Talk:Humidity/Archive 1

This article need update as soon as possible
Agreeing with the statements below: the absolute humidity definition is unclear. Dec. 3 2014 — Preceding unsigned comment added by 156.111.111.120 (talk) 14:56, 3 December 2014 (UTC)

I agree with Holyone2, what is p and p* here? Any letters you used in equation need very clear defination! Also why you have Mw and Mv in same article represent same thing? (in your text those seem to be same, the mass of water vapor). Please update this article as soon as possible, it is not good in this stage. (most people think WikipediA has good quality articles.)

--Professor2013 (talk) 00:58, 5 April 2013 (UTC)

The equation letters need defining explicitly in the text
What do p and p* refer to the equations? Pressure? Partial molar concentration? Density? etc.

--Holyone2 (talk) 21:49, 4 March 2013 (UTC)

Ground-level humidity vs. cloud-level humidity
I think the idea that if it's raining it's automatically 100% humid is wrong, because rain only means that where the water is condensing (in the clouds hundreds of feet above the ground) it is 100% humid. But at the ground level, unless there's dew or fog, it is less than 100% humid. Please tell me how that is wrong. Thanks... Br77rino (talk) 22:11, 15 July 2012 (UTC)

= Non-water definitio WTF WTF

Definition of specific humidity is wrong. It is ratio of the mass of water vapor to the total mass of the system (moist air). You can find definition, for example, in Ahren's textbook Meteorology Today, Whiteman's Mountain Meteorology and at AMS Glossary website. What you defined is called mixing ratio. Please correct this. — Preceding unsigned comment added by 140.196.24.2 (talk) 16:12, 9 November 2011 (UTC)

Wrong definition of Specific humidity??
I think that specific humidity is the ratio of the mass of water vapor to the mass of MOIST air. This article has it as the ratio of mass of water vapor to mass of dry air. Moist air is the total mass (dry air + water vapor) and dry air is the air without the water vapor...so it makes a difference. I just noticed it. If I'm right, how can it be changed? (sorry if I'm not signing correctly.)jack 17:51, 22 February 2008 (UTC)

This is incorrect. What you are referring to is the water content, which is the ratio of mass of water vapour to the total mass (air and vapour). The specific humidity is the ratio of mass of water vapour to mass of dry air in a given volume. 132.244.246.25 (talk) 07:48, 9 September 2008 (UTC)Rob


 * What Jack says is consistent with the definition of specific humidity at a NOAA website http://www.arl.noaa.gov/faq_c1.php The definitions of specific humidity and mixing ratio at the NOAA webpage are just the opposite of the ones given here. --Roland 11:49, 25 February 2012 (UTC)


 * The definition of the specific humidity used in this article is plainly wrong. As mentioned by Jack, it is the ratio of the mass of water vapor to the mass of moist air, i.e. the specific humidity is a mass fraction (see http://glossary.ametsoc.org/wiki/Specific_humidity). This means that the specific humidity is given by q = ρwv/ρ, where ρwv is the partial density of water vapor, and ρ is the density of moist air.


 * Also the definition of the mass mixing ratio of water vapor is plainly wrong because it is the ratio of the mass of water vapor to the mass of dry air. In the Glossary of the AMS (http://glossary.ametsoc.org/wiki/Mixing_ratio) is correctly stated:


 * The ratio of the mass of a variable atmospheric constituent to the mass of dry air.


 * This means that the mass mixing ratio of water vapor is given by rwv = ρwv/ρd, where ρd is the density of dry air. Obviously, the statement


 * For many purposes, the mixing ratio may be approximated by the specific humidity


 * was misinterpreted. Only if rwv << 1, q and rwv may be considered as nearly identical. Gerhard kramm (talk) 19:55, 26 July 2013 (UTC)


 * Since Rob hasn't cited anything to support his interpretation, isn't it time to edit the article? Glueball (talk) 05:14, 3 March 2017 (UTC) Ok I've just done it. Glueball (talk) 05:22, 3 March 2017 (UTC)

does this graph help ??
HTTP://en.wikipedia.org/wiki/Image:Abs_humidity#file

please note that it may be erroneous, it is based upon formula by Sontag/Weller, although my application could be incorrect, however I have checked it and to me it appears correct, any confirmation would be gratefully received though :) Teeteetee 21:00, 8 August 2006 (UTC)

