Germanium

Germanium is a chemical element; it has symbol Ge and atomic number 32. It is lustrous, hard-brittle, grayish-white and similar in appearance to silicon. It is a metalloid (more rarely considered a metal) in the carbon group that is chemically similar to its group neighbors silicon and tin. Like silicon, germanium naturally reacts and forms complexes with oxygen in nature.

Because it seldom appears in high concentration, germanium was found comparatively late in the discovery of the elements. Germanium ranks 50th in abundance of the elements in the Earth's crust. In 1869, Dmitri Mendeleev predicted its existence and some of its properties from its position on his periodic table, and called the element ekasilicon. On February 6, 1886, Clemens Winkler at Freiberg University found the new element, along with silver and sulfur, in the mineral argyrodite. Winkler named the element after his country of birth, Germany. Germanium is mined primarily from sphalerite (the primary ore of zinc), though germanium is also recovered commercially from silver, lead, and copper ores.

Elemental germanium is used as a semiconductor in transistors and various other electronic devices. Historically, the first decade of semiconductor electronics was based entirely on germanium. Presently, the major end uses are fibre-optic systems, infrared optics, solar cell applications, and light-emitting diodes (LEDs). Germanium compounds are also used for polymerization catalysts and have most recently found use in the production of nanowires. This element forms a large number of organogermanium compounds, such as tetraethylgermanium, useful in organometallic chemistry. Germanium is considered a technology-critical element.

Germanium is not thought to be an essential element for any living organism. Similar to silicon and aluminium, naturally-occurring germanium compounds tend to be insoluble in water and thus have little oral toxicity. However, synthetic soluble germanium salts are nephrotoxic, and synthetic chemically reactive germanium compounds with halogens and hydrogen are irritants and toxins.

History
In his report on The Periodic Law of the Chemical Elements in 1869, the Russian chemist Dmitri Mendeleev predicted the existence of several unknown chemical elements, including one that would fill a gap in the carbon family, located between silicon and tin. Because of its position in his periodic table, Mendeleev called it ekasilicon (Es), and he estimated its atomic weight to be 70 (later 72).

In mid-1885, at a mine near Freiberg, Saxony, a new mineral was discovered and named argyrodite because of its high silver content. The chemist Clemens Winkler analyzed this new mineral, which proved to be a combination of silver, sulfur, and a new element. Winkler was able to isolate the new element in 1886 and found it similar to antimony. He initially considered the new element to be eka-antimony, but was soon convinced that it was instead eka-silicon. Before Winkler published his results on the new element, he decided that he would name his element neptunium, since the recent discovery of planet Neptune in 1846 had similarly been preceded by mathematical predictions of its existence. However, the name "neptunium" had already been given to another proposed chemical element (though not the element that today bears the name neptunium, which was discovered in 1940). So instead, Winkler named the new element germanium (from the Latin word, Germania, for Germany) in honor of his homeland. Argyrodite proved empirically to be Ag8GeS6. Because this new element showed some similarities with the elements arsenic and antimony, its proper place in the periodic table was under consideration, but its similarities with Dmitri Mendeleev's predicted element "ekasilicon" confirmed that place on the periodic table. With further material from 500 kg of ore from the mines in Saxony, Winkler confirmed the chemical properties of the new element in 1887. He also determined an atomic weight of 72.32 by analyzing pure germanium tetrachloride, while Lecoq de Boisbaudran deduced 72.3 by a comparison of the lines in the spark spectrum of the element.

Winkler was able to prepare several new compounds of germanium, including fluorides, chlorides, sulfides, dioxide, and tetraethylgermane (Ge(C2H5)4), the first organogermane. The physical data from those compounds—which corresponded well with Mendeleev's predictions—made the discovery an important confirmation of Mendeleev's idea of element periodicity. Here is a comparison between the prediction and Winkler's data:

Until the late 1930s, germanium was thought to be a poorly conducting metal. Germanium did not become economically significant until after 1945 when its properties as an electronic semiconductor were recognized. During World War II, small amounts of germanium were used in some special electronic devices, mostly diodes. The first major use was the point-contact Schottky diodes for radar pulse detection during the War. The first silicon–germanium alloys were obtained in 1955. Before 1945, only a few hundred kilograms of germanium were produced in smelters each year, but by the end of the 1950s, the annual worldwide production had reached 40 MT.

