Haptic technology

Haptic technology (also kinaesthetic communication or 3D touch) is technology that can create an experience of touch by applying forces, vibrations, or motions to the user. These technologies can be used to create virtual objects in a computer simulation, to control virtual objects, and to enhance remote control of machines and devices (telerobotics). Haptic devices may incorporate tactile sensors that measure forces exerted by the user on the interface. The word haptic, from the ἁπτικός (haptikos), means "tactile, pertaining to the sense of touch". Simple haptic devices are common in the form of game controllers, joysticks, and steering wheels.

Haptic technology facilitates investigation of how the human sense of touch works by allowing the creation of controlled haptic virtual objects. Most researchers distinguish three sensory systems related to sense of touch in humans: cutaneous, kinaesthetic and haptic. All perceptions mediated by cutaneous and kinaesthetic sensibility are referred to as tactual perception. The sense of touch may be classified as passive and active, and the term "haptic" is often associated with active touch to communicate or recognize objects.

History
One of the earliest applications of haptic technology was in large aircraft that use servomechanism systems to operate control surfaces. In lighter aircraft without servo systems, as the aircraft approached a stall, the aerodynamic buffeting (vibrations) was felt in the pilot's controls. This was a useful warning of a dangerous flight condition. Servo systems tend to be "one-way", meaning external forces applied aerodynamically to the control surfaces are not perceived at the controls, resulting in the lack of this important sensory cue. To address this, the missing normal forces are simulated with springs and weights. The angle of attack is measured, and as the critical stall point approaches a stick shaker is engaged which simulates the response of a simpler control system. Alternatively, the servo force may be measured and the signal directed to a servo system on the control, also known as force feedback. Force feedback has been implemented experimentally in some excavators and is useful when excavating mixed material such as large rocks embedded in silt or clay. It allows the operator to "feel" and work around unseen obstacles.

In the 1960s, Paul Bach-y-Rita developed a vision substitution system using a 20x20 array of metal rods that could be raised and lowered, producing tactile "dots" analogous to the pixels of a screen. People sitting in a chair equipped with this device could identify pictures from the pattern of dots poked into their backs.

The first US patent for a tactile telephone was granted to Thomas D. Shannon in 1973. An early tactile man-machine communication system was constructed by A. Michael Noll at Bell Telephone Laboratories, Inc. in the early 1970s and a patent was issued for his invention in 1975.

In 1994, the Aura Interactor vest was developed. The vest is a wearable force-feedback device that monitors an audio signal and uses electromagnetic actuator technology to convert bass sound waves into vibrations that can represent such actions as a punch or kick. The vest plugs into the audio output of a stereo, TV, or VCR and the audio signal is reproduced through a speaker embedded in the vest. In 1995, Thomas Massie developed the PHANToM (Personal HAptic iNTerface Mechanism) system. It used thimble-like receptacles at the end of computerized arms into which a person's fingers could be inserted, allowing them to "feel" an object on a computer screen.

In 1995, Norwegian Geir Jensen described a wristwatch haptic device with a skin tap mechanism, termed Tap-in. The wristwatch would connect to a mobile phone via Bluetooth, and tapping-frequency patterns would enable the wearer to respond to callers with selected short messages.

In 2015, the Apple Watch was launched. It uses skin tap sensing to deliver notifications and alerts from the mobile phone of the watch wearer.

Types of mechanical touch sensing
Human sensing of mechanical loading in the skin is managed by Mechanoreceptors. There are a number of types of mechanoreceptors but those present in the finger pad are typically placed into two categories. Fast acting (FA) and slow acting (SA). SA mechanoreceptors are sensitive to relatively large stresses and at low frequencies while FA mechanoreceptors are sensitive to smaller stresses at higher frequencies. The result of this is that generally SA sensors can detect textures with amplitudes greater than 200 micrometers and FA sensors can detect textures with amplitudes less than 200 micrometers down to about 1 micrometer, though some research suggests that FA can only detect textures smaller than the fingerprint wavelength. FA mechanoreceptors achieve this high resolution of sensing by sensing vibrations produced by friction and an interaction of the fingerprint texture moving over fine surface texture.

