Hy-Tek Hurricane 103

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

The Hurricane 103 and Ultra 103 designs are intended to have empty weights under 254 lb and fit into the US FAR 103 ultralight category. The remaining designs are heavier and fit into the US Experimental - Amateur-built category.

Development
The Hurricane was originally developed as a clone of the Phantom X1 design by Jack Britton in the late 1980s and marketed under the name Avenger. Following Britton's death the design was acquired by Donnie Eccker who marketed it as the Hurricane. The aircraft was introduced to the market in 1991 and benefited from the end of production of the Phantom that same year. As a result of the timing, the quality of the kits produced and the low price, the aircraft quickly achieved market success.

In 1996 the rights to the design along with the tooling were sold to Hy-Tek. The aircraft is no longer in production.

Design
As a copy of the Phantom X1, the Hurricane family shares its construction. The wings, tail and fuselage are constructed of anodized aluminum tubing, bolted together. The wings and tail surfaces are covered with Dacron envelopes. The wings are supported by cable-bracing from an inverted V-kingpost. The cockpit fairing, or pod, is made from fibreglass. The aircraft features tricycle landing gear. The engine is mounted on the front of the main tube, the tail being mounted on the far end of the same tube.

The kit takes 80-100 hrs to assemble.

Variants

 * Hurricane 103
 * Named for its FAR 103 Ultralight Vehicles compliant empty weight of 252 lb, wingspan of 28.0 ft, semi-symmetrical airfoil, standard engine is the 40 hp Rotax 447.


 * Ultra 103
 * Named for its FAR 103 Ultralight Vehicles compliant empty weight of 250 lb, wingspan of 28.0 ft, flat bottomed high-lift airfoil, standard engine is the 40 hp Rotax 447.


 * Hurricane HP Clipwing
 * Two foot shorter wingspan of 26.0 ft, empty weight of 275 lb puts it in the US Experimental-Amateur-built category, semi-symmetrical airfoil, tested to +8/-6 g, standard engine is the 50 hp Rotax 503.


 * Hurricane Hauler
 * Wingspan of 28.0 ft, empty weight of 285 lb puts it in the US Experimental-Amateur-built category, wider cockpit for larger pilots, tested to +8/-6 g, standard engine is the 50 hp Rotax 503, with the 64 hp Rotax 582 and 60 hp HKS 700E four stroke as options.


 * Hurricane II
 * Two seats in side-by-side seating configuration, with dual controls and dual throttles, sold as an ultralight trainer. The wing is wire-braced from a kingpost. Empty weight of 300 lb, wingspan of 30.0 ft and wing area of 152 sq ft, covered in pre-sewn Dacron envelopes. The wing is fitted with flaps and the elevator features a trim system. The standard engine is the 50 hp Rotax 503.