Talk:Kawasaki triple/Workpage

The Kawasaki triples were a range of 250 to 750 cc motorcycles made by Kawasaki from 1968 to 1980. The engines were air-cooled, three-cylinder, rotary valve two-strokes with two exhaust pipes exiting on the right side of the bike, and one on the left. It was the first production street motorcycle with capacitor discharge ignition (CDI). Right from the first triple model, the 1968 Mach III H1 500 cc, it was a sales success that gained a reputation for almost unmatched acceleration as well as an air of danger for the difficulty in controlling the bike's power with its limited chassis, suspension, and brakes.

Mach III H1 500
The market for motorcycles in 1968 had been changing from tame, utilitarian transport to more aggressive sporting motorcycles that disregarded fuel economy and noise, in favor of quicker quarter mile times, which were prominently advertised by manufacturers. While Kawasaki had an inline-four four-stroke in development, it was not going be ready in time to upstage the 1969 Honda CB750, so instead they moved up the release their unusual rotary valve two-stroke triple to "make a real splash". They turned to the N100 Plan, a project begun in June, 1967, whose intent was to design the most powerful production motorcycle engine in the world. After first they considered increasing the bore of an existing engine, but instead created an all-new engine, experimenting with both inline and L cylinder arrangements, with both two and three cylinders. They settled on an inline-three arrangement after testing showed that an inline layout did not adversely affect cooling of the middle cylinder.

The result of this project was the 15° inclined, inline-triple 498 cc H1 Mach III, first produced in September, 1968, 14 months after the N100 project began. The new model did indeed sell well with young men in the late 1960s, with total production eventually exceeding 110,000 units, though it was unpopular with authorities. The bike gave Kawasaki a "rebel" image, "outside the law", which played well with sport bike riders. The racing version, the H1R ridden by Ginger Molloy, took second place in the 1970 Grand Prix World Championship.

The H1 was the first multi-cylinder street motorcycle to use capacitor discharge ignition (CDI) which operated through an automotive style distributor, previously only used in off-road single cylinder motorcycles. The first version of this electronic ignition was overly complex and proved unreliable, so Kawasaki gave up on it briefly, using traditional breaker points, one set for each cylinder, in 1972. For the 1973 H1D, a redesigned CDI was used, which was more reliable with a hotter spark at lower engine speeds, which in turn made it possible to re-jet the three Mikuni carburetors for a wider power band. The US version came with a high handlebar, but a low bar was used in the European market.

The bike had both detractors and enthusiastic fans, who either complained of poor handling and tendency to wheelie, or praised the power, light weight, and tendency to wheelie. The H1 had a high power-to-weight ratio for the time, 60 hp and a dry weight of 384 lbs, comparable to a top racing motorcycle, but had generally poor handling and weak drum brakes front and rear. It could accelerate from 0 to 1/4 mi in 12.4 seconds. The Mach III became known to its critics as "dangerous for inexperienced riders" due to this combination of high power and poor brakes and suspension. However, Motorcycle Classics said in 2009 that the frequent complaints about the brakes of the H1 by modern writers did not account for the generally poor braking of all motorcycles of the period, noting that in a 1970 Cycle magazine comparison of seven top sport bikes of the time, the H1's braking performance was second only to the Honda CB750.

The H1 was loud, due to the use of racing expansion pipes, brought barely within the limits of noise regulations for the period. The bike was also known for wheelies, occurring with little intention by the rider, even during cornering. The two-stroke engine's suddenly increasing power curve, with little response until a rush of power about 5,000 rpm, contributed to this unexpected liftoff of the front wheel, creating "fearsome reputation" from tales of "scary performance." The notoriously flexible frame was strengthened over the years, along with shifting the center of gravity to decrease the tendency to wheelie.

While Kawasaki was working to, "make the H1 acceptable in civilized society", they also released the delayed inline-four four-stroke, the Z1, in 1972, which had adequate brakes and handling, comfortable seating, and did not guzzle fuel. The sales success of the Z1 demonstrated that there were more buyers for higher-priced but less obnoxious sport bikes, than buyers who would accept numerous compromises for an extremely fast motorcycle at a low price. More stringent noise and pollution regulations also contributed to the end of the H1 500 production, whose final year was 1976.

