Taff Vale Railway A class

The Taff Vale Railway A class was a class of 0-6-2T steam tank locomotives designed by J. Cameron for mixed traffic work and introduced to the Taff Vale Railway (TVR) in 1914. The A class was an enlarged version of the TVR O4 class designed by Tom Hurry Riches in 1907. The A class was the last new class of locomotive to be introduced on the TVR, which had introduced its first 0-6-2Ts in 1885 (the M class); and, with a total of 58 built, was numerically the largest class of tank locomotive on the TVR.

Previous classes of mixed-traffic 0-6-2T on the TVR (the M, M1, N, O, O1, O2, O3 and O4 classes) had used driving wheels of 4 ft or 4 ft diameter; but the A class used the same diameter as the TVR's passenger 0-6-2T (U and U1 classes), i.e. 5 ft, and they were used mainly on passenger trains.

The first 51 locomotives initially had boilers working at a pressure of 160 psi, which (except for no. 120) was later altered to 175 psi; the last seven worked at the higher pressure from new. By the time that the TVR amalgamated with the Great Western Railway (GWR) at the start of 1922, only four (TVR nos. 3, 42, 52 and 120) still worked at the original pressure. All of the A class locomotives were rebuilt with taper boilers and superheaters by the GWR between 1924 and 1932; these also worked at 175 psi at first. The pressure was raised to 200 psi between 1930 and 1939; at the same time, the cylinder bore was reduced from 18+1/2 in to 17+1/2 in. All 58 passed to British Railways (BR) in 1948, until the introduction of the BR 82xxx 2-6-2Ts in the mid-1950s, these engines were widely used on passenger workings in the South Wales Valleys.

After withdrawal, several were employed as Works Pilots in Swindon before being broken up. The first loco withdrawn was 344 in November 1952 from Cardiff Cathays shed. The last seven locos 370, 373, 381, 383, 390, 398 and 402 were withdrawn together in August 1957 from Abercynon shed. None are preserved.

Builders and numbering
The locomotives were built in several batches by Hawthorn Leslie, Nasmyth, Wilson and Company, Vulcan Foundry and North British Locomotive Company. Their initial GWR numbers were in the ranges 335–408 (for locos working at a boiler pressure of 175 psi) and 438–441 (pressure 160 psi), but they were not consecutive and were intermingled with other classes. Those with numbers above 399 were renumbered between 303 and 322 during 1947–50.

Originally, the Taff Vale Railway commissioned the German locomotive factory Hannoversche Maschinenbau AG to build six locomotives in 1914. However, due to the outbreak of the First World War, the deal did not come into being. The order for these six locomotives was transferred to North British and they were delivered as nos. 42 etc. during 1915.