Talk:Carbon nanotube/Archive 2

Added to defects
I have added a few lines discussing in brief the effects of defects on the phonon mean free path in carbon nanotubes and the consequences it has for thermal conductivity. Shepplestone 18.45, 30 April 2006 (GMT)

Data on cost and length?
I think it'd be quite nice to have a table or plot showing the record for nanotube length each year, and the cost per kg each year. Something like that would be good for getting a handle on length and cost trends over time. I'm not sure where to find such data, though. --131.215.134.7 09:45, 1 May 2005 (UTC)


 * There are places that sell Carbon Nanotubes: http://www.cnanotech.com/ and http://carbolex.com/

(also see http://home.flash.net/~buckyusa/page16.html)


 * So it should be possible to at least get a good rating on current pricing. This can use this in combination with mentioned prices at certain dates. --65.66.155.44 23:33, 2 October 2005 (UTC)


 * Cost varies an incredible amount depending on the makeup up the sample. The variable aspects can include the amount of amorphous carbon, graphite, SWNT/DWNT/MWNT, the density, etc.. The list goes on. I have seen nanotubes sold for 1$/g and 1000$/g. It really just depends. Hellkyte 11:05, 15 June 2006

Nanotubes vs. fullerenes
The fullerene article says, "They are molecules composed entirely of carbon, taking the form of a hollow sphere, ellipsoid, or tube. Spherical fullerenes are sometimes called buckyballs, while cylindrical fullerenes are called buckytubes or nanotubes."

This article says, "A simple nanotube has a structure similar to a fullerene, but where a fullerene molecule's symmetry is spherical, a nanotube's is cylindrical, with one end typically being capped with half a fullerene molecule."

Which is correct? Are nanotubes fullerenes (and therefore this article needs to be edited), or are nanotubes fullerene-like (in which case the fullerenes article needs to be edited)? I'll see what I can find to back up one version vs. the other. Jon the Geek 15:19, May 3, 2005 (UTC)
 * Any carbon caged structure similar to a bucky ball is referred to as a fullerene. Thus, all nanotubes are fullerenes, as are buckyballs, C70, ect.  (See the article on allotropes of carbon - the table is helpful).  The most well known fullerene, however, is the buckyball, and often people use the term fullerene to refer to a buckyball.  So what they mean is, a nanotube is capped at both ends with half a buckyball.  (This is not always the case, as often one end is metal or open, but that's a bit detailed for here.)  As far as I know, that is not an improper use of the term fullerene, and most people have lived sufficiently well with the double definition of the word fullerene.  Technically, all caged structures are fullerenes.  Colloquially, a fullerene is a buckyball.  You just have to go with it.  —Preceding unsigned comment added by 168.7.248.207 (talk) 21:10, 15 April 2008 (UTC)


 * The problem with a clear definition in this case is that there is a continuous spectrum of theoretically possible "hollow and cage-like" species in between classical spherical fullerenes and nanotubes. You can have progressively more and more elipsoidal structures that eventually are simply capped nanotubes. Where to draw a line differentiating? I believe "fullerene" refers specifically to the spherical, cage-forms. My evidence is:


 * 1. The Oxford English Dictionary defines fullerene as "Any of several forms of carbon consisting of atoms joined together as a hollow structure, as in buckminsterfullerene." (Where buckminsterfullerene refers specifically to the 60-carbon cage molecule.)


 * 2. According to one textbook I have, there are only five experimentally isolated fullerenes: C60 C70 C76 C78 C84 and that all fullerenes have the composition C20+2m (exactly 12 pentagons, but m hexagons). This would suggest that nanotubes are not fullerenes.


 * 3. A review on fullerene aromaticity (Buhl, M.; Hirsch, A.; "Spherical Aromaticity of Fullerenes" Chem. Rev.; (Review); 2001; 101(5); 1153-1184. DOI: 10.1021/cr990332q) states "The fullerenes form a unique class of spherical molecules containing a conjugated pi system. Each fullerene represents a closed network of fused hexagons and pentagons. This building principle is a consequence of the Euler theorem which states that for the closure of each spherical network of n hexagons, 12 pentagons are required, with the exception of n = 1." This strongly indicates that "fullerene" refers only to the spherical objects.


