Synairgie Jet Ranger

The Synairgie Jet Ranger is a French homebuilt ultralight aircraft that was designed and produced by Synairgie of Montauban, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

Despite its name the aircraft is not powered by a turbine engine, but by a choice of piston two stroke and four stroke aircraft engines.

Design and development
The aircraft was designed to comply with the Fédération Aéronautique Internationale microlight category, including the category's maximum gross weight of 450 kg.

A development of the Synairgie Sky Ranger, the Jet Ranger features a strut-braced high-wing, a two-seats-in-tandem enclosed cockpit accessed via doors, fixed tricycle landing gearwith wheel pants and a single engine in tractor configuration.

The aircraft is made from bolted-together aluminum tubing, with its flying surfaces covered in Dacron sailcloth. The tubing used is all straight, to simplify fabrication and repairs. Its 9.14 m span wing, is supported by "V"-struts with jury struts, mounts flaps and has a wing area of 13.94 m2. The cabin width is 94 cm. The acceptable power range is 50 to 80 hp and the standard engines used are the 50 hp Rotax 503, 64 hp Rotax 582 two-stroke powerplants or the 80 hp Rotax 912UL four-stroke engine.

The Jet Ranger has a typical empty weight of 185 kg and a gross weight of 450 kg, giving a useful load of 265 kg. With full fuel of 60.5 L the payload for pilot, passenger and baggage is 221 kg.

The standard day, sea level, no wind, take off and landing roll with a 64 hp engine is 100 m.

The manufacturer estimated the construction time from the supplied kit as 100 hours.

Operational history
By 1998 the company reported that 15 kits had been sold and 12 aircraft were completed and flying.