The development of the germanium transistor in 1948 opened the door to countless applications of solid state electronics. From 1950 through the early 1970s, this area provided an increasing market for germanium, but then high-purity silicon began replacing germanium in transistors, diodes, and rectifiers. For example, the company that became Fairchild Semiconductor was founded in 1957 with the express purpose of producing silicon transistors. Silicon has superior electrical properties, but it requires much greater purity that could not be commercially achieved in the early years of semiconductor electronics.

Meanwhile, the demand for germanium for fiber optic communication networks, infrared night vision systems, and polymerization catalysts increased dramatically. These end uses represented 85% of worldwide germanium consumption in 2000. The US government even designated germanium as a strategic and critical material, calling for a 146 ton (132 tonne) supply in the national defense stockpile in 1987.

Germanium differs from silicon in that the supply is limited by the availability of exploitable sources, while the supply of silicon is limited only by production capacity since silicon comes from ordinary sand and quartz. While silicon could be bought in 1998 for less than $10 per kg, the price of germanium was almost $800 per kg.

Characteristics
Under standard conditions, germanium is a brittle, silvery-white, semi-metallic element. This form constitutes an allotrope known as α-germanium, which has a metallic luster and a diamond cubic crystal structure, the same as silicon and diamond. While in crystal form, germanium has a displacement threshold energy of $$19.7^{+0.6}_{-0.5}~\text{eV}$$. At pressures above 120 kbar, germanium becomes the allotrope β-germanium with the same structure as β-tin. Like silicon, gallium, bismuth, antimony, and water, germanium is one of the few substances that expands as it solidifies (i.e. freezes) from the molten state.

Germanium is a semiconductor having an indirect bandgap, as is crystalline silicon. Zone refining techniques have led to the production of crystalline germanium for semiconductors that has an impurity of only one part in 1010, making it one of the purest materials ever obtained. The first semi-metallic material discovered (in 2005) to become a superconductor in the presence of an extremely strong electromagnetic field was an alloy of germanium, uranium, and rhodium.

Pure germanium is known to spontaneously extrude very long screw dislocations, referred to as germanium whiskers. The growth of these whiskers is one of the primary reasons for the failure of older diodes and transistors made from germanium, as, depending on what they eventually touch, they may lead to an electrical short.

Chemistry
Elemental germanium starts to oxidize slowly in air at around 250 °C, forming GeO2. Germanium is insoluble in dilute acids and alkalis but dissolves slowly in hot concentrated sulfuric and nitric acids and reacts violently with molten alkalis to produce germanates. Germanium occurs mostly in the oxidation state +4 although many +2 compounds are known. Other oxidation states are rare: +3 is found in compounds such as Ge2Cl6, and +3 and +1 are found on the surface of oxides, or negative oxidation states in germanides, such as −4 in. Germanium cluster anions (Zintl ions) such as Ge42−, Ge94−, Ge92−, [(Ge9)2]6− have been prepared by the extraction from alloys containing alkali metals and germanium in liquid ammonia in the presence of ethylenediamine or a cryptand. The oxidation states of the element in these ions are not integers—similar to the ozonides O3−.

Two oxides of germanium are known: germanium dioxide (, germania) and germanium monoxide,. The dioxide, GeO2, can be obtained by roasting germanium disulfide, and is a white powder that is only slightly soluble in water but reacts with alkalis to form germanates. The monoxide, germanous oxide, can be obtained by the high temperature reaction of GeO2 with elemental Ge. The dioxide (and the related oxides and germanates) exhibits the unusual property of having a high refractive index for visible light, but transparency to infrared light. Bismuth germanate, Bi4Ge3O12 (BGO), is used as a scintillator.

Binary compounds with other chalcogens are also known, such as the disulfide and diselenide, and the monosulfide (GeS), monoselenide (GeSe), and monotelluride (GeTe). GeS2 forms as a white precipitate when hydrogen sulfide is passed through strongly acid solutions containing Ge(IV). The disulfide is appreciably soluble in water and in solutions of caustic alkalis or alkaline sulfides. Nevertheless, it is not soluble in acidic water, which allowed Winkler to discover the element. By heating the disulfide in a current of hydrogen, the monosulfide (GeS) is formed, which sublimes in thin plates of a dark color and metallic luster, and is soluble in solutions of the caustic alkalis. Upon melting with alkaline carbonates and sulfur, germanium compounds form salts known as thiogermanates.