 * 4. The IUPAC is the authority on chemistry nomenclature. They state (refer to |http://goldbook.iupac.org/goldbook/F02547.html this PDF):
 * fullerene
 * "Compounds composed solely of an even number of carbon atoms, which form a cage-like fused-ring polycyclic system with twelve five-membered rings and the rest six-membered rings. The archetypal example is [60]fullerene, where the atoms and bonds delineate a truncated icosahe-dron. The term has been broadened to include any closed cage structure consisting entirely of three-coordinate carbon atoms."
 * Certainly the stricter definition seems to refer only to spherical molecules with an even number of carbon atoms (nanotubes do not fit this strict definition).


 * 5. I'm a chemist, and most of the chemists I know use "fullerene" to mean the small, spherical molecules. When they mean "nanotube" they say "nanotube." When they mean "all those new non-graphite and non-diamond carbon structures" they say "fullerenes and nanotubes" or "carbon nanostructures."


 * There is some ambiguity in that capped nanotubes may end up having the required 12 pentagons on their ends. However, nanotubes typically have aspect ratios that deviate strongly from 1, so I think it is fairly easy to maintain a clear division between nanotubes and fullerenes. Given all this, I believe the concesus in chemistry nomenclature is for fullerenes to refer to spherical cage-like molecules, and nanotubes are thus a distinct allotrope of carbon. I say we update the fullerene artice to reflect this convention. Kebes 22:02, 10 May 2005 (UTC)


 * Sounds good to me. To throw another wrench into the works... carbon nanowires (or maybe just carbon chains; I can't remember what the C=-C=-C=-C (with =- meant to represent a triple bond) chains are called by the guy at the University of Texas who works with them) should probably also be added to references of the allotropes of carbon, and to the nanowire article.

Should we add organizations doing nanotube research to the article? Such as Postdoctoral Positions in Carbon Nanotube Synthesis and Composites at Los Alamos National Laboratory. Or is the "Current progress" section only for "significant" new results?

Smallest Carbon Fullerene?
The mathematics section says that a 20-atom ball is the smallest mathematical fullerene. Has C20 been observed? If not, what is the smallest fullerene in the non-mathematical sense that has been observed? Jon the Geek July 1, 2005 22:57 (UTC)


 * C20 was observed spectrometrically, with identification based on the theoretical prediction of its spectrum.


 * References:


 * Nature 407, 60 - 63 (07 September 2000)
 * hys. Rev. Lett. 87, 035503 (2001)
 * Ed Sanville 22:25, 5 November 2005 (UTC)


 * I have heard that the smallest fullerene is C20 but there is no C22. Can someone show me that there is no C22 (using MATH)?

See Juris Meija. Goldberg Variations Challenge. Anal. Bioanal. Chem. 2006 (385) 6-7 http://www.springer.com/cda/content/document/cda_downloaddocument.pdf?SGWID=0-0-45-275900-0 Juris Meija. Solution to Goldberg Variations Challenge. Anal. Bioanal. Chem. 2006 (386) 4-4 —Preceding unsigned comment added by 192.139.198.197 (talk) 21:55, 16 October 2008 (UTC)

Bond strength
Excuse my ignorance, but since when an sp2 is stronger than an sp3? Don't sp3 orbitals form stronger bonds because of their larger p character? 212.201.44.249 13:48, 28 July 2005 (UTC)


 * In response to above comment; Bond energies in kj/mol (determined by the energy need to break the bond):


 * C-(single)-C 348  sp3
 * C-(double)-C 614  sp2
 * C-(triple)-C 839  sp


 * -signed...the concerned chemist, 8/20/2005


 * In other words, sp2 bonds are weaker than sp3 bonds, but in a double bond there is one of each. Therefore a double bond is stronger than a single bond. Ed Sanville 20:41, 27 December 2005 (UTC)


 * While that may be true, the article currently states that the sp2 bonds in Nanotubes are stronger than the sp3 bonds found in diamond. That is patently false, since the sp3 bonds in diamond are on the order of 1000kJ/mol. I will be changing the article to reference the sp3 bonds in alkanes.

External links and sources
I wish to start the practice of showing when the External link was last updated and by whom. On fast changing technology it is a pain to re-visit a web site that has not changed since visited last. If we can keep update dates noted in this section then it may encourage the External site to stay current and updated. I have taken the liberty to do this to the first External link here. What do others think?

