Roller coaster



A roller coaster is a type of amusement ride employing a form of elevated railroad track that carries passengers on a train through tight turns, steep slopes, and other elements usually designed to produce a thrilling experience. Trains consist of open cars connected in a single line, and the rides are often found in theme parks around the world. Roller coasters first appeared in the 17th century, and LaMarcus Adna Thompson obtained one of the first known patents for a roller coaster design in 1885, based on the Switchback Railway which opened a year earlier at Coney Island.

Tracks are typically built and designed as a complete circuit in which trains depart from and return to the same loading station. One variation, a shuttle roller coaster, reverses at some point throughout the course of the ride to traverse the same track backwards.

The Russian Mountains and the Aerial Promenades
The oldest roller coasters are believed to have originated from the so-called "Russian Mountains", specially constructed hills of ice located in the area that is now Saint Petersburg, Russia. Built in the 17th century, the slides were built to a height of between 70 and 80 ft, had a 50-degree drop, and were reinforced by wooden supports. Later, in 1784, Catherine the Great is said to have constructed a sledding hill in the gardens of her palace at Oranienbaum in St. Petersburg.

The Riding Mountain (a.k.a. La Grande Glisade) entertainment pavilion designed by Bartolomeo Francesco Rastrelli for Tsarskoye Selo royal residence was built in 1754–1757. In Russian it was known as Katalnaya gora (Катальная гора, literally "Mountain for riding") It was a huge building in the shape of rotunda. It had a trail with five hills which can be covered with ice in winter. In the summer time the trails used trolleys on wheels secured in the steel grooves mounted on the wooden trails. Due to a pendulum-like motion based on inertia all five hills could be traversed in one ride. The ride was engineered by Russian scientist Andrey Nartov. The Anglican clergyman John Glen King mentioned that some Englishmen visiting Russia called them "Flying Mountains" and described them as follows: You will observe that there are five mounts of unequal height: the first and the highest is full thirty feet perpendicular altitude; the momentum with which they descend this carries them over the second, which is about five or six feet lower, just sufficient to allow for the friction and resistance; and so on to the last, from which they are conveyed by a gentle descent, with nearly same velocity, over a piece of water into a little island. These slides, which are about a furlong and a half in length, are made of wood, that may be used in summer as well as in winter. The process is, two of four persons fit in a little carriage and one stands behind, for more there are in it the greater the swiftness with which it goes; it runs on castors and in grooves to keep it on its right direction, and it descends with a wonderful rapidity. Under the hill, is a machine worked by horses for drawing the carriages back again, with the company in them. Such a work as this would have been enormous in most countries for the labour and expense in cost, as well as the vast quantity of wood used in it. At the same place, there is another artificial mount which goes in a spiral line, and in my opinion, for I have tried it also, is very disagreable; as it seems always leaning on one side, and the person feels in danger of falling out of seat.

Katalnaya gora was dismantled in 1792–1795. Currently in its place is the Granite Terrace in the Catherine Park.

Two roller-coasters were built in France in 1817. Les Montagnes de Belleville (Les Montagnes Russes à Belleville) in Belleville, Paris had wheels attached to carriages and locked on tracks. The Promenades Aériennes, opened in Parc Beaujon in Paris on July 8, 1817 had wheeled cars securely locked to the track, guide rails to keep them on course, and higher speeds. It spawned half a dozen imitators, but their popularity soon declined.

However, during the Belle Epoque they returned to fashion. In 1887, Spanish entrepreneur Joseph Oller, co-founder of the Moulin Rouge music hall, constructed the Montagnes Russes de Belleville, "Russian Mountains of Belleville" with 656 ft of track laid out in a double-eight, later enlarged to four figure-eight-shaped loops.

Scenic railways
In 1827, a mining company in Summit Hill, Pennsylvania constructed the Mauch Chunk Switchback Railway, a downhill gravity railroad used to deliver coal to Mauch Chunk, Pennsylvania – now known as Jim Thorpe. By the 1850s, the "Gravity Road" (as it became known) was selling rides to thrill seekers. Railway companies used similar tracks to provide amusement on days when ridership was low.