Four tetrahalides are known. Under normal conditions GeI4 is a solid, GeF4 a gas and the others volatile liquids. For example, germanium tetrachloride, GeCl4, is obtained as a colorless fuming liquid boiling at 83.1 °C by heating the metal with chlorine. All the tetrahalides are readily hydrolyzed to hydrated germanium dioxide. GeCl4 is used in the production of organogermanium compounds. All four dihalides are known and in contrast to the tetrahalides are polymeric solids. Additionally Ge2Cl6 and some higher compounds of formula GenCl2n+2 are known. The unusual compound Ge6Cl16 has been prepared that contains the Ge5Cl12 unit with a neopentane structure.

Germane (GeH4) is a compound similar in structure to methane. Polygermanes—compounds that are similar to alkanes—with formula GenH2n+2 containing up to five germanium atoms are known. The germanes are less volatile and less reactive than their corresponding silicon analogues. GeH4 reacts with alkali metals in liquid ammonia to form white crystalline MGeH3 which contain the GeH3− anion. The germanium hydrohalides with one, two and three halogen atoms are colorless reactive liquids.

The first organogermanium compound was synthesized by Winkler in 1887; the reaction of germanium tetrachloride with diethylzinc yielded tetraethylgermane. Organogermanes of the type R4Ge (where R is an alkyl) such as tetramethylgermane and tetraethylgermane are accessed through the cheapest available germanium precursor germanium tetrachloride and alkyl nucleophiles. Organic germanium hydrides such as isobutylgermane were found to be less hazardous and may be used as a liquid substitute for toxic germane gas in semiconductor applications. Many germanium reactive intermediates are known: germyl free radicals, germylenes (similar to carbenes), and germynes (similar to carbynes). The organogermanium compound 2-carboxyethylgermasesquioxane was first reported in the 1970s, and for a while was used as a dietary supplement and thought to possibly have anti-tumor qualities.

Using a ligand called Eind (1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl) germanium is able to form a double bond with oxygen (germanone). Germanium hydride and germanium tetrahydride are very flammable and even explosive when mixed with air.

Isotopes
Germanium occurs in five natural isotopes: 70Germanium, 72Germanium, 73Germanium, 74Germanium, and 76Germanium. Of these, 76Germanium is very slightly radioactive, decaying by double beta decay with a half-life of $1.78 years$. 74Germanium is the most common isotope, having a natural abundance of approximately 36%. 76Germanium is the least common with a natural abundance of approximately 7%. When bombarded with alpha particles, the isotope 72Germanium will generate stable 77Selenium, releasing high energy electrons in the process. Because of this, it is used in combination with radon for nuclear batteries.

At least 27 radioisotopes have also been synthesized, ranging in atomic mass from 58 to 89. The most stable of these is 68Germanium, decaying by electron capture with a half-life of $270.95 days$ays. The least stable is 60Germanium, with a half-life of $30 ms$. While most of germanium's radioisotopes decay by beta decay, 61Germanium and 64Germanium decay by Positron emission delayed proton emission. 84Germanium through 87Germanium isotopes also exhibit minor Beta decay delayed neutron emission decay paths.

Occurrence
Germanium is created by stellar nucleosynthesis, mostly by the s-process in asymptotic giant branch stars. The s-process is a slow neutron capture of lighter elements inside pulsating red giant stars. Germanium has been detected in some of the most distant stars and in the atmosphere of Jupiter.

Germanium's abundance in the Earth's crust is approximately 1.6 ppm. Only a few minerals like argyrodite, briartite, germanite, renierite and sphalerite contain appreciable amounts of germanium. Only few of them (especially germanite) are, very rarely, found in mineable amounts. Some zinc–copper–lead ore bodies contain enough germanium to justify extraction from the final ore concentrate. An unusual natural enrichment process causes a high content of germanium in some coal seams, discovered by Victor Moritz Goldschmidt during a broad survey for germanium deposits. The highest concentration ever found was in Hartley coal ash with as much as 1.6% germanium. The coal deposits near Xilinhaote, Inner Mongolia, contain an estimated 1600 tonnes of germanium.

Production
About 118 tonnes of germanium were produced in 2011 worldwide, mostly in China (80 t), Russia (5 t) and United States (3 t). Germanium is recovered as a by-product from sphalerite zinc ores where it is concentrated in amounts as great as 0.3%, especially from low-temperature sediment-hosted, massive Zn–Pb–Cu(–Ba) deposits and carbonate-hosted Zn–Pb deposits. A recent study found that at least 10,000 t of extractable germanium is contained in known zinc reserves, particularly those hosted by Mississippi-Valley type deposits, while at least 112,000 t will be found in coal reserves. In 2007 35% of the demand was met by recycled germanium.