The Nanotube site ( I added this -> "This site last update: 2005.08.05 (Friday) 10:08:05 EDT by David Tomanek." --Bobwinmill 19:22, 12 September 2005 (UTC)


 * Maybe this should be discussed at a higer level, say the Village pump, as this concept could apply to lots of articles. I personally don't like it, as it clutters the page and requires constant update.


 * All information in Wikipedia requires constant update. That is the general idea I hope.  As per clutter, if a link is just an article, that is outdated (say 2 years for Carbon nanotube) then maybe we should just eliminate the link.  If this was a non-dynamic area this would not be a good idea, but here a year is a long time.  Who wants to waste time going to a page with outdated information.  If someone wants a historical perspective on the topic they can go into the history and archives of the topic.  - Bobwinmill 11:53, 17 September 2005 (UTC)

nanotubes in mp3 players
http://www.nantero.com/mission.html says:


 * Possible uses include the enabling of instant-on computers, which boot and reboot instantly, as well as high-density portable memory - MP3 players with 1000s of songs...

Wow nanotubes make the ipod possible!!!


 * The article "Nanotechnology-based data storage on rise" also seems pretty excited about non-volatile nanotube-based memory, and mentions some of the memory types it competes against. So ... how does it work in the lab? Are nanotube-based memory chips sold commercially yet?

nanotubes do not make the ipod possible. --Rmalloy 18:05, 16 October 2006 (UTC)

Question on nanotube diameter
What is the smallest possible diameter of a carbon nanotube? - Student2

According to The Science and Technology of Carbon Nanotubes, the smallest possible diameter is around 0.7nm.

VCUchem 07:48, 24 November 2006 (UTC)

I don't have the paper at hand, but 0.3nm tubes have been observed as the innermost wall of MWNT. 75.119.228.163 (talk) 23:01, 19 April 2009 (UTC)

The interlayer separation in multi-walled carbon nanotubes is 0.34 nm; the smallest diameter carbon nanotube is 0.4nm, see "Single-walled 4 Å carbon nanotube arrays" N. Wang, et al., Nature 408, 50-51 doi:10.1038/35040702 Raywhitby 08:51 November 2009

adhesion of CNT
is there any way to adhesive CNT on another surface, ie, silicon or gold. and is there any way of testing the adhesion strength after placing it on the surface? ....interested student


 * In response to the above, the answer is a resounding 'yes'. The method of adhesion is going to depend on your motive... for example, I recently dispersed nanotubes on TSG (Template Stripped Gold), which was as simple as dissolving nanotubes in chloroform and placing a droplet (a few microlitres) onto the exposed surface. A centrifuge handled the drying, though I believe blow-drying with nitrogen gas might be sufficient.


 * As far as adhesion strength goes, you are unlikely to win any prizes with this method. I can only confirm it produces a bond strong enough to survive AFM in tapping mode. For better adhesion, I would suggest using a different solvent (one which would leave behind a residue), again this may or may not be desirable depending on your motives.


 * Hope this helped, Jamie

In relation to attaching molecules to carbon nanotubes, I read in a paper, (Huaming Li et al, "Functionalization of Single-Walled Carbon Nanotubes with Well Defined Polystyrene Click Coupling", JACS 2005) that during the sidewall chemical modification of cabon nanotubes, in the presence of amyl nitrite as a catalyst, the p-aminophenyl propargyl ether molecule loses the amine and in its place a carbon carbon bond is formed to the SWNT at a sidewall postion. My question is... How does the Isoamyl Nitrite catalyst facilitate the creation carbon-carbon bond at the side wall postion, when it has been much better documented that chemical modification of SWNT's occurs at ends and defect sites? Mechanism perhaps? NanoLlama 17:06, 25 May 2006 (UTC)

graphitic wings
Are these "graphitic wings" worth mentioning in the article? "Flying" nanotubes are strong and hard ARGONNE, Ill. (July 16, 2004)


 * possibly. although it is a bit specific at the moment, as the technology advances i'm sure it will become increasingly important to include this (and many other) branches of nontube studies - mastodon 21:05, 27 March 2006 (UTC)

Health risks and toxicity
The article on Buckyballs says that they can be toxic. Does anyone know if this applies to CNTs as well?


