Italian destroyer Augusto Riboty

Augusto Riboty was one of three Mirabello-class destroyers built for the Regia Marina (Royal Italian Navy) during World War I.

Design and description
The ships were designed as scout cruisers (esploratori), essentially enlarged versions of contemporary destroyers. They had an overall length of 103.75 m, a beam of 9.74 m and a mean draft of 3.3 m. They displaced 1784 t at standard load, and 2040 t at deep load. Their complement was 8 officers and 161 enlisted men.

The Mirabellos were powered by two Parsons geared steam turbines, each driving one propeller shaft using steam supplied by four Yarrow boilers. The turbines were rated at 44000 shp for a speed of 35 kn and Augusto Riboty reached a speed of 35.03 kn from 38962 shp during her sea trials. The ships carried enough fuel oil to give them a range of 2300 nmi at a speed of 12 kn.

Augusto Riboty's main battery consisted of a single Cannone da 152 mm/40 A Modello 1891 gun forward of the superstructure. The gun was backed up by seven Cannone da 102 mm/35 S Modello 1914 guns in single mounts protected by gun shields, one aft the superstructure and the remaining guns positioned on the broadside amidships. Anti-aircraft (AA) defense for the Mirabello-class ships was provided by a pair of Cannone da 76 mm/40 Modello 1916 AA guns in single mounts. They were equipped with four 450 mm torpedo tubes in two twin mounts, one on each broadside. Augusto Riboty could carry 120 mines, although her sisters could only handle 100.

Modifications
The gun proved to be too heavy for the ships and its rate of fire was too slow so it was replaced when the ships were rearmed with eight Cannone da 102/45 S, A Modello 1917 guns arranged with single guns fore and aft of the superstructure and the other on the broadside. The 76 mm guns were replaced by a pair of Cannone da 40 mm/39 AA guns in single mounts in 1920–1922.