the fourth phase of the cooperation between PSA and Ford (initiated in 1998).

Both engines utilise all-new, third-generation common rail injection systems. The 2.0 engines utilising a system from Siemens and the 2.2 a system from Bosch. In both systems the injection pressure has been increased to 1800 bar. This higher injection pressure, associated with new piezo-electric injectors in which each nozzle is equipped with seven apertures (instead of five previously), allows the number of injections to be multiplied (potentially up to six per cycle) and ensures meticulous uniformity of the diesel injection spray pattern. As a result of this optimised air/diesel mix, combustion is more complete and more uniform, and therefore reduces emissions at source.

2.0 (PSA DW10 Based)
Based on the PSA DW10 engine and with a capacity of 1997 cc, this engine was developed by Peugeot engineers in France on behalf of both PSA and Ford Motor Company. Production is currently taking place in France and Skövde in Sweden. The engine was released to Ford models in 2005 Ford Focus, and followed in the 2007 Mk IV Mondeo. It features a 16-valve cylinder head with twin belt driven camshafts (exhaust camshaft connected to cambelt with inlet camshaft indirectly linked via a timing chain) and utilises a variable geometry turbocharger with overboost function. An intercooler is always present, as opposed to some applications of its predecessor.

In the 2005 Focus, engine power output is 136 PS; and in the 2007 Mondeo it is offered with 130 PS or 140 PS, mated to a manual or 6-speed Aisin TF81 automatic gearbox. In early 2010 this 2.0 unit was updated, as well as the existing 138 bhp version, a new 163 PS with 340 Nm of torque was added to the range.

Applications:
 * 2003–present Ford Focus C-Max 2.0 TDCi, 136 PS and 340 Nm
 * 2005–present Ford Focus 2.0 TDCi, 136 PS and 340 Nm
 * 2006–present Ford S-Max 2.0 TDCi, 130 PS and 340 Nm
 * 2006–present Ford S-Max 2.0 TDCi, 140 PS and 340 Nm
 * 2006–present Ford Galaxy 2.0 TDCi, 130 PS and 340 Nm
 * 2006–present Ford Galaxy 2.0 TDCi, 140 PS and 340 Nm
 * 2015–present Ford Galaxy 2.0 TDCi, 213 PS and 450 Nm
 * 2007–2014 Ford Mondeo 2.0 TDCi, 140 PS and 320 Nm
 * 2007–2010 Ford Mondeo 2.0 TDCi, 160 PS and 340 Nm
 * 2008–present Ford Kuga 2.0 TDCi, 136 PS and 320 Nm
 * 2008–2013 Ford Kuga 2.0 TDCi, 163 PS and 340 Nm
 * 2010–2014 Ford Mondeo 2.0 TDCi, 163 PS and 340 Nm
 * 2014–2018 Ford Mondeo 2.0 TDCi, 150 PS and 350 Nm
 * 2014–2018 Ford Mondeo 2.0 TDCi, 180 PS and 400 Nm
 * 2015–2018 Ford Mondeo 2.0 TDCi, 210 PS and 450 Nm

Other Applications:
 * 2004–2007 Peugeot 307 2.0 HDi, 136 PS and 340 Nm
 * 2005–2010 Peugeot 407 2.0 HDi, 136 PS and 340 Nm
 * 2005–2011 Peugeot 607 2.0 HDi, 136 PS and 340 Nm
 * 2006–2014 Peugeot 807 2.0 HDi, 136 PS and 340 Nm
 * 2008–2013 Peugeot 308 2.0 HDi, 136 PS and 340 Nm
 * 2011–present Peugeot 508 2.0 HDi, 165 PS and 340 Nm
 * 2004–2010 Volvo C30/C70/S40/V50 2.0 D, 136 PS and 320 Nm (called D4204T)
 * 2007–2010 Volvo S80/V70 2.0 D, 136 PS and 340 Nm (called D4204T)

2.2 (PSA DW12 Based)
Based on the PSA DW12 engine and with a capacity of 2179 cc, this engine was released in April 2008 by Ford in the Mk IV Mondeo, soon following in the Ford S-Max and Ford Galaxy. It has been engineered by Ford in England, as described in the fourth phase of the joint-venture agreement with PSA. Production takes place in PSA's Tremery plant. It features a 16-valve cylinder head with twin belt driven camshafts and utilises a variable geometry turbocharger with overboost function, rather than the twin turbo approach of Peugeot and Citroën. The result is 175 PS with 400 Nm of torque, although 420 Nm is temporarily available thanks to the transient overboost function. Land Rover used this engine in the Freelander 2 and Range Rover Evoque.