Implementation
Haptic feedback (often shortened to just haptics) is controlled vibrations at set frequencies and intervals to provide a sensation representative of an in-game action; this includes 'bumps', 'knocks', and 'tap' of one's hand or fingers.

The majority of electronics offering haptic feedback use vibrations, and most use a type of eccentric rotating mass (ERM) actuator, consisting of an unbalanced weight attached to a motor shaft. As the shaft rotates, the spinning of this irregular mass causes the actuator and the attached device to shake. Piezoelectric actuators are also employed to produce vibrations, and offer even more precise motion than LRAs, with less noise and in a smaller platform, but require higher voltages than do ERMs and LRAs.

Controller rumble
One of the most common forms of haptic feedback in video games is controller rumble. In 1976, Sega's motorbike game Moto-Cross, also known as Fonz, was the first game to use haptic feedback, causing the handlebars to vibrate during a collision with another vehicle.

Force feedback
Force feedback devices use motors to manipulate the movement of an item held by the user. A common use is in automobile driving video games and simulators, which turn the steering wheel to simulate forces experienced when cornering a real vehicle. Direct-drive wheels, introduced in 2013, are based on servomotors and are the most high-end, for strength and fidelity, type of force feedback racing wheels.

In 2007, Novint released the Falcon, the first consumer 3D touch device with high resolution three-dimensional force feedback. This allowed the haptic simulation of objects, textures, recoil, momentum, and the physical presence of objects in games.

Air vortex rings
Air vortex rings are donut-shaped air pockets made up of concentrated gusts of air. Focused air vortices can have the force to blow out a candle or disturb papers from a few yards away. Both Microsoft Research (AirWave) and Disney Research (AIREAL) have used air vortices to deliver non-contact haptic feedback.

Ultrasound
Focused ultrasound beams can be used to create a localized sense of pressure on a finger without touching any physical object. The focal point that creates the sensation of pressure is generated by individually controlling the phase and intensity of each transducer in an array of ultrasound transducers. These beams can also be used to deliver sensations of vibration, and to give users the ability to feel virtual 3D objects. The first commercially available ultrasound device was the Stratos Explore by Ultrahaptics that consisted of 256-transducer array board and a Leap motion controller for hand tracking

Another form of tactile feed back results from active touch when a human scans (runs their finger over a surface) to gain information about a surfaces texture. A significant amount of information about a surfaces texture on the micro meter scale can be gathered through this action as vibrations resulting from friction and texture activate mechanoreceptors in the human skin. Towards this goal plates can be made to vibrate at an ultrasonic frequency which reduces the friction between the plate and skin.

Electrical stimulation
Electrical muscle stimulation (EMS) and transcutaneous electrical nerve stimulation (TENS) can be used to create haptic sensations in the skin or muscles. Most notable examples include haptic suits Tesla suit, Owo haptic vest and wearable armbands Valkyrie EIR. In addition to improving immersion, e.g. by simulating bullet hits, these technologies are sought to create sensations similar to weight and resistance, and can promote muscle training.

Telepresence
Haptic feedback is essential to perform complex tasks via telepresence. The Shadow Hand, an advanced robotic hand, has a total of 129 touch sensors embedded in every joint and finger pad that relay information to the operator. This allows tasks such as typing to be performed from a distance. An early prototype can be seen in NASA's collection of humanoid robots, or robonauts.

Teleoperation
Teleoperators are remote controlled robotic tools. When the operator is given feedback on the forces involved, this is called haptic teleoperation. The first electrically actuated teleoperators were built in the 1950s at the Argonne National Laboratory by Raymond Goertz to remotely handle radioactive substances. Since then, the use of force feedback has become more widespread in other kinds of teleoperators, such as remote-controlled underwater exploration devices.