 * Are there any health risks to carbon nanotubes, say like there is for Asbestos? (Small fibrous particles in the air, etc.?) zoney &#09827; talk 09:46, 2 March 2006 (UTC)


 * The simplest way to answer your question is we don't know. Thats the answer given on Sigma-Aldrich's safety data sheet anyway. Nanotubes are very unreactive so there probably is very little toxic hazards but there may be mechanical risks with them. The best way to treat them is as a hazardous material until we know better. Afn 12:44, 2 March 2006 (UTC)

since the human body does not have a means(enzyme) do break down carbon naotudes they may be just as toxic as asbestos--taucetiman


 * There should be a piece in the article mentioning the concerns over health risks at the very least. zoney &#09827; talk 11:15, 6 March 2006 (UTC)

One major concern is the similarity to asbestos. Although there is not a concensus on this at the moment, I have read a couple of papers from asbestos experts that say that the comparison is invalid. The danger of asbestos exists because of its "spear-like" structure. Nanotubes, on the other hand, usually exist in a knotted balls of ropes. There was also a study done where tubes were forcibly injected into the airways of mice, there were fast CNS responses, which quickly dissipated. The conclusion was that this was not do to the CNTs, but due too poor methodoloy. This study also illuminated the fact that CNTs are not really respirable, hence the forcible injection.

There are a couple situations where they know that CNTs can be toxic. It is more appropriate to say that the residual catalyst is toxic (Nickel). Nonetheless, I believe that CNTs should be treated as toxic until further study is done. Hellkyte


 * This would be dangerous, you cannot claim that a material is toxic simply due to its catalyst as different techniques use different catalysts. CNTs are so far shown to have had some effect on the respiratory systems of fish, but the relative effect on humans has not been shown.
 * Ref: E. Oberdorster, S.  Q.  Zhu, T. M. Blickley,  P.   McClellan-Green  and  M.   L.  Haasch,  (Ecotoxicology  of
 * carbon-based  engineered  nanoparticles:  Effects   of  fullerene
 * (C{$_{60}$) on  aquatic  organisms,  Carbon 44,  1112  (2006)


 * However, the field of research is still relatively young. There have also been experiments which have shown that CNT's have positive effects upon insertion into biological organisms
 * Ref: ICN+T 2006 Abstract Booklet. Iop Conference Series


 * As such, the tubes cannot be considered as toxic at the moment. This is not to say that they are 100% safe, but to brand them toxic would be a mistake.


 * Shepplestone 16:30, 8 August 2006 (BST)

I should have specified that nanotubes created using the Nickel catalyst method would be toxic due to residual catalyst. Anyways, I find it disturbing that you treat this material with an innocent until proven guilty attitude. If you don't know for sure, and we don't, treat it as dangerous. Of course the only people this will matter to are people working in production, as anyone outside of production will only see it imbedded into a plastic (for the most part) or carefully treated and used as a pharmaceutical. If I am not mistaken, the pharmaceutical uses only apply if the nanotubes are functionalized. Without the functionalization they are considered cytotoxic. - Hellkyte

I think everyone should just calm down. The answer to your question is 1) we don't know what if any toxicity they pose 2) they are under study, but nothing that has been done is conclusive, and many studies are contradictory 3) and for those of you really worried, if they were highly toxic, I would now be dead.


 * Toxicity isn't something that is always seen overnight. The health risks asbestos caused took decades to manifest in some people. The industry of CNT development simply hasn't been around long enough to throw that possibility out. Moreover, different CNTs may behave differently. HiPco SWNTS are massively different from MWCNTs in many things therefore while one type of tube may be toxic another may not. Even the degree of entaglement will matter. This is one of those things that I doubt many of the medical studies take into account, many scientific papers about CNTs don't appreciate how massive the difference can be. -Hellkyte —Preceding unsigned comment added by 146.7.123.51 (talk) 15:41, 21 May 2008 (UTC)

Progress cleanup
this section is confusing. it would be much better suited as a ==history== section, from initial conception, to first sythesis, and all the significant progressions from then to the present. as of now, it is just a jumble of dates, with only chronolgical order, no metion of significance whatsoever. i think this technology has masive promise, and will therefore find itself on the front page, as it enters public conciousness. but it won't do that without a clear, consise and thougough breakdown of the material's history. perhaps it should be split into a second article (timeline of...). having said this i am no expert, having not studied them in chemistry yet. call in an expert editor! mastodon 13:45, 26 March 2006 (UTC)

