Lancer 30 Mark V

The Lancer 30 Mark V, also called the Lancer 30 -5, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1980.

The Lancer 30 Mark V is a development of the Lancer 30 Mark IV, which traces its origins to the C&C 30 molds.

Production
The design was built by Lancer Yachts in the United States, between 1980 and 1985, but it is now out of production.

Design
The Lancer 30 Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem; a raised counter, reverse transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 8200 lb and carries 3000 lb of ballast.

The boat has a draft of 5.20 ft with the standard keel.

The boat is fitted with an inboard engine for docking and maneuvering. The fuel tank holds 24 u.s.gal and the fresh water tank also has a capacity of 24 u.s.gal.

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin with a drop leaf table and an aft cabin with a double berth on the port side. The galley is located on the starboard side amidships. The galley is an open "L"-shape and is equipped with a two-burner stove and a double sink. The head is located on the starboard side at the companionway steps.

The design has a hull speed of 6.57 kn.