Using this idea as a basis, LaMarcus Adna Thompson began work on a gravity Switchback Railway that opened at Coney Island in Brooklyn, New York, in 1884. Passengers climbed to the top of a platform and rode a bench-like car down the 600 ft track up to the top of another tower where the vehicle was switched to a return track and the passengers took the return trip. This track design was soon replaced with an oval complete circuit. In 1885, Phillip Hinkle introduced the first full-circuit coaster with a lift hill, the Gravity Pleasure Road, which became the most popular attraction at Coney Island. Not to be outdone, in 1886 Thompson patented his design of roller coaster that included dark tunnels with painted scenery. "Scenic railways" were soon found in amusement parks across the county.

Popularity, decline, and revival
By 1919, the first underfriction roller coaster had been developed by John Miller. Over the next decade, roller coasters spread to amusement parks around the world and began an era in the industry often referred to as the "Golden Age". One of the most well known from the period is the historical Cyclone that opened at Coney Island in 1927. The onset of the Great Depression in the 1930s, however, significantly impacted the amusement park industry and brought an end to the rapid growth experienced during the Golden Age. This aside, roller coasters were still built with varying success from location to location. In May 1932, the Scene Railway witnessed somewhat of a revival in the UK, including the opening of the roller coaster at Great Yarmouth. Today it is one of only two scenic railways still in operation in the UK.

In 1959, Disneyland introduced a design breakthrough with Matterhorn Bobsleds, the first permanent roller coaster to use a tubular steel track. Designed by Arrow Development, the tubular track was unlike standard rail design on wooden coasters, allowing the track to bend in sharper angles in any direction, leading to the incorporation of loops, corkscrews, and inversion elements into track layouts. A little more than a decade later, the immediate success of The Racer at Kings Island in 1972 sparked a new era of roller coaster enthusiasm, which led to a resurgence across the amusement park industry over the next several decades.

Etymology
There are several explanations for the name roller coaster. It is said to have originated from an early American design where slides or ramps were fitted with rollers over which a sled would coast. This design was abandoned in favor of fitting the wheels to the sled or other vehicles, but the name endured.

Another explanation is that the phrase originated from a ride located in a roller skating rink in Haverhill, Massachusetts in 1887. A toboggan-like sled was raised to the top of a track which consisted of hundreds of rollers. This Roller Toboggan then took off down gently rolling hills to the floor. The inventors of this ride, Stephen E. Jackman and Byron B. Floyd, claim that they were the first to use the term "roller coaster".

The term jet coaster is used for roller coasters in Japan, where such amusement park rides are very popular.

In many languages, the name refers to "Russian mountains". Contrastingly, in Russian, they are called "Американские горки" (Amerikanskiye gorki, "American hills"). In the Scandinavian languages, the roller coaster is referred as "mountain-and-valley railway". German knows the word "Achterbahn", stemming from "Figur-8-Bahn", like Dutch "Achtbaan", relating to the form of the number 8 ("acht" in German and also Dutch).

Mechanics
Roller coaster trains are not typically powered. Most are pulled up a lift hill by a chain or cable and released downhill. The potential energy accumulated by the rise in height is transferred to kinetic energy, which is then converted back into potential energy as the train rises up the next hill. Changes in elevation become smaller throughout the track's course, as some mechanical energy is lost to friction and air drag. A properly-designed, outdoor track will result in a train having enough kinetic energy to complete the entire course under a variety of stressful weather conditions.

Not all coasters feature a lift hill, however. A train may also be set into motion by a launch mechanism such as a flywheel, linear induction motor (LIM), linear synchronous motor (LSM), hydraulic launch, or drive tire. Some launched roller coasters are capable of reaching greater speeds using less track when compared to traditional coasters that rely on a conventional lift hill.