While it is produced mainly from sphalerite, it is also found in silver, lead, and copper ores. Another source of germanium is fly ash of power plants fueled from coal deposits that contain germanium. Russia and China used this as a source for germanium. Russia's deposits are located in the far east of Sakhalin Island, and northeast of Vladivostok. The deposits in China are located mainly in the lignite mines near Lincang, Yunnan; coal is also mined near Xilinhaote, Inner Mongolia.

The ore concentrates are mostly sulfidic; they are converted to the oxides by heating under air in a process known as roasting:


 * GeS2 + 3 O2 → GeO2 + 2 SO2

Some of the germanium is left in the dust produced, while the rest is converted to germanates, which are then leached (together with zinc) from the cinder by sulfuric acid. After neutralization, only the zinc stays in solution while germanium and other metals precipitate. After removing some of the zinc in the precipitate by the Waelz process, the residing Waelz oxide is leached a second time. The dioxide is obtained as precipitate and converted with chlorine gas or hydrochloric acid to germanium tetrachloride, which has a low boiling point and can be isolated by distillation:


 * GeO2 + 4 HCl → GeCl4 + 2 H2O
 * GeO2 + 2 Cl2 → GeCl4 + O2

Germanium tetrachloride is either hydrolyzed to the oxide (GeO2) or purified by fractional distillation and then hydrolyzed. The highly pure GeO2 is now suitable for the production of germanium glass. It is reduced to the element by reacting it with hydrogen, producing germanium suitable for infrared optics and semiconductor production:


 * GeO2 + 2 H2 → Ge + 2 H2O

The germanium for steel production and other industrial processes is normally reduced using carbon:


 * GeO2 + C → Ge + CO2

Applications
The major end uses for germanium in 2007, worldwide, were estimated to be: 35% for fiber-optics, 30% infrared optics, 15% polymerization catalysts, and 15% electronics and solar electric applications. The remaining 5% went into such uses as phosphors, metallurgy, and chemotherapy.

Optics
The notable properties of germania (GeO2) are its high index of refraction and its low optical dispersion. These make it especially useful for wide-angle camera lenses, microscopy, and the core part of optical fibers. It has replaced titania as the dopant for silica fiber, eliminating the subsequent heat treatment that made the fibers brittle. At the end of 2002, the fiber optics industry consumed 60% of the annual germanium use in the United States, but this is less than 10% of worldwide consumption. GeSbTe is a phase change material used for its optic properties, such as that used in rewritable DVDs.

Because germanium is transparent in the infrared wavelengths, it is an important infrared optical material that can be readily cut and polished into lenses and windows. It is especially used as the front optic in thermal imaging cameras working in the 8 to 14 micron range for passive thermal imaging and for hot-spot detection in military, mobile night vision, and fire fighting applications. It is used in infrared spectroscopes and other optical equipment that require extremely sensitive infrared detectors. It has a very high refractive index (4.0) and must be coated with anti-reflection agents. Particularly, a very hard special antireflection coating of diamond-like carbon (DLC), refractive index 2.0, is a good match and produces a diamond-hard surface that can withstand much environmental abuse.

Electronics
Germanium can be alloyed with silicon, and silicon–germanium alloys are rapidly becoming an important semiconductor material for high-speed integrated circuits. Circuits utilizing the properties of Si-SiGe heterojunctions can be much faster than those using silicon alone. The SiGe chips, with high-speed properties, can be made with low-cost, well-established production techniques of the silicon chip industry.

High efficiency solar panels are a major use of germanium. Because germanium and gallium arsenide have nearly identical lattice constant, germanium substrates can be used to make gallium-arsenide solar cells. Germanium is the substrate of the wafers for high-efficiency multijunction photovoltaic cells for space applications, such as the Mars Exploration Rovers, which use triple-junction gallium arsenide on germanium cells. High-brightness LEDs, used for automobile headlights and to backlight LCD screens, are also an important application.

Germanium-on-insulator (GeOI) substrates are seen as a potential replacement for silicon on miniaturized chips. CMOS circuit based on GeOI substrates has been reported recently. Other uses in electronics include phosphors in fluorescent lamps and solid-state light-emitting diodes (LEDs). Germanium transistors are still used in some effects pedals by musicians who wish to reproduce the distinctive tonal character of the "fuzz"-tone from the early rock and roll era, most notably the Dallas Arbiter Fuzz Face.

