Italian destroyer Euro (1927)

Euro was one of eight Turbine-class destroyers built for the Regia Marina (Royal Italian Navy) during the 1920s. She was named after Euro, weak winter easterly wind bringing rain and storms to the Mediterranean.

Design and description
The Turbine-class destroyers were enlarged and improved versions of the preceding Sauro-class destroyer. They had an overall length of 93.2 m, a beam of 9.2 m and a mean draft of 3 m. They displaced 1090 t at standard load, and 1700 t at deep load. Their complement was 12 officers and 167 enlisted men.

The Turbines were powered by two Parsons geared steam turbines, each driving one propeller shaft using steam supplied by three Thornycroft boilers. The turbines were rated at 40000 shp for a speed of 33 kn in service, although Euro reached a speed of 38.9 kn during her sea trials while lightly loaded. They carried enough fuel oil to give them a range of 3200 nmi at a speed of 14 kn.

Their main battery consisted of four 120 mm guns in two twin-gun turrets, one each fore and aft of the superstructure. Anti-aircraft (AA) defense for the Turbine-class ships was provided by a pair of 40 mm AA guns in single mounts amidships and a twin-gun mount for 13.2 mm machine guns. They were equipped with six 533 mm torpedo tubes in two triple mounts amidships. The Turbines could carry 52 mines.

Construction and career
Euro was laid down by Cantieri Navali del Tirreno at their Riva Trigoso shipyard on 24 January 1925, launched on 7 July 1927 and completed on 22 December.