It looks erroneous to me; maybe it would be correct if the y-axis were grams per kg? It is an extremely helpful graph. I'm not an expert, could somebody who is check it and restore it if it is correct? Or correct and restore it? (I removed it as a precaution only)Artmario2001 (talk) 22:51, 2 July 2008 (UTC)


 * The above linked graph was not on the page, the one you removed did have g/kg. I've replaced it. Vsmith (talk) 01:48, 3 July 2008 (UTC)

thank you looking up me from i can tell you anything

humidity and density
A few changes here - liquid water is heavier than air yes, but is it more dense? as a liquid yes, but not so simple any more. Also, cleaned up some of the writing, we don't need to take the author on a story about the cubic metre of gas, after all, if we have a fixed volume of a cubic metre, and flow in and out of it, you can in fact have more molecules than you previously had in that volume (maybe for a short time more molecules collide and bump each other into that box, than in the previous timeframe). Anyway, doesn't matter, as the point is, water vapour is lighter than N2 and O2, the whole cubic metre thing and the flow doesn't really help the explanation imho. --Phatmattbaker 13:43, 24 July 2006 (UTC)

{FAOL tags) -- deleted - Hard Raspy Sci 01:57, 15 December 2005 (UTC)

The above can be deleted, I read German, and nothing in the english wiki source is left out here from other wiki topics (english version). Ie. some stuff in the German article may be considered off topic in the English version...as other articles cover the same stuff...see water vapor. The only thing I can see is that this article needs editing, if it is to remain combined from 3 articles. Hard Raspy Sci 05:04, 15 November 2005 (UTC)

Request for more information :-/
How is the ideal humidity

Yes, what is the ideal humidity, for comfort/health, indoors? That is why I came to this page (humidity), but I can't find an answer

Agreed. A bit abstract, guys. I came here so I could understand the weather forecasts.

Thermal_comfort has the info, but it's in jargonese. According to Weatherman Steve people feels best at a dew point temperature between 50 - 60° (which he translates as 31-41% relative humidity if the air is 90° )  Gaviidae 23:14, 21 November 2006 (UTC)

Will the relative humidity of two adjacent chambers at different temperatures (and/or pressures) get equal at equilibrium (infinity time) when the chambers are seperated with a wall which is permeable for water vapour? —Preceding unsigned comment added by 130.138.227.40 (talk) 14:30, 19 January 2009 (UTC) How is humidity related to rains? What percentage of humidity in air causes rain? How can a layman, who doesn't understand much of it, use the information about humidity in the weather forecast to access the possibiltiy of rain? —Preceding unsigned comment added by 58.166.237.10 (talk) 07:40, 24 October 2010 (UTC)

In the Specific humidity Section: Can you please define {p_{(H_2O)}  It is unclear if it is related or equivalent to {e_w} in the Relative humidity Section. — Preceding unsigned comment added by Baranij (talk • contribs) 10:00, 17 February 2012 (UTC)

The opposite of sweating
Is it possible to extract heat from humid air by extracting the H2O ? [Is it possible to extract heat from humid air, then use this heat to warm the air, draining the water (now a liquid) that was once just a vapor (ie liquidise the vapor)] Teeteetee 12:05, 16 March 2006 (UTC)
 * Of course :) Air conditioners do this :P  Gaviidae 23:05, 21 November 2006 (UTC)
 * Yeah, ... :) ...but do Air conditioners use the heat(energy) extracted from the air to warm the air being conditioned ?(ie not cooling the inside air, but warming it)Teeteetee 05:52, 8 February 2007 (UTC)
 * Why would you want it to? The purpose is to cool the air.  If air conditioners warmed the air in a room, then why would you have one?  They do warm the air behind them (in a window-shaker) which is usually outside.  A cooler or refrigerator usually warms the air behind it or under it (warms my feet).
 * If you are asking about people using an air conditioner to DRY the air but not cool it, then you really just want a dehumidifier :) They don't specifically heat the air using the energy they've gained, but the heat does turn the air vapour into water (the little dish underneath that you have to empty periodically). Gaviidae 10:12, 29 April 2007 (UTC)
 * some a/c units are capable of being run in reverse to warm a room. Operation is via the unit swapping the flowpaths of the room and outside air streams so the outside air gets cooled and inside air picks up the exhaust heat and is blown back into the room. They are usually only used in warmer climates because they tend to be inefficient compared to gas or resistive heating (and the efficiency goes down as the outside temperature gets colder). Mostly they are used in window/wall units in small, lower-cost apartments (such as studios), as the initial cost of the unit is normally lower and the added costs (due to inefficiency) are absorbed by the tenants.128.158.214.39 19:34, 8 August 2007 (UTC)

