TVR S series

The TVR S series is a line of sports cars manufactured by the British company TVR between 1986 and 1994. It was announced at the 1986 British International Motor Show. The car went into production in less than 12 months, with 150 pre-manufacture orders placed at the motor show before the moulds were even made.

This was Peter Wheeler's first major development since buying the company from Martin Lilley, and the turning point in TVR's fortunes. In total, TVR produced 2,604 S-series cars; 410 of these were the V8S model. The design was the return to a more traditional style, with a strong resemblance to the 1970s M series.

S1/S2/S3(C)/S4C
The V6 S-series cars used Ford's Cologne V6 in 2.8 L, 160 bhp (S1) and 2.9 L (2933cc), 168 bhp (S2–S4) forms. Deliveries of S started in September 1987 and early "S" cars are often referred to as "S1", to distinguish them from later versions.

The S2 was launched in 1988 introducing the 2.9-L engine. The S3 followed in 1989 with longer doors, although some late S2 cars also had these. The S3 also introduced a more traditional design of dashboard with burr walnut veneer.

S1s are becoming increasingly rare with only 78 licensed and 224 SORN.

Model names ending with "c" were used to denote vehicles fitted with a catalytic converter. Only the S3 and S4 were available with catalysts (and the S4 was not built without them). A catalytic converter standard in the UK was introduced in August 1992, at "K" registration; catalysed earlier cars were for export to markets with tighter emissions standards.

V8S
The V8S was launched in 1991 standard specification of the V8S included ½ hide leather interior, walnut trim, mohair hood, OZ alloy wheels, driving lamps, electric windows and door mirrors.

The V8S contains a 4.0 L fuel-injected Rover V8 engine, with gas-flowed cylinder heads, higher lift camshaft, compression ratio upped to 10:5:1, revised manifold, new chip for the engine management system and a limited slip differential. The result is 240 bhp at 5250 rpm and 270 lbft of torque at 3000 rpm.

The V8S has a number of cosmetic differences over the V6. The bonnet has a large hump - created to house the Italian specification supercharger but carried over to all V8S models.



The V8S has a small vent facing the windscreen, whereas S1 to S3 models face forward. Very late S3 and S4 models had no hump at all. As with all TVRs there is no specific point in time when they changed styles; changes were gradually introduced as parts ran out.

The suspension track is slightly wider on the V8S achieved with revised wishbones at the front and revised trailing arms at the rear. Disc brakes are fitted all round.

0-60 mph could be achieved in 4.9 seconds and 0-100 mph in 12.9 seconds. Production ended in 1994

2-litre V8S
The TVR 2-litre V8S was a 2-litre supercharged version of the V8S - this was created for the Italian market in response to their car taxation based on engine capacity. The engine was a modified 3.5 litre Rover V8 fitted with a smaller-throw crank to reduce the engine capacity, retaining the 88.9 mm bore but with a short stroke of 40.25 mm. This meant a displacement of 1998 cc, with a compression rate of 8.0:1. Lucas electronic fuel injection was fitted, along with an intercooled Eaton supercharger. All of this produced 233 PS at 6,200 rpm and 266 Nm at 3,700 rpm. Performance was on par with the bigger V8s, with a top speed of 232 km/h and 0–100 km/h (62 mph) coming up in 6.5 seconds. Ventilated disc brakes were fitted up front, and the 2-litre V8 also got adjustable ride height hydraulic shocks. The TVR Club estimates seven were built, and no more than ten.