63 GPa tensile strength
Both this article and Space elevator state that the maximum measured tensile strength for SWCNTs is 63 GPa. In both cases it is inproperly referenced. This article gives a google link searching for nanotubes "tensile strength" "63 GPa", the Space elevator article states that the experiment was performed in 2000 but only gives a dead link as a reference. However judging by the URL, it's likely that the paper was one of the two relevant papers published by a team including Rodney S. Ruolff in 2000 (the first author of both was Min-Feng Yu). One was [http://link.aps.org/abstract/PRL/v84/p5552 Phys. Rev. Lett. 84, 5552–5555 (2000)], and reported a tensile strength of 13-52 GPa for SWCNTs. The other was [http://sciencemag.org/cgi/content/abstract/287/5453/637 Science 28 January 2000: Vol. 287. no. 5453, pp. 637 - 640], which reported a tensile strength of 11-63 GPa for MWCNTs, not SWCNTs. The source of Wikipedia's confusion may well be the report published by the Institute of Space Research titled The Space Elevator, which states :


 * The second paper that is of interest appeared in Science in January [Yu, 2000a] with a follow-up of additional measurements appearing in Physical Review Letters in June [Yu, 2000b]. In these papers, Yu presents some of the first measured tensile strengths of nanotubes. Yu and colleagues appear to have done a thorough and well thought out experiment and got impressive results. Tensile strengths of 11 to 63 GPa were measured for individual nanotubes compared to Yu's references of theoretical tensile strengths of 300 GPa. (We used 130 GPa, Yakobson and Smalley, 1997, in all of our calculations.)

Individual nanotubes indeed, but individual multi-walled nanotubes, not individual single-walled nanotubes.

I'll be amending both articles shortly unless someone can tell me about some other experiment performed in 2000 which did in fact report a strength for SWCNTs of 63 GPa. -- Tim Starling 05:41, 3 April 2006 (UTC)

Min-Feng Yu studied SWCNT as well [http://prl.aps.org/abstract/PRL/v84/i24/p5552_1 Phys. Rev. Lett. 84, 5552–5555 (2000)] with a tensile strength of 30 GPa. — Preceding unsigned comment added by Shinji311 (talk • contribs) 10:57, 13 July 2011 (UTC)

Carbon nanotube tori
The article lists nanotori, and says such a structure "...has good properties". What does this mean? Good properties for what? (Carbon nanotori are, by the way, well documented and investigated, the question is which of their properties are "good", and for what.) Nahaj 14:41, 21 May 2006 (UTC)
 * It now appears someone deleted the entire section on Carbon nanotori, citing the "good properties" comment.  Since they are a legitimate form, I've put the section back (without the silly comment about "good properties").  I added a comment about one specific property that they have (from the many in the literature), so section doesn't look totally empty. Nahaj 20:28, 21 May 2006 (UTC)

There are some very upset mathematicians about the hijacking of the term "toriod". Evidently these things are not really torus'. I don't particularly care, but thought I'd put that out there. —Preceding unsigned comment added by 168.7.248.207 (talk) 21:20, 15 April 2008 (UTC)

Additional info on MWNTs?
I noticed there's a good amount of detail on SWNTs, yet MWNTs are dismissed with a few lines. Down in the article, it is stated MWNTs could be used because of their higher elasticity, allowing the fibers to translate one inside the other. Are there other applications?

Another things which I would like to know is the use of nanotubes for generators. It is stated that electrical motors can be greatly improved by nanotube technology. Since generators are "somewhat" similar, I would like to know if there have been experiments on nanotube-enhanced electrical generators.

Thank you!  MaxDZ8 talk  07:45, 30 May 2006 (UTC)

One of the only things I can say from experience is that MWNTs are a LOT easier to grow. Hellkyte

Applications
Question: How are carbon nanotubes used as field emitters in electron beam sources?

The applications section is atrociously made. There exists a lack of capitalisation and a good description on why they are appropriate for this role. AllStarZ 20:34, 30 May 2006 (UTC)

The following statement under the application line should DEFINITELY be sourced, because this is a HUGE claim.
 * Carbon nanotubes have also recently been discovered to be a component of damascus steel (ancient swords made from it were reported to have been able to cut through stone and metal without losing their edge, and could still cut silk scarves in mid-air).

