Japanese destroyer Momi (1919)

The Japanese destroyer Momi (樅) was the lead ship of her class of 21 second-class destroyers built for the Imperial Japanese Navy (IJN) during the late 1910s. She was converted into an experimental ship in 1932 and later scrapped.

Design and description
The Momi class was designed with higher speed and better seakeeping than the preceding Enoki-class destroyer second-class destroyers. The ships had an overall length of 280 ft and were 275 ft between perpendiculars. They had a beam of 26 ft, and a mean draft of 8 ft. The Momi-class ships displaced 850 LT at standard load and 1020 LT at deep load. Momi was powered by two Brown-Curtis geared steam turbines, each driving one propeller shaft using steam provided by three Kampon water-tube boilers. The turbines were designed to produce 21500 shp to give the ships a speed of 36 kn. The ships carried a maximum of 275 LT of fuel oil which gave them a range of 3000 nmi at 15 kn. Their crew consisted of 110 officers and crewmen.

The main armament of the Momi-class ships consisted of three 12 cm Type 3 guns in single mounts; one gun forward of the well deck, one between the two funnels, and the last gun atop the aft superstructure. The guns were numbered '1' to '3' from front to rear. The ships carried two above-water twin sets of 533 mm torpedo tubes; one mount was in the well deck between the forward superstructure and the bow gun and the other between the aft funnel and aft superstructure.

Construction and career
Momi, built at the Yokosuka Naval Arsenal, was launched on 10 June 1919 and completed on 27 December. She was stricken from the Navy List on 1 April 1932 and became an experimental hulk at Yokosuka before being broken up at an unknown date.