In 2010 Ford and PSA revised the engine with a new turbocharger and a new power output of 200 PS with a torque of 420 Nm and 450 Nm at overboost conditions while the emissions are at Euro 5 level.

Applications: Other applications:
 * 2008–2010 Ford Mondeo 2.2 TDCi, 175 PS and 400 Nm
 * 2008–2015 Ford S-Max 2.2 TDCi, 175 PS and 400 Nm
 * 2008–2015 Ford Galaxy 2.2 TDCi, 175 PS and 400 Nm
 * 2010–2015 Ford Mondeo 2.2 TDCi, 200 PS and 420 Nm (450 Nm at overboost)
 * 2011–2015 Range Rover Evoque 2.2 eD4, 150 PS and 400 Nm
 * 2011–2015 Range Rover Evoque 2.2 SD4, 190 PS and 430 Nm
 * 2014–2015 Land Rover Discovery Sport 2.2 SD4, 190 PS and 430 Nm
 * 2011–2014 Land Rover Freelander 2 2.2 eD4, 150 PS and 400 Nm
 * 2006–2014 Land Rover Freelander 2 2.2 TD4, 160 PS and 400 Nm
 * 2006–2014 Land Rover Freelander 2 2.2 SD4, 190 PS and 430 Nm
 * 2011–2012 Jaguar XF 2.2 TDi4 ,190 PS and 450 Nm
 * 2012–2015 Jaguar XF 2.2 TDi4 ,200 PS and 450 Nm
 * 2006–2010 Citroën C5 2.2 HDi, 172 PS and 370 Nm
 * 2006–2010 Citroën C6 2.2 HDi, 172 PS and 370 Nm
 * 2006–2010 Citroën C8 2.2 HDi, 172 PS and 370 Nm
 * 2006–2012 Citroën C-Crosser 2.2 HDi, 160 PS and 370 Nm
 * 2006–2010 Fiat Ulysse 2.2 D Multijet, 172 PS and 370 Nm
 * 2007–2010 Peugeot 407 2.2 HDi, 172 PS and 370 Nm
 * 2007–2010 Peugeot 607 2.2 HDi, 172 PS and 370 Nm
 * 2007–2010 Peugeot 807 2.2 HDi, 172 PS and 370 Nm
 * 2007–2012 Peugeot 4007 2.2 HDi, 160 PS and 370 Nm
 * 2007-2012 Mitsubishi Outlander 2.2 HDi, 160 PS and 370 Nm

AJD-V6/DT17
The 2720 cc V6 is built by Ford and Jaguar Cars at their Dagenham facility, and was designed by Ford engineers at their Dunton and Whitley product development centres. It is called AJD-V6 by Jaguar and DT17 by PSA Peugeot Citroën.

Ford and PSA extended their Diesel engine joint-venture in October, 1999, to include this V6 engine.

Applications:
 * 2006–2009 Citroën C6 2.7 V6 HDi, 204 PS and 440 Nm
 * 2008–2009 Citroën C5 2.7 V6 HDi, 204 PS and 440 Nm
 * 2004–2008 Jaguar S-Type 2.7 DV6, 204 PS and 440 Nm
 * 2005–2010 Jaguar XJ TDVi 2.7, 204 PS and 440 Nm
 * 2008–2009 Jaguar XF 2.7D, 204 PS and 440 Nm
 * 2005–2010 Land Rover Discovery Tdv6, 190 PS and 440 Nm
 * 2006–2009 Land Rover Range Rover Sport Tdv6, 190 PS and 440 Nm
 * 2005–2012 Peugeot 407 Coupé 2.7 V6 HDi, 204 PS and 440 Nm
 * 2004–2010 Peugeot 407 Touring 2.7 V6 HDi, 204 PS and 440 Nm
 * 2005–2011 Peugeot 607 2.7 V6 HDi, 204 PS and 440 Nm
 * 2011–2016 Ford Territory 2.7 V6 TCDi, 190 PS and 440 Nm

AJD-V8
The 3.6 L V8 is built at Ford's engine plant in Dagenham, Essex. It is a twin-turbocharged Diesel V8 producing 270 PS and 640 Nm. Production began in April 2006. It is closely related to the 2.7L V6 version (same bore & stroke) and was designed at Ford Otosan's R&D Center in Gebze, Turkey and Ford's Dagenham Diesel Centre product development site, with input from Land Rover powertrain team. A 4.4 litre variant that produces 250 kW and 700 Nm is built at Ford's Chihuahua Engine plant in Mexico.

Applications (4.4 L variant):
 * 2010–2020 Land Rover Range Rover
 * 2013–2020 Land Rover Range Rover Sport