A brake run at the end of the circuit is the most common method of stopping a roller coaster train as it returns to the station. One notable exception is a powered roller coaster, which instead of relying on gravity uses one or more motors to propel the trains along the course.

In 2006, NASA announced that it would build a system using principles similar to those of a roller coaster to help astronauts escape the Ares I launch pad in an emergency, although this has since been scrapped along with the rest of the Ares program.

Safety
Some sources have shown concern over the ability of roller coasters to cause head trauma and serious injury such as the tearing of axons and damaging of blood vessels.

Safety mechanisms and technology
A variety of safety mechanisms protect riders on roller coasters. One of these is the block system. Most large roller coasters have the ability to run two or more trains at once, and the block system prevents these trains from colliding. In this system, the track is divided into two or more sections known as blocks. Only one train is permitted in each block at any given time. There is a section of track at the end of each block where a train can be stopped if necessary, such as preventing dispatch from the station, stopping a lift, or applying brakes. Sensors detect when a train passes so that the system's computer is aware of which blocks are occupied. If a train attempts to enter an occupied block, the stopping mechanisms in all blocks are engaged.

Restraints are another critical aspect to roller coaster safety. Roller coasters usually have two different types: Over-the-shoulder-restraints and lap bar restraints. With both, either hydraulic or mechanical safety mechanisms are used within the restraints. Mechanical restraints use a system known as a ratchet and pawl. When riding a roller coaster with a ratchet and pawl system, the sound of clicks can be heard when pulling down the restraint. Hydraulic restraints use a piston and cylinder. Unlike mechanical restraints, there is no feeling of physical or sound of clicks from the restraint being locked in place. Most modern day roller coasters have sensors that are used to make sure each restraint is locked. If all the restraints are locked, it will send a signal to the ride computer letting it know that it is clear for dispatch. If all restraints are not locked, the train will not be able to move out of the station until each restraint is locked.

Braking systems such as pivoting pawls are used on the bottom of the train and on the inclined lift hill. While the cart goes up the lift hill, it is usually pulled by a chain. The pawl moves over bumps that are separated closely apart. In the event that the train ever becomes disconnected from the chain, the anti roll-back system will engage and it will fall back into the nearest downhill stop preventing the train from falling down the lift hill.

Another key to safety is the programmable logic controller (PLC), an essential component of a roller coaster's computer system. Multiple PLCs work together to detect faults associated with operation and automate decisions to engage various elements (e.g. lift, brakes, etc.). Periodic maintenance and visual inspection by ride engineers are also important to verify that structures and materials are within expected wear tolerances and functioning correctly. Effective operating procedures further enhance safety.

Roller coaster design and statistics
Roller coaster design is another important aspect that requires a working knowledge of basic physics to enhance ride comfort and avoid harmful strain to the rider. Ride designers must carefully analyze the movement a ride subjects its riders to, ensuring it is within a reasonable tolerance. The human body needs sufficient time to react to sudden changes in force in order to control muscle tension and avoid harmful consequences such as whiplash. Designers typically stay in the range of 4–6Gs (40–60 m s−2) as a maximum for positive g-force acceleration, which increases the feeling of weight and pushes riders downward into their seat. For negative g-force, or the feeling of weightlessness, the target is 1.5–2Gs (15–20 m s−2) as a maximum. These fall into a range considered safe to a majority of the population. Lateral acceleration is also typically kept under 2Gs using various techniques including the banking of curves.

Wheels are a critical part in rollercoaster design. The purpose of wheels is to keep the train on the track and to prevent it from flying off. A majority of roller coaster wheels are made from polyurethane. There are 3 kinds of roller coaster wheels which include road wheels, side friction wheels, and up-stop wheels. Road wheels ride on top of the track. Side friction wheels ride on the side of the track to keep the train on the track throughout turns. Up-stop wheels ride below the track and prevent the train from lifting off the track.