practical question
In that warmer air holds significally more water than cooler air. The practical question seems to be - how much more water is held in the air at increasingly varing temperatures.

Given usual and similar pressure and other conditions, what is the relationship of the relative amount of water that can be held at say 90% humidity at 70F degrees versus 80F, 90F, 100F and 110F.

Is there a general formula? Does air at 90F hold twice as much water as 70F?

Air does not hold water.

The Antoine equation is a emperical formula that can be used to estimate the saturated vapor pressure of water (and other substances for tha matter) at different temperatures and pressures.

Go here: http://antoine.frostburg.edu/chem/senese/101/liquids/faq/antoine-vapor-pressure.shtml.

For the question asked. At 90F the saturated vapor pressure of water is 0.699 psi(a); at 70F it is 0.363 psi(a). 0.699/0.363 = 1.9. So an air/water mixture at 100% RH at 90F has approximatly 1.9-times the that of a mixture at 70F.

(A good rough rule of thumb is that a 10 degree (C or K) increase in temperature roughly doubles the saturated vapour pressure, i.e. the amount of water held as vapour in the air. -DGB)

Measurement
I added a section on remote sensing of humidity, and an external link to a more detailed discusssion. KonaScout 23:55, 10 October 2006 (UTC)

Footnote
Can we get that Optiks footnote out of the middle of the page and moved down to the bottom? I can't figure out why it is where it is now, but it looks stupid. 82.93.133.130 09:07, 29 November 2006 (UTC)
 * Done. Vsmith 11:53, 29 November 2006 (UTC)


 * Thanks-- now that I see how you did that, I can do it on the next one : ) 82.93.133.130 22:55, 2 December 2006 (UTC)

I would like to ask if there is a 'league' table of relative humidity around the globe. for example where is the most humid place on earth and were is the least humid place on earth. Also what is the Relative Humidity of these places. Phil Wainwright 11:39, 26 April 2007 (UTC)

Phil_Wainwright

Vandalsim
Since I forgot to put them in my edits, here are my three revert reasons: User:210.3.0.120 added "Popo" to Humidity and Air Density. User:58.107.131.189 changed "volume" to "wettness" in Absolute Humidity and User:64.228.217.130 changed "humidity" to "humidty" under Specific Humidity. Dikke poes 10:05, 29 April 2007 (UTC)

Negative humidity stuff
Moved from article:
 * == Why do we see reports of negative humidity? ==
 * Often, the dew point is used to report relative humidity of the air. The dew point is measured using a wet thermometer. Unlike a dry thermometer, water on the thermometer evaporates, thus a wet thermometer is cooler than a dry one, which can lead to a negative value.


 * This above explanation is wrong.


 * The dew point cannot be used to report the relative humidity. The dew point reports the dew point!


 * The dew point is NOT measured using a wet thermometer. A wet thermometer measures the wet bulb temperature. The dew point may be calculated from the wet bulb temperature if one also knows the ambient temperature and the air pressure. If the gas is not pure air there is usually not enough data known to do the calculation.


 * If by a negative value the question refers to the dew point, then the answer is simple, under dry conditions it is often the case that the gas must be cooled well below 0°C before water condenses (usually as ice). The dew point (or frost point) is a negative temperature in Celsius.


 * The lower temperature of the wet thermometer does not result in a negative humidity. The whole point of a wet thermometer is that it shows a lower temperature (the wet bulb temperature). It is from the wet and dry temperatures that the relative humidity and other units are calculated. If the question refers to a negative relative humidity this is impossible and can only arise when measurement errors are reported by people who do not understand the physics. A negative relative humidity implies that some water must be added before there is none!

