Talk:ISO 31-11

Unicode UP TACK versus PERPENDICULAR
Okay, now we are getting really deep into the Unicode standard, but shouldn't the perpendicular operator be ⟂ (U+27C2 PERPENDICULAR) instead of ⏊ (U+23CA DENTISTRY SYMBOL LIGHT UP AND HORIZONTAL, as currently used in the article)? --Abdull 22:15, 28 May 2006 (UTC)


 * Well spotted! My mistake. The character I actually wanted to use was ⊥ (U+22A5 UP TACK). I took a wrong turn in the code charts, was heading for APL symbols, but actually ended up in Japanese dendistry symbols ... a likely peril in the age of mega character sets. UP TACK is widely supported in existing fonts and seems the appropriate Unicode 4.0 character for the perpendicular symbol to me. A dedicated ⟂ (U+27C2 PERPENDICULAR) was added only quite recently (Unicode 4.1) and I'm not fully convinced yet that there was a good case to disambiguate between the two. The glyphs for UP TACK and PERPENDICULAR are for all practical purposes identical, and the difference between a constant and an operator only matters in TeX-style math-rendering implementations that try to automatically insert whitespace near operators, which is irrelevant for HTML, Wikipedia, etc. So I prefer to use UP TACK instead of PERPENDICULAR for the moment, because the latter is not yet widely implemented in fonts. Markus Kuhn 19:19, 29 May 2006 (UTC)

Angle brackets
I'm seeing ? where I think other character should be. In the mathematical symbols table it has the line:
 * ⟨⟩ |?a+b?c | ac+bc, angle brackets

Shouldn't that read:
 * &lt;&gt; |&lt;a+b&gt;c | ac+bc, angle brackets

Or am I missing something.


 * The font your particular browser uses probably still lacks glyphs for the two characters U+27E8 (MATHEMATICAL LEFT ANGLE BRACKET) and U+27E9 (MATHEMATICAL RIGHT ANGLE BRACKET). The angle brackets have, unfortunately, a somewhat confused history in Unicode. They were for a while mistaken to be CJK wide characters, and disambiguated from these (unnecessarily) rather late. Markus Kuhn 22:01, 3 July 2006 (UTC)


 * It does seem to be a font issue, but I wonder if many people will have the same issue. I'm on Mac OS X 10.4.6 and though I have all of the standard internet/web fonts installed (and then some) I still don't have any that have a glyph for this character. I wonder if a note should be added to show what it should roughly look like using another more commonly existing glyph (like simply the greater than less than charaacter glyphs like I used above). I don't think the characters in the main text should be changed, but just suggest a note be added, since I don't imagine I'm the only one to encounter this problem. As the fonts improve and proliferate, the note could then be taken away. --Cplot 23:13, 3 July 2006 (UTC)

BTW, I have the same problem with the perpindicular glyph in the comment above (though the dentistry glyph displays fine, so maybe a similar not should be added there if the peripindicular character is correct).


 * Please report what exact browser and font you are using, and I'll be happy to investigate and report the problem upstream. I'd rather see this fixed in the font and not in the article. Markus Kuhn 08:41, 5 July 2006 (UTC)

Note on Unicode repertoire used
Please do not deface the article with lots of commentary on the font inadequacies of individual web browsers and fall-back notations. If at least one major browser (e.g., Firefox under a recent Linux distribution) displays the Unicode character adequately, then this should be sufficient here. I very much like this article to be a bit leading-edge with regard to how Unicode can be used on Wikipedia to help with mathematical and scientific typesetting. Use this article as a reference in bug reports to your font or browser developers, as a benchmark to drive forward the state of the art, and as a copy-and-paste source for authoring other articles. Do not dumb its repertoire down to the oldest web browser that you can find. I'd like to see the Unicode repertoire needed to typeset ISO 31-11 to become commonly supported in fonts. This was my main motivation for contributing this article. The repertoire is already widely supported. For example, all the characters currently in the article have been available for many years in the standard X11 fonts, and are displayed correctly even in ancient command-line text-mode browsers. (If circumstances outside your control force you use outdated commercial products, rest assured that they will catch up three versions later, as usual.) Markus Kuhn 08:41, 5 July 2006 (UTC)