Roller coasters are statistically very safe when compared to other activities, but despite all the safety measures in place, accidents still occur. The International Association of Amusement Parks and Attractions (IAAPA) reports that a rider has one chance in 15.5 million of being injured on a ride. Also, "In a typical year, more than 385 million guests enjoyed in excess of 1.7 billion rides at approximately 400 North American fixed-site facilities". IAAPA is required to report annual ride incidents to the National Safety Council.

Types
Roller coasters are divided into two main categories: steel roller coasters and wooden roller coasters. Steel coasters have tubular steel tracks, and compared to wooden coasters, they are typically known for offering a smoother ride and their ability to turn riders upside-down. Wooden coasters have flat steel tracks, and are typically renowned for producing "air time" through the use of negative G-forces when reaching the crest of some hill elements. Newer types of track, such as I-Box and Topper introduced by Rocky Mountain Construction (RMC), improve the ride experience on wooden coasters, lower maintenance costs, and add the ability to invert riders.

A third classification type is often referred to as a hybrid roller coaster, which utilize a mixture of wood and steel elements for the track and structure. Many, for example, have a track made out of steel and a support structure made from wood. RMC has notably redesigned wood coasters that have either deteriorated from age or been deemed by parks as too costly to maintain. RMC often replaces the wood track with their patented steel I-Box track design, while reusing much of the ride's wooden structure, resulting in a smoother ride with the incorporation of new design elements, such as inversions, sharper turns, and steeper drops.

Although the term wasn't widely used or accepted until the 21st century, one of the oldest examples is Cyclone at Luna Park, which opened in 1927. It features a wood track and steel structure. Other older examples include mine train roller coasters, many of which were built by Arrow Dynamics. The term hybrid became more prominent after the introduction of New Texas Giant at Six Flags Over Texas in 2011. Many in the industry, however, continue to classify coasters strictly by their track type only, labeling them either steel or wood.

Modern roller coasters are constantly evolving to provide a variety of different experiences. More focus is being placed on the position of riders in relation to the overall experience. Traditionally, riders sit facing forward, but newer variations such as stand-up and flying models position the rider in different ways to change the experiences. A flying model, for example, is a suspended roller coaster where the riders lie facing forward and down with their chests and feet strapped in. Other ways of enhancing the experience involve removing the floor beneath passengers riding above the track, as featured in floorless roller coasters. New track elements, such as inversions, are often introduced to provide entirely new experiences.

By train type

 * Bobsled roller coaster
 * Dive roller coaster
 * Floorless roller coaster
 * Flying roller coaster
 * Fourth-dimension roller coaster
 * Inverted roller coaster
 * Mine train roller coaster
 * Swinging mine train roller coaster
 * Motorbike roller coaster
 * Mountain/Alpine roller coaster
 * Pipeline roller coaster
 * Side friction roller coaster
 * Spinning roller coaster
 * Stand-up roller coaster
 * Steeplechase roller coaster
 * Suspended roller coaster
 * Virginia Reel roller coaster
 * Water coaster
 * Wing roller coaster
 * Zipline roller coaster
 * Wild Mouse Roller Coaster
 * Infinity Coaster
 * Euro-Fighter

By track layout

 * Boomerang roller coaster
 * Corkscrew roller coaster
 * Dual-tracked roller coaster
 * Figure 8 roller coaster
 * Out and back roller coaster
 * Shuttle roller coaster
 * Terrain roller coaster
 * Twister roller coaster
 * Wild Mouse roller coaster

By mechanics

 * Chain-lift/cable lift/Elevator lift/Ferris Wheel lift roller coaster
 * Launched roller coaster
 * Powered roller coaster
 * Accelerator Coaster

By height
Several height classifications have been used by parks and manufacturers in marketing their roller coasters, as well as enthusiasts within the industry. One classification, the kiddie coaster, is a roller coaster specifically designed for younger riders. Following World War II, parks began pushing for more of them to be built in contrast to the height and age restrictions of standard designs at the time. Companies like Philadelphia Toboggan Company (PTC) developed scaled-down versions of their larger models to accommodate the demand. These typically featured lift hills smaller than 25 ft, and still do today. The rise of kiddie coasters soon led to the development of "junior" models that had lift hills up to 45 ft. A notable example of a junior coaster is the Sea Dragon – the oldest operating roller coaster from PTC's legendary designer John Allen – which opened at Wyandot Lake in 1956 near Powell, Ohio.

