Talk:Air gun spraying

Merge?

 * This may duplicate Paint_spraying. Biscuittin (talk) 19:49, 18 February 2009 (UTC)


 * The info contained can also be found in Airbrush as it contains sections on its uses. I'm going to read before before I add the tag but I will most likely add a tag to merge it into those 2 pages. Ol Yeller  '''Talktome 19:01, 28 February 2009 (UTC)

Breakdown of info for possible merger
I've copied the text from the article and cited where each point can be found in another article (except for one). Ol Yeller '''Talktome 19:24, 28 February 2009 (UTC)

Process Characteristics
"*Uses compressed air


 * Reduces the paint to a fine spray


 * Can be a manual or automatic process


 * Requires skilled operators for manual operation


 * Can achieve a wide variety of spray patterns"

All covered in Airbrush.

Process Schematic
"When air gun spraying is used as a manual process, the air gun is manipulated back and forth over the surface to be coated so that the pattern of each stroke overlaps that of the previous one and forms a continuous coating." Covered by Airbrush.

Workpiece Geometry
"Workpiece geometry is not limited to size." This is covered by the numerous subsections of Airbrush.

"Paint can be applied in various thicknesses on the workpiece." Neither page specifically mentions thicknesses of paint beside how not to make accidental thickness levels in Airbrush.

Setup and Equipment
This is covered completely by Airbrush.

Typical Tools and Geometry Produced
This is covered by Airbrush and Paint_spraying.