Germanium has been studied as a potential material for implantable bioelectronic sensors that are resorbed in the body without generating harmful hydrogen gas, replacing zinc oxide- and indium gallium zinc oxide-based implementations.

Other uses
Germanium dioxide is also used in catalysts for polymerization in the production of polyethylene terephthalate (PET). The high brilliance of this polyester is especially favored for PET bottles marketed in Japan. In the United States, germanium is not used for polymerization catalysts.

Due to the similarity between silica (SiO2) and germanium dioxide (GeO2), the silica stationary phase in some gas chromatography columns can be replaced by GeO2.

In recent years germanium has seen increasing use in precious metal alloys. In sterling silver alloys, for instance, it reduces firescale, increases tarnish resistance, and improves precipitation hardening. A tarnish-proof silver alloy trademarked Argentium contains 1.2% germanium.

Semiconductor detectors made of single crystal high-purity germanium can precisely identify radiation sources—for example in airport security. Germanium is useful for monochromators for beamlines used in single crystal neutron scattering and synchrotron X-ray diffraction. The reflectivity has advantages over silicon in neutron and high energy X-ray applications. Crystals of high purity germanium are used in detectors for gamma spectroscopy and the search for dark matter. Germanium crystals are also used in X-ray spectrometers for the determination of phosphorus, chlorine and sulfur.

Germanium is emerging as an important material for spintronics and spin-based quantum computing applications. In 2010, researchers demonstrated room temperature spin transport and more recently donor electron spins in germanium has been shown to have very long coherence times.

Strategic importance
Due to its use in advanced electronics and optics, Germanium is considered a technology-critical element (by e.g. the European Union), essential to fulfill the green and digital transition. As China controls 60% of global Germanium production it holds a dominant position over the world's supply chains.

On 3 July 2023 China suddenly imposed restrictions on the exports of germanium (and gallium), ratcheting up trade tensions with Western allies. Invoking "national security interests," the Chinese Ministry of Commerce informed that companies that intend to sell products containing germanium would need an export licence. The products/compounds targeted are: germanium dioxide, germanium epitaxial growth substrate, germanium ingot, germanium metal, germanium tetrachloride and zinc germanium phosphide. It sees such products as "dual-use" items that may have military purposes and therefore warrant an extra layer of oversight.

The new dispute opened a new chapter in the increasingly fierce technology race that has pitted the United States, and to a lesser extent Europe, against China. The US wants its allies to heavily curb, or downright prohibit, advanced electronic components bound to the Chinese market in order to prevent Beijing from securing global technology supremacy. China denied any tit-for-tat intention behind the Germanium export restrictions.

Following China's export restrictions, Russian state-owned company Rostec announced an increase in germanium production to meet domestic demand.

Germanium and health
Germanium is not considered essential to the health of plants or animals. Germanium in the environment has little or no health impact. This is primarily because it usually occurs only as a trace element in ores and carbonaceous materials, and the various industrial and electronic applications involve very small quantities that are not likely to be ingested. For similar reasons, end-use germanium has little impact on the environment as a biohazard. Some reactive intermediate compounds of germanium are poisonous (see precautions, below).

Germanium supplements, made from both organic and inorganic germanium, have been marketed as an alternative medicine capable of treating leukemia and lung cancer. There is, however, no medical evidence of benefit; some evidence suggests that such supplements are actively harmful. U.S. Food and Drug Administration (FDA) research has concluded that inorganic germanium, when used as a nutritional supplement, "presents potential human health hazard".

Some germanium compounds have been administered by alternative medical practitioners as non-FDA-allowed injectable solutions. Soluble inorganic forms of germanium used at first, notably the citrate-lactate salt, resulted in some cases of renal dysfunction, hepatic steatosis, and peripheral neuropathy in individuals using them over a long term. Plasma and urine germanium concentrations in these individuals, several of whom died, were several orders of magnitude greater than endogenous levels. A more recent organic form, beta-carboxyethylgermanium sesquioxide (propagermanium), has not exhibited the same spectrum of toxic effects.

Certain compounds of germanium have low toxicity to mammals, but have toxic effects against certain bacteria.

Precautions for chemically reactive germanium compounds
While use of germanium itself does not require precautions, some of germanium's artificially produced compounds are quite reactive and present an immediate hazard to human health on exposure. For example, Germanium tetrachloride and germane (GeH4) are a liquid and gas, respectively, that can be very irritating to the eyes, skin, lungs, and throat.