Talk:Cymbal

Layout changes
The layout of this article could use some attention. As more information gets added, it will be easier to create specific sections, but for now I think it could use a little more organization. A list of cymbal types should be created (looks like it has been started under the 'cymbal parts' section. I'll start working on some of this.  Any other ideas?  --Ivan Gierland 19:23, 1 July 2009 (UTC)

Removed Text
Removed text: ''One of the world's largest manufacturers of cymbals is Paiste. Other cymbal manufacturers include Saluda, Zildjian and Sabian.'' Why single Paiste out? They make some great cymbals, I have a Paiste ride, crash/ride and trad splash in my 'ultimate' set, but they're one among several. The best are a matter of taste, the biggest AFAIK is a factory whose name I can neither pronounce nor spell in Wuhan, China (one of many cymbal factories in that city). Andrewa 02:14, 25 Feb 2005 (UTC)

Gong/Cymbal Difference
I am trying to define the difference between a gong and a cymbal but I'm getting nowhere. They seem to me, in their various forms to share all characteristics. Is it convention that determines that A is a Cymbal but B is a Gong where both A and B are 15 inch bronze disks or is it something else? Grant Petersen 05:47, 30 August 2006 (UTC)


 * Simply gong is thicker than cymbal. There are gongs which their size are similar than cymbals, however, usually gongs are bigger than cymbals. We use a large and hard mallet to play the gong.(Addaick 06:41, 17 July 2007 (UTC))


 * Disagree with that completely! They are different instruments, or really families of instruments, and I'm not even sure there's any overlap. Some cymbals, particularly big thin ones with lots of taper and chinas, can be played to produce a very gong-like sound, and some gongs, especially wind gongs, can produce a very cymbal-like sound, but that doesn't mean they're the same instrument... A glockenspiel can be played to sound like a celesta, and an electric guitar to sound like an oboe, but they are also different instruments.


 * A cymbal is mounted by its centre, a gong by its rim. That's probably the most obvious difference. The biggest gongs are much, much bigger then the biggest cymbals simply because it's possible to manufacture and play a much bigger gong than you can a cymbal, and that's because of the mounting. The smallest cymbals and the smallest gongs are both about 6" in diameter unless you count zills or crotales as types of cymbal (some do, some don't), if so then the smallest cymbals are smaller than the smallest gongs, and again it's just because a gong that small would be impossible to play, as would most types of cymbal.


 * There are thick and thin gongs, and thick and thin cymbals. Large gongs tend to be played with large beaters, but not always... Mikrophonie uses an enormous gong and an enormous variety of beaters and nearly all of the beaters are smallish.


 * Both gongs and cymbals of all sizes can be played with either hard or soft sticks if played properly. Andrewa (talk) 09:56, 11 January 2012 (UTC)

Fixed Damage
I've tried to fix the damage done to this page... it would be best to watch it for a little bit to see if the vandal comes back. (May 2 2009) —Preceding unsigned comment added by 67.191.163.194 (talk) 01:39, 3 May 2009 (UTC)

history
needs history... who made the first cymbals? how long ago, etc. etc. --24.21.133.196 (talk) 03:20, 27 June 2010 (UTC)

Cymbal Manufacturers
Anonymus IP's are continuously deleting several small cymbal manufacturers, the fact that they don't know them is of 0 relevance to an encyclopedic article, that companies exist and produce cymbals, which is a fact, my username is OZPerpetue, but my office inserts keyloggers so I am going to sign with my IP --201.171.177.93 (talk) 07:21, 4 August 2010 (UTC)

Ceramics
At various places in his Autobiography, Berlioz laments that he could only get ceramic cymbals, and further that these were often cracked or chipped. From which, the Italian piatti, or plates. It does seem to me that a pair of ordinary dinner plates, with holes drilled in the centers for handles, would in fact function as cymbals, after a fashion. Their noise would be similar, yet different to "modern" cymbals, which are, if memory serves, of Turkish origin. (With the triangle, "Turkish music.") Which is what Berlioz expressly wished to have, though it seems rarely got.

Turkish cymbals differ from plates in that they are made of wound wire, hence their "springiness". Which reminds me of the main deck guns of the early English Dreadnoughts. The barrels were made of wound wire. When they were fired they tended to whip from side to side a tiny bit.

As it's been asked, gongs are entirely different. They are similar to bells, in that they are made of resonant alloys (as are bells), rather than wound wire. Dave of Maryland (talk) 01:48, 6 February 2011 (UTC)

I think you might be mistaken. Please see the note below in the "Wound Wire" section. DouglasHeld (talk) 12:20, 27 September 2015 (UTC)

Crash Cymbals vs. Crash Cymbals
I think the terms crash cymbal(I think this is a drum set part) and clash cymbal(I think this is one of a pair used in orchestral or band music) are switched in this article.

I don't know how to delete this section, but I'm trying to. Either it's been fixed or I'm thinking of a different page.

Wire Wound Cymbals
There is no mention of wire wound cymbals in this article or in "cymbal manufacture." There are a significant number in use (in my experience - 60 years.) Perhaps they are too costly to make perhaps because they do not lend themselves to machine manufacture or perhaps they break too easily - they are easily noticed to be wire wound when very broken because they consist of 2 previously concentric pieces connected by a wire of squarish section. If slightly broken there is a crack that is semi-circular and concentric. Perhaps their sound has fallen out of favor. I assume that historically they were among the earliest because they would be the easiest (though labor intensive) to manufacture with primitive technology.

They are mentioned on this talk page under the subject "Ceramic ....." I don't feel qualified to add to the article but feel that their insertion is relevant and important under this article or "Cymbal Manufacture" article. Ecstatist (talk) 06:15, 14 September 2015 (UTC)

I really don't think there are cymbals made of wound wire. Instead, I think the cymbals are etched with "aural grooves". I came here looking for aural grooves and didn't find anything... Have a look here for a video of Turkish cymbal manufacture. https://www.youtube.com/watch?v=SK8XHULfllo DouglasHeld (talk) 12:18, 27 September 2015 (UTC)

Page cleanup
a) Kindly lead with the article name. If this belongs at cymbals, move the page there first.

b) We only need one See also section.

c) This article can have a section on cymbal manufacturers if that section is an overview and not just a straight list wasting page space that a link to cymbal manufacturers more than covers. The section on manufacturers should be worked into a section on manufacturing and doesn't go under the See also section. — Llywelyn II   12:25, 19 May 2016 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Cymbal. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20081220225131/http://www.cymbalforum.com/ to http://www.cymbalforum.com/

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 02:37, 16 August 2017 (UTC)

Hammerax up for deletion again
Serial WP:AFD. Question of WP:Notability and WP:Before. Sources need improvement. 7&amp;6=thirteen (☎) 19:35, 19 November 2019 (UTC)
 * Second nomination
 * Second nomination