Bob Pragnell 10:21, 17 May 2007 (UTC)

It was a bit out of place in the article and quite confused. Bob's comment seems on target, but belongs here rather than in article space - discuss here. Vsmith 11:06, 17 May 2007 (UTC)
 * A wet bulb thermometer and a dry bulb thermometer are identical except that a "sock" made of a suitable fabric is slipped over the bulb of the thermometer that is chosen to be the one which will be dipped into water. The "sock" is tied in place with string at both the top and the bottom of the "sock" and remains on the thermometer for months or until it becomes dirty or soiled.  A "sock" is about three-fourths of an inch (18mm) in length.


 * Side-by-side, both thermometers are lashed to a thin metal plate. A swivel and a handle are attached to the metal plate, forming a utensil called a "sling psychrometer" which is used to move the thermometers through the air by waving the "sling psychrometer" in a circle. Some of the water on the wet bulb "sock" will evaporate and in doing so will cool the wet bulb thermometer.  The dry bulb temperature and the wet bulb temperature are used to calculate the dew point temperature and the relative humidity.  Air pressure must be considered, too, however, a given geographic location will nearly always remain at the same air pressure (i. e., within acceptable limits), such as "30 inches of mercury," "29 inches of mercury," etc.


 * Long ago, scientists calculated relative humidity values for various readings of dry bulb temperatures, wet bulb temperatures, and air pressures. Their calculations have been entered on slide rules, therefore, it is easy to manipulate the slide rule and produce the dew point and the relative humidity.  An experienced worker needs about five seconds to manipulate the slide rule and see the values.


 * I'd never heard of "negative humidity" until I saw it in Wikipedia (above). I suspect that someone has poor hearing and thinks that the words "relative humidity" is "negative humidity."Velocicaptor 11:21, 31 May 2007 (UTC)
 * A more modern way to obtain evaporation of the water on the wet bulb is to use a battery-powered device equipped with a small fan that blows air onto the moistened wet bulb. The "sling psychrometer" is old-fashioned.Velocicaptor 11:47, 31 May 2007 (UTC)

Extra
humidity is water

Incorrect formula
It appears that the formula in Section 1, "Absolute Humidity," is incorrect. The right hand side is identical with the formula for "Mixing Ratio" in Section 3. Moreover, the text says absolute humidity has units of density, while the formula gives a dimensionless ratio.

I don't know what the correct formula for absolute humidity is. It would be great if someone could correct this mistake.

Jmkinder1 13:13, 4 June 2007 (UTC)

Humidity and sweating
In the Middle East, it is very common during summar days that the air temperature reaches 45 to 50 Deg C. On some of these days, the relative humidity also increases, especially on areas near the sea. The result is a very uncomfortable humid state in the late evenings and early mornings. The people go out will sweat, of course. My question is this..at an air temperature of 45°C, for example, suppose the air is saturated with water vapor and the RH is very high. Human body is at a much lower temperature than the air, at this condition. So, the excessive sweat we experience in such a condition is produced from the body itself or IS IT A CONDESED WATER VAPOR from the air itself on the body (which is at a colder temperatuer)? Someone's clarification would be highly appreciated.

213.42.2.22 05:29, 17 June 2007 (UTC) penguine_s June 17, 2007

75.69.32.42 (talk) 16:55, 23 April 2008 (UTC)
 * This is close to a subject I have been trying to understand for many months. Unfortunately I do not yet understand it fully, however...
 * I get the impression that humidity measurement is not as exact as a digital display often indicates. The real/true/exact humidity reading of air can vary quite significantly from one place to another, even if the two places are only a short distance apart(eg. 30mm). So the humidity of the air right next to your skin may well be different to that of your measuring device. In addition, salts and other compounds on the skin will probably be affecting humidity on/near the skin see Critical relative humidity for further information. I hope this helps more than it confuses. I believe this is a confusing subject even for experts, as evidenced by the lack of experts making the subject clear to non-experts. —Preceding unsigned comment added by 80.42.171.167 (talk) 14:46, 26 September 2007 (UTC)
 * Well, it seems pretty simple. If the dewpoint is higher than the temperature of your skin, then not only will your own sweat not evaporate, but extra water from the air will condense on it.  Skin temperatures aren't that warm, so this should be a somewhat common occurrence in tropical regions.  And it seems that 35°C is near the upper limit of recorded dewpoints on Earth (see, for example, http://www.usatoday.com/weather/resources/askjack/archives-weather-extremes.htm), so your hypothetical condition of a 45°C dewpoint would probably only exist in a steam room :)