-Hellkyte


 * There is a source given in the Damascus steel article: Sharpest cut from nanotube sword. However, the Damascus steel article says that the claims about cutting through stone and steel are apocryphal. Itub 01:41, 16 January 2007 (UTC)

There was a science or nature article about it. . . can't remember where —Preceding unsigned comment added by 168.7.248.207 (talk) 21:21, 15 April 2008 (UTC)

1993 Discovery of single-wall carbon nanotubes
Added to nanotube timeline: ft 1993
 * Groups led by Donald S. Bethune at IBM and Sumio Iijima at NEC independently discover single-wall carbon nanotubes and methods to produce them using transition-metal catalysts.

Discussion: These discoveries [1,2] at IBM and NEC marked a significant turning point in carbon nanotube research, since the catalytic routes found for the specific production of single-wall nanotubes led to an explosion of research on them. In 2002 the American Physical Society awarded Bethune and Iijima the The James C. McGroddy Prize for New Materials "For the discovery and development of single-wall carbon nanotubes, which can behave like metals or semiconductors, can conduct electricity better than copper, can transmit heat better than diamond, and rank among the strongest materials known." and in 2004 the American Carbon Society Medal  was awarded to Bethune, Iijima and Prof. Moribundo Endo (Shinshu University) for "outstanding contributions to the discovery of, and early synthesis work on, carbon nanotubes". Dsbethune 23:20, 30 June 2006 (UTC) [1] D.S. Bethune, et al., Nature 363, 605-607 (1993). [2] S. Iijima and T. Ichihashi, Nature 363, 603-605 (1993).

--

The discovery of nanotubes is still a debatable subject and to maintain neutrality Wikipedia should not state who is responsible for their discovery at the present moment. An excellent review is provided in Carbon 44, 1621 which shows claims dating as early as 1952. The importance of Iijima's report may not be the discovery so to speak, but it was the report which brought carbon nanotubes to the attention of the scientific community as whole.

Shepplestone 14:25 17 January 2006 (GMT)

Synthesis
I expanded the synthesis section a bit. I felt it deserved some more attention. If I have paid too much attention to CVD it is only because I know the most about that particular method. If anyone would like to change my references to DOI links that would be great.

--147.226.171.199 20:07, 13 July 2006 (UTC)


 * Awesome! Thanks, whoever you are. —Keenan Pepper 20:19, 13 July 2006 (UTC)

Ballistic conduction
Ballistic conduction is listed as a thermal property, but the link points to an article describing it as electrical.--128.154.44.44 14:22, 19 July 2006 (UTC)

The term Ballistic conduction is correct, but the link is incorrect, I am searching for an appropriate link at the moment. User:Shepplestone:Shepplestone 16.28 8 August (BST)

Nanotubes in flames?
This article currently says, "Fullerenes and carbon nanotubes are not necessarily products of high-tech laboratories; they are commonly formed in such mundane places as candle flames." Is it true that nanotubes can be found in candle flames? After a fair amount of searching, I have found references saying that buckyballs are found in candle flames, but nothing about nanotubes. Can someone provide a reference? If not, perhaps this statement should be deleted. —The preceding unsigned comment was added by 134.76.218.117 (talk • contribs).


 * I added four references that say they're all over the place. I'm convinced they're produced in candle flames, but none of the references specifically mention candles, so that would be OR. Hmm, now I think I'll work on Soot... —Keenan Pepper 08:08, 17 August 2006 (UTC)

Nanotubes likely cannot be formed from a candle flame since nanotubes are destroyed at around 500 C in the presence of oxygen.

superconducting nanotubes
Does anybody have a reference for the alleged superconductivity of carbon nanotubes? I am aware of experiments with superconducting leads and claimed intrinsic superconductivity. As far as I know however it is still controversial whether carbon nanotubes by themselves are superconducting. -- Bamse 09:38, 6 September 2006 (UTC)

GA Review

 * GA review (see here for criteria)


