Royal National Lifeboat Institution lifeboats

Since its inception, the Royal National Lifeboat Institution (RNLI) has provided lifeboats to lifeboat stations in the United Kingdom and Ireland.

Once past their operation life, the boats have mostly been sold by the RNLI and purchased for domestic use, marine businesses for usage such as further sea lifesaving functions, diving, fishing and pleasure trips or to maritime lifesaving institutions from other countries to continue a lifesaving role. Some lifeboats of particular historic note have been preserved in museums.

History


The Royal National Institution for the Preservation of Life from Shipwreck (RNIPLS) was founded in March 1824. The RNIPLS provided lifeboats to local committees, the Coastguard and harbour authorities. The Duke of Northumberland financed a competition for a standard design of a lifeboat. The winner was William Plenty, of Newbury, Berkshire. These "pulling boats" (rowing) were between 18 and 26 feet in length and were powered by between 4 and 10 oars. They had cork in their hull and shaped air-cases fore and aft. Their double-ended designs could operate a rudder from either end, so there was no need to turn.

The RNIPLS suffered from lack of funds and poor organization. Following the loss of the RNIPLS lifeboat Providence and 20 of her crew of 24 in the mouth of the river Tyne in December 1849, the need for reorganisation was recognised. Algernon Percy, 4th Duke of Northumberland, then First Lord of the Admiralty, took control. Richard Lewis was appointed secretary. The RNIPLS was replaced by the RNLI. Plenty's design was retired and a new design was introduced. These were larger, self-righting boats. They had a narrow beam, were 34 or 35 feet long with higher end-boxes containing the air-cases and were tested to self-right when capsized.

Later lifeboats were increased in length and were optionally powered by sail. Motors were introduced in the early 1900s. They had a greater range, facilitating the merging of lifeboat stations. Innovation in the design of lifeboats is continuous.

In 1962 the need for inshore lifeboats (ILB) was recognised. A French design was adopted, this was an inflatable of 16 foot length and a 40 hp engine with a speed of 20 knots and introduced as the D Class. It was faster than conventional lifeboats, at that time, could traverse shallow waters, go alongside persons in the water without harming them, and the running costs were much less than conventional lifeboats. In 1972 a rigid inflatable boat (RIB) was developed at Atlantic College in South Wales and introduced as the B Class Atlantic 21.

Current lifeboats
The RNLI operated 431 lifeboats in 2022. A number of other craft are also in operation including personal watercraft, boarding boats and Y-class tenders.

The Severn-class are undergoing life extension and the Mersey-class are being replaced by newly-built Shannons.

Pulling and sailing lifeboats
The first lifeboats were powered by oars and most, except a few very early ones, had sails. A few were rebuilt with petrol engines after 1904.

Early powered lifeboats
The RNLI launched its first steam-powered lifeboat in 1889, but by 1905 was experimenting with petrol-engined boats. The first ones were based on pulling and sailing designs and had a single engine but retained sails. Boats with two engines started to appear in 1923 and diesel-engined boats in 1939.

Fast and all-weather lifeboats
The advent of lifeboats with a new hull shape in the 1960s allowed them to exceed 10 kn. They eventually became designated as 'all-weather lifeboats' to differentiate them from the inshore lifeboats that were unable to operate in some storm conditions. The first, the Waveney-class, were adapted from an American design.

Inshore lifeboats
Lifeboats designed for fast response to incidents close to shore. While there have been many designs since the first inshore rescue boats were introduced in 1963, they are divided into five classes:
 * A - rigid-hulled boats
 * B - rigid inflatable boats
 * C - large inflatable boats
 * D - small inflatable boats
 * E - special design for the River Thames

Historic Lifeboat Owners Association
The Historic Lifeboat Owners Association has been set up for individuals who own, maintain, crew or have a general interest in historic lifeboats. The association is a community whereby people can share knowledge, experience, information and advise on the subject, organizes social events and historic lifeboat rallies.

At the beginning of each summer an ex-lifeboat rally is held at Fowey in Cornwall whereby owners bring their boats and display them to the public; this event is organized by Fowey RNLI and is an opportunity to raise funds for the RNLI. Rallies have also been held in Falmouth, Belfast, Glasgow, Poole and Yarmouth, Isle of Wight.