There must be something wrong with the conditions you describe, because those conditions will kill you in fairly short order. In 100% RH at ambient temps above body temp, there is no way for the body to cool itself. Most likely the air is NOT saturated with water vapor as you might think (although RH is indeed very high, so it feels like it is). If it were, dewpoint would be reached and there would be dew forming on any objects at or below the air temp (e.g. objects in the shade or objects just brought outside from inside), which I assume is not the case. Most likely the water on your skin is sweat, which will always occur whenever the body core needs to cool down and RH is anything less than 100%, even if only barely less, like 99.5%. Whenever body core temps are too high (and hence pores open) evaporation is driven by a water potential gradient, which always exists whenever RH is < 100%. For this reason, other statements in the article related to sweating and humidity are wrong and need to be changed.

Jeeb (talk) 16:47, 29 June 2008 (UTC)

Redirects
I'm not sure "mixing ratio" should redirect to this page. While a valid topic for humidity, it has many other applications, such as chemical solutions and combustion (air/fuel ratio). For example, I got linked here from an article on liquid rocket engines. Maybe a disambiguation page would be appropriate, I don't know how to set this up though.

WikiProject class rating
This article was automatically assessed because at least one WikiProject had rated the article as start, and the rating on other projects was brought up to start class. BetacommandBot 09:54, 10 November 2007 (UTC)

First line possible error
The first line currently states "Humidity is the amount of water vapor in a sample of air compared to the maximum amount of water vapor the air can hold at any specific temperature.". I believe that is the definition of relative humidity. NOT humidity. In common language, humidity is usually taken to mean relative humidity, but not necessarily.Nick R Hill (talk)

In first para, the sentence "Warm water vapor has more thermal energy than cool water vapor and therefore more of it evaporates into warm air than into cold air." needs more explanation, to be moved to a paragraph of it's own, checked for duplication of info in article, or to be removed.Nick R Hill (talk)

Humid redirect
This is problematic, since this article only discusses humidity as the degree of water vapor saturation of the air. But (see arid), "humid" or "humidity" can also mean that there is generally more precipitation than evapotranspiration in a region, seen in the long run. See "Humidity and sweating" discussion above, where it becomes clear that humidity in the scope of the article can also very much apply in a region that by itself is a textbook example of not being humid.

Basically, the article is at present only about the meteorological definition of humidity, not the climatological Thousands of biological and geographical articles link here, but they of course need the climatological definition. (In biology, we usually simply use "wet" for "moist" for meteorological humidity and "humid" for climatological humidity. E.g. "moist cloud-forest in a generally arid region" or "a dry rain-shadow in the humid tropics".) Dysmorodrepanis (talk) 20:43, 28 March 2008 (UTC)

How should humidity be stated?
I have found in some other articles that the humidity of a province/state is stated in degrees Farinheit or Celsius. Everywhere else when humidity is reported, (on tv, in the newspaper), it is stated in % (percent), which makes more sense. Am I wrong or should stating the humidity of a region's climate be stated in %s (percents)? —Preceding unsigned comment added by 209.47.31.6 (talk) 05:19, 9 June 2008 (UTC) 71.53.189.239 (talk) 00:07, 1 October 2008 (UTC)

relative humidity is the moisture content of air (or other gas) expressed as the percent of the moisture content needed to render the air fully saturated. That is, the percent of moisture as relayed to the amount of water in fully saturated air by Bud Wood 71.53.189.239 (talk) 00:07, 1 October 2008 (UTC)