Hypercoaster
A hypercoaster, occasionally stylized as hyper coaster, is a type of roller coaster with a height or drop of at least 200 ft. Moonsault Scramble, which debuted at Fuji-Q Highland in 1984, was the first to break this barrier, though the term hypercoaster was first coined by Cedar Point and Arrow Dynamics with the opening of Magnum XL-200 in 1989. Hypercoasters have become one of the most predominant types of roller coasters in the world, now led by manufacturers Bolliger & Mabillard and Intamin.

Giga coaster
A giga coaster is a type of roller coaster with a height or drop of at least 300 ft. The term was coined during a partnership between Cedar Point and Intamin on the construction of Millennium Force. Although Morgan and Bolliger & Mabillard have not used the term giga, both have also produced roller coasters in this class.

Strata coaster
A strata coaster is a type of roller coaster with a height or drop of at least 400 ft. As with the other two height classifications, the term strata was first introduced by Cedar Point with the release of Top Thrill Dragster, a 420 ft roller coaster that opened in 2003. Kingda Ka was the second strata coaster, and it opened at Six Flags Great Adventure in 2005 as the tallest roller coaster in the world with a height of 456 ft. Top Thrill Dragster closed in 2021 following a serious incident, and was subsequently refurbished and modified, reopening in 2024 as Top Thrill 2.

Superman: Escape From Krypton, a 415 ft coaster, opened in 1997 at Six Flags Magic Mountain. It is not typically classified as a strata coaster due to its shuttle coaster design, where trains do not travel a complete circuit.

Exa coaster
An exa coaster is a type of roller coaster with a height or drop of at least 600 ft. The term exa was first introduced by Intamin for Falcon's Flight, a 640 ft coaster expected to open at Six Flags Qiddiya in October 2024. Upon completion, it will be the tallest roller coaster in the world.

Major roller coaster manufacturers

 * Allan Herschell Company (defunct, merged with Chance Rides)
 * Arrow Development (acquired by Huss Trading Corporation, formed into Arrow-Huss)
 * Arrow Dynamics (defunct, assets bought by S&S Arrow)
 * ART Engineering
 * Arrow-Huss (defunct, reformed as Arrow Dynamics)
 * B.A. Schiff & Associates
 * Bolliger & Mabillard
 * Bradley and Kaye (defunct)
 * Chance Morgan
 * Chance Rides
 * Custom Coasters International (defunct)
 * D. H. Morgan Manufacturing (acquired by Michael Chance, formed into Chance Morgan)
 * Dinn Corporation (defunct)
 * Dynamic Structures
 * E&F Miler Industries
 * Fabbri Group
 * Gerstlauer
 * Giovanola (defunct)
 * The Gravity Group
 * Great Coasters International
 * Hopkins Rides
 * Intamin
 * Jinma Rides
 * Mack Rides
 * Maurer AG
 * Martin & Vleminckx
 * Philadelphia Toboggan Coasters
 * Pinfari (defunct)
 * Premier Rides
 * Preston & Barbieri
 * Reverchon Industries (defunct)
 * Ride Engineers Switzerland
 * Rocky Mountain Construction
 * Roller Coaster Corporation of America (defunct)
 * Sansei Technologies
 * S&S - Sansei Technologies (formerly known as S&S Worldwide)
 * SBF Visa Group
 * Schwarzkopf (defunct)
 * TOGO (defunct)
 * Vekoma
 * Zamperla
 * Zierer