Talk:Carneddau

Moved this article from "Carnedd" to "Carneddau". I have never heard "Carnedd" used for the range. Rhion 08:15, 21 September 2005 (UTC)
 * I've heard 'Carneds' (with a 'd' rather than a soft 'th' sound) used by non-Welsh speakers but would baulk at using that pronunciation myself! Geopersona (talk) 05:07, 21 January 2009 (UTC)

Odd that the convert function is giving 910m for 3000ft whereas it should be 914m Geopersona (talk) 05:07, 21 January 2009 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified 1 one external link on Carneddau. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20130615232325/http://www.thesnowdonian.com:80/regions/carneddau to http://www.thesnowdonian.com/regions/carneddau
 * Added tag to http://www.walkeryri.org.uk/wordpress/?cat=8

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at ).

Cheers.— InternetArchiveBot  (Report bug) 22:09, 15 November 2016 (UTC)

Conversion Precision
The area is described as extensive high ground over 2000 ft, 2500 ft and 3000 ft. Metric conversions have been added. Template:convert naturally rounds figures to match the input so 3000 ft is displayed as, '3000 ft' instead of the more accurate figure 3000. ft. This was fixed by adding a precision parameter as 3000 ft. Unfortunately the original figures are rough. That is, "High ground above about 3000 ft" rather than "High ground over 3002 ft 7 inches". So the metric figured should also be rough figures. Roughly 3000 ft is roughly 910 m or even roughly 900 m. Roughly 914 m 40 cm does not make sense. A good rule of thumb is that Ordnance Survey used 50 foot contours on their 1 inch series and now use 10 metre contours on the 1:50000 series so rounding heights of areas to 10 m makes sense.

However actual heights of features should always be converted with true precision. Infobox Mountain has parameters height_m and prominence_m that automatically convert metric height to imperial. This can be embarrassing if the precise height of a mountain is 1000 m. To avoid any rounding, you can add a decimal point so that the height is 1000. m. Don't add a prosthetic zero as otherwise you will get 1000.0 m. OrewaTel (talk) 19:43, 12 November 2023 (UTC)