Error/Vague Most Humid Places on Earth
The first section on "Most Humid Places on Earth" is vague, does not have proper reference and seems like a collage or list of places that are humid, but none go to the point of MOST humid. The link given as a reference is one for the average weather conditions in Bangkok, which does not prove that Kerala, Bangkok, et al., are the Most humid places. The rest of the paragraph which mentions Australia, Kuala Lumpur does not have citations. I suggest deleting this part of the Most Humid Places on Earth or editing it until it be backed up by evidence. Otherwise, as I have seen on various "answer" pages, people disseminate the information that Bangkok is the most humid place on earth according to wikipedia (claim which I have not been able to verify). —Preceding unsigned comment added by Hmacnaug (talk • contribs) 15:48, 29 March 2009 (UTC)

Accuracy
This following article provides a much more complete and accurate overview of humidity:

http://www.shorstmeyer.com/wxfaqs/humidity/humidity.html —Preceding unsigned comment added by 78.86.37.251 (talk) 13:12, 3 July 2009 (UTC)


 * Yeah, but it's the view of just one guy, from one perspective(meteorological), with no reference to scientific literature, and no open discussion like here. 79.75.97.79 (talk) 05:03, 23 March 2010 (UTC)

Absolute humidity
"Absolute humidity on a volume basis is the quantity of water in a particular volume of air."

&mdash; and when not on a volume basis, then what ? I mean, the sentence makes it seem like another context is about to be described, but i didn't find it. --Jerome Potts (talk) 21:27, 4 November 2010 (UTC)

Absolute humidity table
Linked table looks a little bit non credible. For example for 50°C and 60% relative humidity is stated that absolute humidity is 49.8 g/m^3 and dew point is 40°C. But for 40°C and 100% relative humidity is stated 51.1 g/m^3 (dew point of course 40°C). These numbers have to be equal. In other cases difference in similar situation is les then 1°C, but not in this case. Maybe problem of interpolation, but this table looks then non credible —Preceding unsigned comment added by 212.5.210.202 (talk) 11:49, 20 December 2010 (UTC)

RESPONSE

Absolute humidity is the mass of water vapor associated with unit volume of moist air. The volume of moist air at 50°C and 40.0°C dewpoint is greater than the volume of moist air at 40°C and 40.0°C dewpoint. As a consequence even though the mixing ratio (g_WV/kg_DA) is the same for the two conditions the absolute humidity (rho_wv with units of g_WV/m^3) is not equal. The following values ASHRAE's Humid Air Properties Excel Add-in functions may help understanding.

$$rho_WV_50C_40CDP=49.14448415 [g_WV/kg_DA]/0.987380597 [m^3/kg_DA]= 49.77258448 [g_WV/m^3]$$

$$rho_WV_40C_40CDP=49.14448415 [g_WV/kg_DA]/0.956719228 [m^3/kg_DA]= 51.36771865 [g_WV/m^3]$$

K289g (talk) 20:29, 18 September 2011 (UTC)

Average global humidity
A section on average global humidity might be added, the phrase is in use, notably this Sunday, on CBS Sunday morning, see Wikinfo:Average global humidity for a stub and a source, which, in turn, cites other sources. User:Fred Bauder Talk 16:19, 24 July 2011 (UTC)

www.CreativeTechSol.com — Preceding unsigned comment added by 139.190.105.89 (talk) 09:24, 29 August 2014 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified 1 one external link on Humidity. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive http://web.archive.org/web/20130608071757/http://www.eoearth.org/article/Abiotic_factor?topic=49461 to http://www.eoearth.org/article/Abiotic_factor?topic=49461

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at ).

Cheers.— InternetArchiveBot  (Report bug) 20:00, 20 July 2016 (UTC)

At a given temperature
I need some clarification here. When the above should be added to a definition? --Stankot (talk) 10:43, 12 September 2016 (UTC)

Aren't these sentences contradictory?:


 * "Absolute humidity is the total mass of water vapor present in a given volume of air. It does not take temperature into consideration."


 * "The absolute humidity changes as air temperature or pressure changes."

--Stankot (talk) 10:50, 12 September 2016 (UTC)


 * I just came here to say this. I was reading that, and I thought "Does not take temperature into consideration.  Changes as air temperature or pressure changes".  Yes, those two statements are contradictory.  But I think I can figure it out.  Absolute humidity is irrespective of temperature, but the temperature of the air determines how much moisture it can hold.  So if you had a sealed cube of air at 25C, and it has 5g/m3 of moisture in that air.  And then you heat that cube to 30C.  It's still going to be 5g/m3 of moisture in that air.  BUT, this isn't completely true in the other direction - if you cool that cube below its dew point/condensing point, say you cool it to 5C, suddenly it can't hold all that moisture any more, and it starts to condense on the walls of the cube.  That's when the absolute humidity measured will start to drop, because it's no longer dissolved in the air, it's sitting in big droplets on the walls of the cube.