 * 1) It is reasonably well written.
 * a (prose): b (MoS):
 * 1) It is factually accurate and verifiable.
 * a (references): b (citations to reliable sources):  c (OR):
 * 1) It is broad in its coverage.
 * a (major aspects): b (focused):
 * 1) It follows the neutral point of view policy.
 * a (fair representation): b (all significant views):
 * 1) It is stable.
 * 2) It contains images, where possible, to illustrate the topic.
 * a (tagged and captioned): b lack of images (does not in itself exclude GA):  c (non-free images have fair use rationales):
 * 1) Overall:
 * a Pass/Fail:
 * The article are overusing abbrevations, see Manual of Style
 * Removed a lot of the abbreviations Snailwalker | talk 11:06, 21 October 2006 (UTC)
 * Removed a lot of the abbreviations Snailwalker | talk 11:06, 21 October 2006 (UTC)


 * The section "Types::Single-walled" have some Harvard citations, but the rest of the article have Chicago types. Also it mixes up air and oxygen. It lacks reason why for example n=0 results in zig-zag etc.
 * I don't see how it lacks reasons for n=0 results in zig-zag, it's just a definition that they're called zig-zag, because they kind of look like zig-zag, one can also see it on the image Snailwalker | talk 10:56, 21 October 2006 (UTC)


 * In the section "Discovery", it says that it have a one-dimensional structure, but no where in the article it specifies this one dimensional structure, and all images shows a three dimensional structure, it's really confusing.
 * Removed as there was no reference and as far as I know CNT's are three-dimensional structures Snailwalker | talk 11:06, 21 October 2006 (UTC)


 * The section "History" should be removed and be replaced by a see also link.
 * Wording like "Perhaps the best hope" is a violation of NPOV
 * Section "Potential Applications::In electrical circuits" lacks references.

This I feel is too much to be fixed in one week, so I'll fail the nomination. → A z a  Toth 16:25, 16 October 2006 (UTC)


 * Okay thanks for the review, I'll look into it and probably nominate it again some other time! Snailwalker | talk 08:34, 17 October 2006 (UTC)

Synthesis
Can they really make these in an anus, or is this the work of a vandal? I do like the title Analtubes for Tomorrow though. —The preceding unsigned comment was added by 66.73.14.2 (talk) 16:39, 8 December 2006 (UTC).

it was vandalism and i removed the edit. a friend of mine did it as an experiment in seeing how long it takes for errors to be fixed in wikipedia. it was a stupid thing to do and now i'm going around and finding his edits and reverting them. some people just don't appreciate wikipedia. Bdean42 16:51, 8 December 2006 (UTC)

Mislabelled, misplaced Illustration?
The illustration with the caption "The joining of two carbon nanotubes with different electrical properties to form a diode has been proposed" highlights an instance of a heptagonal formation of carbons with a pentagonal, which was mentioned earlier in the article as a category of defect in nanotubes. If the method of joining nanotubes with different electrical properties, requires exploiting this defect ("bugs as features?") then the caption should be reworded; but I suspect it's just mislabelled and misplaced. Peter H. St.John, M.S. 20:44, 8 December 2006 (UTC)

"In electric circuits" - completely outdated
This section is outdated to such a degree that it would basically have to be rewritten from scratch. It is based on the state of the field in 2000 and quite a lot has happened since then. In 2001 the first nanotube transistors operating at room temperature was made. The same year, IBM demonstrated a circuit with 1000 nanotube transistors. In 2003 a single-chip waver with ten billion nanotube transistors was created. In 2004 researchers at UCLA created a working integrated memory circuit based on nanotubes - that also demonstrated a fully automated method of removing failed nanotubes.. etc

The things above are just a few things that I saw listed in Ray Kurtzweil's 2004 book "The singularity is near". Given the exponential development of these things, it is safely to assume that between 2004 and now there have been as many breakthroughs as between 2000 and 2004.

I'm reluctant to write anything about it as I know very little of the field - it would be good though if we could get somebody to update the text to reflect the developments since 2000. --Denoir 19:16, 27 December 2006 (UTC)
 * I would second that. Ergzay 20:30, 21 January 2007 (UTC)


 * Well, you should see what the text looked like before - I updated it to 2004 standards. I'm sure however a lot has happened since 2004, exponential progress and all. --Denoir 22:00, 21 January 2007 (UTC)

It's also inaccurate. Logic gates do not require both a p-FET and n-FET type device. In fact, one of the avenues being pursued to create logic circuits is to create n-FET only logic. —Preceding unsigned comment added by 151.190.254.108 (talk) 17:17, 15 September 2009 (UTC)