 * I'm sorry you felt those notes were defacement. I felt I was improving the article, which btw is quite helpful. I fully support your goals for this article, but feel some explicit statements to that effect would be helpful. I'm running another leading edge operating system with X11 installed and I'm missing glyphs for these characters. It took me some time to figure out what was going on and I felt that, rather than make everyone else go through that same process, I'd provide the answers I gleaned for everyone else in notes to the table.
 * I've sinced moved those note to footnotes so they won't clutter the table. Let me explain my reasons. If we want this to be leading edge, then we need to put the correct unicode character in the text. However, since it's also an enyclopedia article, the general reader should learn the basics about the ISO31-11 standard. If an important glyph is missing then they'll go away scratching their heads. Apparantly neither  of us have a perpindicular glyph, so it's counterproductive in trying to push the edge to simply substitute a similar character without noting that fact. It makes everyone reading the article complacent with their font support even when they're missing support for an important unicode character. The characters are important in many more places than just TeX. They're meant to convey meaning: both for machine processing and human readable form in a variety of places. Substituting a character with a similar looking glyph may convey the meaning in human readable form, but it destorys the meaning in terms of machine processing. Finally, on the angle brackets, I think some substitute is necessary. I've checked across Firefox and Safari (a KHTML descendant) and neither displays these characters correctly. As I mentioned I have a standard X11 enviornment installed, so that doesn't help the situation. I also have the standard "web" fonts installed, which is all we should count on a site like Wikipedia. It is probably these fonts that need support added for the perpindicular and the angle brackets.
 * So to further our worthy goals, I've added these notes again as footnotes. I've also added a requesti for readers to contact their vendors to imrpove support for these characters. I think this furthers our goals.
 * One last point. i think it might be helpful to list the character references for these unicode characters. In the notes I added I used the character references in my markup. I think that's helpful for someone who's used to looking at HTML source. A step further might be to add a column to the tables with the character reference listed explicitly.
 * Just a few suggestion. Any thoughts? --Cplot 17:41, 5 July 2006 (UTC)


 * A couple more comments.To the note, I added the angle brackets from the CJK punctuation category. These look very similar in glyph form and from the name I gather are meant to dennote the nearly same thing in character form. Also I wonder if the note I wrote and the one on unicode support already in the article should not be revised and moved to the top to warn readers of these unavoidable issues? --Cplot 17:50, 5 July 2006 (UTC)


 * To go back to the original point, how about two columns: a "text" or "unicode" one and and then a forced-PNG  one?  That means that unicode compliant browsers can show off their lovelyness, and everyone else can still use the article.  --Harris 20:58, 17 May 2007 (UTC)

Specificity of ISO 31-11?
I was wondering too, whether ISO 31-11 actually specifies the Unicode characters or some other character specification? Or does it simply designate a standard of glyphs for use in math notation? It might help the article to make that clear too. I'm sorry if this question is already answered and I missed it.--Cplot 20:29, 5 July 2006 (UTC)


 * ISO 31-11:1992 makes no reference to Unicode, ISO 10646, or any other particular coded character-set standard. It simply presents example glyphs on paper, very similar to what you get if you printed out this article on a printer using a carefully selected font. Therefore, it would be inappropriate, in my optinion, to clutter this article with a lot of Unicode references, because this is currently beyond the scope of ISO 31. Such a cross-reference might, however, be a good extension for the next edition of that standard. Until then, I think all we should do is make sure that we use the Unicode repertoire that we have wisely. Detailed guidelines on the use of the Unicode repertoire for mathematical typesetting in HTML and Wikis should better be collected elsewhere. Markus Kuhn 13:29, 9 July 2006 (UTC)


 * That's precisely the type of information that I think would be useful for the article: that the standard specifies glyphs and not characters. It's important to explain to readers that ISO 31-11 recommends representations, and that those representations do not mean the same thing as the unicode characters used in the article. The ISO writes their specifications largely for print distribution. This issue doesn't arise for them. However, here where we're writing about the standard largely for electronic distribution, we face dealing with this ambiguity. It may be the ISO should have dealt wit the ambiguity for the electronic distributions of the proposal, but that's another issue.


 * If the standard only specifies representations, then we might as well use the greater-than and less than signs for (angle brackets or the CJK angle brackets) or whatever characters will reach a wide wikipedia audience. Those don't dumb down the article, they just serve as approximate representations to what the standard recommends (which is all anyone can do with the level of specificity of the standard).


 * So to sum up, I think some mention that the standard specifies representations and not precise characters should be made. Then as far as representing those characters we need to follow Wikipedia manual of style and ensure this article is readable by a broad range of readers (i.,e., uses characters for the least common denominator). This gets in the way of the other goals mentioned above. I think it would be far more desirable to typeset the with the appropriate and precise unicode characters for others to use and have a note specifying dumbed down characters than to have the only the dumbed down characters in the article. That's my feeling on that anyway. --Cplot 19:43, 9 July 2006 (UTC)

use of math tags
I have used math tags for angle brackets and perpendicular signs. I think that this is a better and easier solution that works for everybody.