 * So to distinguish it from relative humidity, which is a % value that is entirely calculated based on measured moisture and temperature, we can say that absolute humidity is a measurement made irrespective of temperature - IE you do not need a thermometer to measure absolute humidity, but you DO need a thermometer to measure relative humidity. But at the same time, absolute humidity can be AFFECTED by temperature, if the temperature drops so low that the air can no longer hold that much moisture.


 * Hope that clears it up a bit, and I hope someone else reads this and makes the article less confusing.  moeburn (talk) 22:26, 10 February 2017 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Humidity. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20150130212102/http://www.soest.hawaii.edu/MET/Faculty/businger/courses/notes101/28ModelingClimate.pdf to http://www.soest.hawaii.edu/MET/Faculty/businger/courses/notes101/28ModelingClimate.pdf

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 15:13, 6 April 2017 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Humidity. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20070929100226/http://www.komotv.com/news/archive/4092941.html to http://www.komotv.com/news/archive/4092941.html

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 17:04, 21 May 2017 (UTC)

Keep it simple

 * Absolute humidity is the quantity of water vapor in the air expressed by weight.


 * Specific humidity is the quantity of water vapor in the air expressed by a ratio of water vapor to dry air.
 * (Such a ratio might be 1:200, for example). That would specify that the air contain one part water vapor and 200 parts dry air.
 * Do you have a source for this definition? Most sources say the denominator should be mass of total moist air. See: http://www.arl.noaa.gov/faq_c1.php Glueball (talk) 05:27, 3 March 2017 (UTC)


 * Relative humidity is the quantity of water vapor in air expressed by the use of a percentage.
 * This method is the cause of a great amount of confusion of the subject of humidity. Now that computers have been created which can access a database and display absolute humidity figures and specific humidity ratios in the blink of an eye, the relative humidity method may soon be replaced by one of the other methods, which do not introduce any confusive quality.


 * Each percentage point is applicable to the qualities of the air which are present at a specific moment.  Any change in air temperature or air pressure instantaneously changes the capacity of the air to hold water vapor.  Every combination of air temperature/air pressure has its own maximum amount of water vapor that the air will hold.


 * At the same air pressure, the maximum amount of water vapor in air (expressed as 100%) is much greater at high temperatures.


 * At the same air pressure, very cold air at -40 degrees C (-40 degrees F) has the capacity to hold very little water vapor. Nevertheless, the maximum amount of water vapor will be expressed as 100% relative humidity.


 * The same amount of water vapor that is expressed as 100% relative humidity at -40 degrees will be expressed as only 20% or 10% or 5% or 1% (et cetera) at certain other warmer air temperatures.


 * Supersaturation, where the capacity of air to hold excessive quantities of water vapor is present, is an unnatural condition which may be ignored since it does not ever occur in the Earth's atmosphere, normally.  Keep it simple.


 * 141.151.140.116 11:51, 16 August 2005 (UTC)

I agree with "keep it simple" and to the point, however Relative Humidity will never go away, especially due to its highly important property that defines condensation. Absolute and Specific do not do that, but that does not degrade their importance either.
 * Hard Raspy Sci 04:45, 15 November 2005 (UTC)


 * Ok, did a lot of edits...don't pay attention to the summaries on the history page, they may not make sense. Still needs more work though...
 * Hard Raspy Sci 06:13, 15 November 2005 (UTC)

NSDL
NSDL is temporarily down, do not edit unless permanent. Thanks - Hard Raspy Sci 01:55, 15 December 2005 (UTC)

Wiki Education Foundation-supported course assignment
This article was the subject of a Wiki Education Foundation-supported course assignment, between 7 January 2019 and 9 April 2019. Further details are available on the course page. Student editor(s): Yunbing Song.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 00:03, 17 January 2022 (UTC)