Oxygen fluoride

Oxygen fluorides are compounds of elements oxygen and fluorine with the general formula O_{n}F2, where n = 1 to 6. Many different oxygen fluorides are known:


 * Oxygen monofluoride (OF)
 * Oxygen difluoride (OF2)
 * Dioxygen difluoride (O2F2)
 * Trioxygen difluoride or ozone difluoride (O3F2)
 * Tetraoxygen difluoride (O4F2)
 * Pentaoxygen difluoride (O5F2)
 * Hexaoxygen difluoride (O6F2)
 * Dioxygen monofluoride or fluoroperoxyl (O2F)

Oxygen fluorides are strong oxidizing agents with high energy and can release their energy either instantaneously or at a controlled rate. Thus, these compounds attracted much attention as potential fuels in jet propulsion systems.

Oxygen difluoride (OF2)
A common preparative method involves fluorination of sodium hydroxide:
 * 2 F2 + 2 NaOH → OF2 + 2 NaF + H2O

OF2 is a colorless gas at room temperature and a yellow liquid below 128 K. Oxygen difluoride has an irritating odor and is poisonous. It reacts quantitatively with aqueous haloacids to give free halogens:
 * OF2 + 4 HCl → 2 Cl2 + 2 HF + 2 H2O

It can also displace halogens from their salts. It is both an effective fluorinating agent and a strong oxidizing agent. When reacted with unsaturated nitrogen fluorides with electrical discharge, it results in the formation of nitrogen trifluoride, oxide fluorides and other oxides.

Dioxygen difluoride (O2F2)
O2F2 precipitates as a brown solid upon the UV irradiation of a mixture of liquid O2 and F2 at −196 °C. It also only appears to be stable below −160 °C. The general method of preparation of many oxygen fluorides is a gas-phase electric discharge in cold containers including O2F2.


 * O2 + F2 → O2F2 (electric discharge, 183 °C)

It is typically an orange-yellow solid which rapidly decomposes to O2 and F2 close to its normal boiling point of about 216 K.

O2F2 reacts violently with red phosphorus, even at −196 °C. Explosions can also occur if Freon-13 is used to moderate the reaction.

Trioxygen difluoride or ozone difluoride (O3F2)
O3F2 is a viscous, blood-red liquid. It remains liquid at 90 K and so can be differentiated from O2F2 which has a melting point of about 109 K.

Like the other oxygen fluorides, O3F2 is endothermic and decomposes at about 115 K with the evolution of heat, which is given by the following reaction:


 * 2 O3F2 → O2 + 2 O2F2

O3F2 is safer to work with than ozone, and can be evaporated, or thermally decomposed, or exposed to electric sparks, without any explosions. But on contact with organic matter or oxidizable compounds, it can detonate or explode. Thus, the addition of even one drop of ozone difluoride to solid anhydrous ammonia will result in a mild explosion, when they are both at 90 K each.

Fluoroperoxyl
Fluoroperoxyl is a molecule such as O–O–F, whose chemical formula is O2F and is stable only at low temperature. It has been reported to be produced from atomic fluorine and dioxygen.
 * O2 + F → O2F

Effects on ozone
Oxygen- and fluorine-containing radicals like O2F and OF occur in the atmosphere. These along with other halogen radicals have been implicated in the destruction of ozone in the atmosphere. However, the oxygen monofluoride radicals are assumed to not play as big a role in the ozone depletion because free fluorine atoms in the atmosphere are believed to react with methane to produce hydrofluoric acid which precipitates in rain. This decreases the availability of free fluorine atoms for oxygen atoms to react with and destroy ozone molecules.


 * O3 + F → O2 + OF
 * O + OF → O2 + F

Net reaction:
 * O3 + O → 2 O2

Hypergolic propellant
Despite the low solubility of O3F2 in liquid oxygen, it has been shown to be hypergolic with most rocket propellant fuels. The mechanism involves the boiling off oxygen from the solution containing O3F2, making it more reactive to have a spontaneous reaction with the rocket fuel. The degree of reactivity is also dependent on the type of fuel used.