Size is not optimum, but could be tweaked, as I did with \perp.

Check and change back if you do not like.

Regards,

Jakubi 17:14, 9 September 2007 (UTC)

Creating the glyphs
There may be some existing sister article that covers the following; if so we should identify it and create a prominent link. If not, it would be useful to include in this article an indication of how a reader might create the glyphs discussed here. Obviously, different typesetting systems vary, but the three that seem straightforwardly useful (where they exist) are: HTML entities; Unicode codepoint; Tex escape sequence. I believe that adding a column (or perhaps adding to an existing column) with this "how to represent" information is useful and encyclopedic. LotLE × talk 19:50, 18 January 2010 (UTC)

Equivalent symbol....???
See Talk:Table of mathematical symbols --222.64.27.154 (talk) 01:42, 20 March 2010 (UTC)

Matrices
Could someone that has access to the ISO standard check the notation for matrices, pls. ISO_31-11 gives A, while the NIST Guide (p.35) gives simply A (or, more precisely, $$A$$). Thanks! Fgnievinski (talk) 02:06, 30 March 2010 (UTC)

Sans serif suspicious
I don't mean to be pedant, but most symbols in this article are sans serif, and I'm not sure that's intended. I wish I had access to the ISO standard to check, but looking at the NIST Guide, it says for example (p.34): "Symbols for vectors are boldface italic, symbols for tensors are sans-serif bold italic". Though not explicitly stated, I interpret that as "Symbols for vectors are seriffed boldface italic, symbols for tensors are sans-serif bold italic", otherwise there is no way to distinguish vectors from tensors. As another example, the Guide says (p.34): "symbols for quantities and variables [are] italic; symbols for units [are] roman". According to the article Roman type, in Typography "roman" is ambiguous -- it can mean either: Should we rewrite the article replacing, e.g., A by $$A$$ (i.e.,  by  )? Fgnievinski (talk) 02:41, 30 March 2010 (UTC)
 * a synonym for serif;
 * the upright counterpart of an italic typeface, regardless of whether the type design is seriffed or a sans serif.

(Belongs to) ∈ Looks ugly on the main page
It looks kind of weird on the article, but its fine in the discussion page. It does have something to do with the font It looks nothing like the TEX equivalent. [] — Preceding unsigned comment added by 180.215.170.131 (talk) 12:54, 12 January 2012 (UTC)

Phi
Does anyone know if the ISO standard uses an open phi ($$\varphi$$) or closed phi ($$\phi$$) for cylindrical and spherical coordinates? Also, is the answer the same for ISO 80000-2? JonH (talk) 07:00, 25 October 2012 (UTC)


 * The symbol used by ISO 80000-2 (p25) looks to me like the open version, $$\varphi$$. The same symbol is used for both spherical and cylindrical co-ordinates. Dondervogel 2 (talk) 17:16, 25 July 2013 (UTC)


 * Thanks for the reply. So it seems that Wikipedia is using the correct symbol in this case. JonH (talk) 18:08, 25 July 2013 (UTC)


 * The correct symbol indeed for phi, but not for theta (also open according to 80000-2). What bothers me is more is the insistence throughout Wikipedia on italicising the mathematical constants e, π and i, which according to ISO should be upright. Dondervogel 2 (talk) 19:05, 25 July 2013 (UTC)

Inappropriate italicisation
I agree with slawekb. This particular standard might be superseded, but in modern standards, mathematical constants like e, pi and i are upright. Dondervogel 2 (talk) 09:40, 9 May 2015 (UTC)


 * Yes, in the ISO 80000-2 that supersedes this one, mathematical constants are upright as well.  Sławomir Biały  (talk) 12:22, 9 May 2015 (UTC)


 * It doens't matter what the recomendation is... Wikipedia follows standard practice, which is to universally ignore this recomendation.  14:18, 9 May 2015 (UTC)


 * Yes, in practice thus recommendation is seldom applied. But it is what it is, and this is an article about the standard, which includes typesetting conventions, not standard practice on Wikipedia. If you would like to add a comment to the article that ISO 31-11 is universally ignored in this point (appropriately sourced) then go ahead.  But we don't get to make up our own version of the ISO standard just because it disagrees with conventions on Wikipedia.  That just makes no sense at all.   Sławomir Biały  (talk) 16:14, 9 May 2015 (UTC)