Devices such as medical simulators and flight simulators ideally provide the force feedback that would be felt in real life. Simulated forces are generated using haptic operator controls, allowing data representing touch sensations to be saved or played back.

Medicine and dentistry
Haptic interfaces for medical simulation are being developed for training in minimally invasive procedures such as laparoscopy and interventional radiology, and for training dental students. A Virtual Haptic Back (VHB) was successfully integrated in the curriculum at the Ohio University College of Osteopathic Medicine. Haptic technology has enabled the development of telepresence surgery, allowing expert surgeons to operate on patients from a distance. As the surgeon makes an incision, they feel tactile and resistance feedback as if working directly on the patient.

Automotive
With the introduction of large touchscreen control panels in vehicle dashboards, haptic feedback technology is used to provide confirmation of touch commands without needing the driver to take their eyes off the road. Additional contact surfaces, for example the steering wheel or seat, can also provide haptic information to the driver, for example, a warning vibration pattern when close to other vehicles.

Aviation
Force-feedback can be used to increase adherence to a safe flight envelope and thus reduce the risk of pilots entering dangerous states of flights outside the operational borders while maintaining the pilots' final authority and increasing their situation awareness.

Video games
Haptic feedback is commonly used in arcade games, especially racing video games. In 1976, Sega's motorbike game Moto-Cross, also known as Fonz, was the first game to use haptic feedback, causing the handlebars to vibrate during a collision with another vehicle. Tatsumi's TX-1 introduced force feedback to car driving games in 1983. The game Earthshaker! added haptic feedback to a pinball machine in 1989.

Simple haptic devices are common in the form of game controllers, joysticks, and steering wheels. Early implementations were provided through optional components, such as the Nintendo 64 controller's Rumble Pak in 1997. In the same year, the Microsoft SideWinder Force Feedback Pro with built-in feedback was released by Immersion Corporation. Many console controllers and joysticks feature built-in feedback devices, which are motors with unbalanced weights that spin, causing it to vibrate, including Sony's DualShock technology and Microsoft's Impulse Trigger technology. Some automobile steering wheel controllers, for example, are programmed to provide a "feel" of the road. As the user makes a turn or accelerates, the steering wheel responds by resisting turns or slipping out of control.

Notable introductions include:


 * 2013: The first direct-drive wheel for sim racing is introduced.
 * 2014: A new type of haptic cushion that responds to multimedia inputs by LG Electronics.
 * 2015: Steam Machines (console-like PCs) by Valve include a new Steam Controller that uses weighted electromagnets capable of delivering a wide range of haptic feedback via the unit's trackpads. These controllers' feedback systems are user-configurable, delivering precise feedback with haptic force actuators on both sides of the controller.
 * 2017: The Nintendo Switch's Joy-Con introduced the HD Rumble feature, developed with Immersion Corporation and using Alps actuators.
 * 2018: The Razer Nari Ultimate, gaming headphones using a pair of wide frequency haptic drivers, developed by Lofelt.
 * 2020: The Sony PlayStation 5 DualSense controllers supports vibrotactile haptic provided by voice coil actuators integrated in the palm grips, and force feedback for the Adaptive Triggers provided by two DC rotary motors. The actuators in the hand grip are able to give varied and intuitive feedback about in-game actions; for example, in a sandstorm, you can feel the wind and sand, and the motors in the Adaptive Triggers support experiences such as virtually drawing an arrow from a bow.
 * 2021, SuperTuxKart 1.3 was released, it has support for force feedback. Force feedback is extremely uncommon for free software games.

Mobile devices
Tactile haptic feedback is common in cellular devices. In most cases, this takes the form of vibration response to touch. Alpine Electronics uses a haptic feedback technology named PulseTouch on many of their touch-screen car navigation and stereo units. The Nexus One features haptic feedback, according to their specifications. Samsung first launched a phone with haptics in 2007.

Surface haptics refers to the production of variable forces on a user's finger as it interacts with a surface such as a touchscreen.

