Mack Anthem

The Mack Anthem is a series of heavy duty (Class 8) trucks built by Mack Trucks. It has a long low-drag hood and fenders. Introduced in 2018, it is designed primarily for highway use.

Design
The Anthem is a long-hood conventional. Designed for highway use, it can have a day cab or two different sleeper compartments. It has aerodynamic aids standards and others are available. Normally a 6x4 (3 axles, 2 powered), there are also 6x2 (3 axles, one powered) models. Total loaded weight can be up to 62,000 lb and 80,000 lb including all trailers.

Advanced electronics are used for engine, chassis, and body controls, as well as maintenance.

In 2019 a new generation Bendix Wingman Fusion was available in the Anthem. It uses radar and cameras to provide emergency braking, lane departure, and blind spot warnings.

Mack builds their own major components (engines, transmissions, axles, and suspensions) and promotes an integrated design. Most vendor components are also available, but engine choice is very limited.

Engines
The Anthem is available with three Mack diesels, the MP7, MP8, and MP8HE. A Cummins Westport ISX12N natural gas engine is also available

The Mack MP7 is the base engine in the Anthem. It is a 659 cuin overhead cam turbocharged inline six-cylinder diesel engine. It develops 325 to 425 hp and 1260 to 1560 lb.ft of torque.

The Mack MP8 engine is a 783 cuin overhead cam turbocharged inline six-cylinder diesel engine. It develops 434 to 505 hp and 1460 to 1760 lb.ft of torque.

The Mack MP8HE engine is a variant of the MP8 with a mechanical drive behind the turbocharger in the exhaust stream. This allows more heat energy to be used for better fuel economy.

The Cummins Westport ISX12N is a 762 cuin overhead cam turbocharged inline six-cylinder natural gas engine. It develops 400 hp and 1450 lb.ft of torque.

Transmissions
All Mack transmissions have aluminum cases and three countershafts. Both Mack and Fuller have manual and automated shifting models. Allison transmissions are available as fully automatic only.

Mack mDRIVE automated manual is the base transmission. It has no clutch pedal and shifts itself on demand. The driver can override it but it is normally driven in "D". It can have 12, 13, or 14-speeds. Other Mack manual transmissions have 8-18 speeds.

Eaton-Fuller UltraShift automated shifting systems are available on all of their transmissions from 9- to 18-speeds.

Allison RDS series 6-speed transmission is available. The RDS is a fully automatic planetary gear transmission with a lock-up torque converter.

Frame
A ladder frame with beam axles is used. There is a single front axle on semi-elliptical leaf springs. The base rear suspension is a Mack tandem with two powered axles, a single rear drive axle with an undriven pusher axle is available. Wheelbases are from 174 to 203 in

A set-back front axle is used. Set back axles, where the hood extends in front of the axle, are used when overall length is not important. They let the fenders and bumper taper back to the tires, allowing less wind drag.

In 2020 Mack introduced the Command Steer system. An additional on-demand electric power steering pump is operated electronically. This allows easier steering, will help dampen steering feedback, steady driving, and can compensate for side-winds, uneven pavement, and braking on different surfaces. A very light feel and automatic return-to-center feature are useful off-road, at slow speed, and in backing.

Dana-Spicer and Meritor supply air brakes, driveshafts, and other components.

Axles
Front axles are available in 12,000 and 14,000 lb ratings from Mack, Dana-Spicer, and Meritor.

Mack powered axles have the drive carrier on top of the housing instead of the front of it like other manufacturers. This lets the driveshafts be in line from the transmission to and between the axles.

Other powered axles are available from Dana-Spicer and Meritor. These have front mounted carriers and in tandemsthe two axle housings are different. The mRIDE tandem has tapered leaves that rock above the bogey pivot then go out and above the axles. Struts go from the bottom of the bogey pivot out and under the axle. They are rated at 40,000 ,.

The Twin Y air suspension has trailing arms that fork to the rear and attach to both the top and bottom of the axle. There is an air bag behind the axle. Each axle is sprung individually. They are rated at 40,000 lb.

A Liftable pusher axle is used in a 6x2 arrangement, where only the rear axle is driven. They are lighter, have less drag, and can be raised when not needed. This allows better fuel economy and longer tire life.

Other tandems with mechanical or air suspensions are available from Mack, Chalmers, and Hendrickson.

Applications
The Anthem is designed as a fuel-efficient highway semi-tractor only.

Regional service is when runs are one day long. Regional tractors usually have a day cab, short wheelbase, and are often used for fleet service. They often can be used with a lower power engines and/or a 6x2 (three axles, rear only driven) arrangement.

Over-the-road is when one or two drivers live in the cab for extended periods. Over-the-road tractors are often owned by their drivers. With sleeper compartments and longer wheelbases they usually need more powerful engines than regional tractors.