Notable introductions include:
 * Tanvas uses an electrostatic technology to control the in-plane forces experienced by a fingertip, as a programmable function of the finger's motion. The TPaD Tablet Project uses an ultrasonic technology to modulate the apparent slipperiness of a glass touchscreen.
 * In 2013, Apple Inc. was awarded the patent for a haptic feedback system that is suitable for multitouch surfaces. Apple's U.S. Patent for a "Method and apparatus for localization of haptic feedback" describes a system where at least two actuators are positioned beneath a multitouch input device, providing vibratory feedback when a user makes contact with the unit. Specifically, the patent provides for one actuator to induce a feedback vibration, while at least one other actuator uses its vibrations to localize the haptic experience by preventing the first set of vibrations from propagating to other areas of the device. The patent gives the example of a "virtual keyboard," however, it is also noted that the invention can be applied to any multitouch interface. Apple's iPhones (and MacBooks) featuring the "Taptic Engine", accomplish their vibrations with a linear resonant actuator (LRA), which moves a mass in a reciprocal manner by means of a magnetic voice coil, similar to how AC electrical signals are translated into motion in the cone of a loudspeaker. LRAs are capable of quicker response times than ERMs, and thus can transmit more accurate haptic imagery.

Virtual reality
Haptics are gaining widespread acceptance as a key part of virtual reality systems, adding the sense of touch to previously visual-only interfaces. Systems are being developed to use haptic interfaces for 3D modeling and design, including systems that allow holograms to be both seen and felt. Several companies are making full-body or torso haptic vests or haptic suits for use in immersive virtual reality to allow users to feel explosions and bullet impacts.

Personal computers
In 2015, Apple Inc.'s MacBook and MacBook Pro started incorporating a "Tactile Touchpad" design with button functionality and haptic feedback incorporated into the tracking surface.

Sound substitution
In December 2015 David Eagleman demonstrated a wearable vest that "translates" speech and other audio signals into series of vibrations, this allowed hearing-impaired people to "feel" sounds on their body, it has since been made commercially as a wristband.

Tactile electronic displays
A tactile electronic display is a display device that delivers text and graphical information using the sense of touch. Devices of this kind have been developed to assist blind or deaf users by providing an alternative to visual or auditory sensation.

Teledildonics
Haptic feedback is used within teledildonics, or "sex-technology", in order to remotely connect sex toys and allow users to engage in virtual sex or allow a remote server to control their sex toy. The term was first coined by Ted Nelson in 1975, when discussing the future of love, intimacy and technology. In recent years, teledildonics and sex-technology have expanded to include toys with a two-way connection that allow virtual sex through the communication of vibrations, pressures and sensations. Many "smart" vibrators allow for a one-way connection either between the user, or a remote partner, to allow control of the toy.

Neurorehabilitation and balance
For individuals with upper limb motor dysfunction, robotic devices utilizing haptic feedback could be used for neurorehabilitation. Robotic devices, such as end-effectors, and both grounded and ungrounded exoskeletons have been designed to assist in restoring control over several muscle groups. Haptic feedback applied by these robotic devices helps in the recovery of sensory function due to its more immersive nature.

Haptic technology can also provide sensory feedback to ameliorate age-related impairments in balance control and prevent falls in the elderly and balance-impaired. Haptic Cow and Horse are used in veterinary training.

Puzzles
Haptic puzzles have been devised in order to investigate goal-oriented haptic exploration, search, learning and memory in complex 3D environments. The goal is to both enable multi-fingered robots with a sense of touch, and gain more insights into human meta-learning.

Art
Haptic technologies have been explored in virtual arts, such as sound synthesis or graphic design, that make some loose vision and animation. Haptic technology was used to enhance existing art pieces in the Tate Sensorium exhibit in 2015. In music creation, Swedish synthesizer manufacturer Teenage Engineering introduced a haptic subwoofer module for their OP-Z synthesizer allowing musicians to feel the bass frequencies directly on their instrument.

Space
The use of haptic technologies may be useful in space exploration, including visits to the planet Mars, according to news reports.