The Mach III H1 500 subsequently has been of great interest to collectors and historians of motorcycles, often appearing on lists of most significant motorcycles, and, with some irony, "worst bikes" lists. Cycle World semi-seriouly joked that the bike was one of the "10 Worst" for its total compromise of good qualities other than speed, and that the bike "introduced" to America the body cast and liability lawsuit. The H1 was included in the Guggenheim Museum's 1999 The Art of the Motorcycle exhibition in New York, Chicago, Las Vegas, and Bilbao, Spain. Motorcycle historian Clement Salvadori noted in the Guggenheim's catalog that the H1, "was one of the least useful motorcycles available on the market" yet still sold very well because, in the heyday of American muscle cars where quarter mile times were paramount to the young male target buyer, it, "could blow just about anything else off the road — for less than $1,000." Roland Brown agreed that it could, "beat almost anything away from the lights." Salvadori added that, "Motorcycle lore has it that very few original owners of the Mach III survived." While older Baby boomers collected classic brands of the 1950s and 1960s like BSA, Norton and Triumph, a younger generation of motorcycle collectors was nostalgic for H1 Mach IIIs along with other bikes of the era, Honda CBs and CLs, Yamaha RD350s and Suzuki Hustlers.

S1 250 and S2 350
In 1971, the S2 350 was introduced, and in 1972 its smaller brother, the S1 250 became available.

H2 Mach IV 750
The H2 750 was introduced in 1972, the culmination of Kawasaki's two-stoke project. Kawasaki said of the bike, "It's so quick it demands the razor-sharp reactions of an experienced rider."

Its engine displacement of 748 cc produced 74 hp at 6,800 rpm. The engine was entirely new and not a bored-out 500. With larger displacement as well as less aggressive porting and ignition timing, the H2 750 had a wider power band than the 500 H1, though Roland Brown said it was still "barely more practical" than the smaller predecessor, because Kawasaki had "done little" to address chassis problems, and so the bike was still prone to speed wobble. The 14 bhp gain over the 500 H1 put the H2's output well ahead of its close rivals, the air-cooled four-stroke Honda CB750 and the liquid-cooled two-stroke Suzuki GT750.

To help address the speed wobble issue, the H2 came with a friction-type steering damper, as well as a built-in frame lug to attach a hydraulic steering damper. The H2 had a front disc brake, an all-new capacitor discharge ignition system which performed better than cap and rotor type, was virtually maintenance free, and was unique to the H2. The H2 also had a chain oiler, and a steering friction damper. The front disc brake performed adequately, though some riders added a second front disc for more braking performance.

Even with its limitations, the H2 was a success, because there were not many other bikes that could, Brown said, "even approach" the performance of the H2 Mach IV. A standard, factory produced H2 was able to travel a 1/4 mi from a standing start in as low as 12.0 seconds with an expert rider onboard, or 0 to 100 mph in under 13 seconds.

The H-2 was comparison tested up against the Ducati 750, the Honda CB750, the Harley-Davidson Sportster 1000, the Kawasaki Z1, the Triumph Trident 750, and the Norton Commando 750. The competition consisted of acceleration, braking distance, and road race course lap-times. Each test was run several times including 10 attempts at a fastest road course time. The H-2 was the fastest accelerating machine, posting the fastest 1/4 mile run on a drag strip. Experts were surprised at the other results. Despite an uncomfortable feel and slight front wheel hop under hard braking and not giving the sensation of stopping particularly fast it had the shortest stopping distance and highest braking G load of all the bikes. On the road course, despite what had been heard and written about its ill handling, frame flexing and the supposed tendency to speed wobble exiting high speed turns, it was tied for the fastest lap time with the Kawasaki Z-1 to the tenth of a second. Overall the Kawasaki H-2 750 had the lowest ET, second-highest quarter-mile speed, the fastest lap time, the strongest braking force, the highest torque and horsepower readings on the dynamometer, the highest power-to-weight ratio, the lowest price and scored by points for performance was by far the least expensive per pint.

Kawasaki's reputation for building what motorcycle writer Alastair Walker called, "scarily fast, good-looking, no holds barred motorcycles" began with the H-1. The H-2 was part of the rise of the Japanese superbikes, contributing to the decline of Harley Davidson, and nearly extinguished the British motorcycle industry in the US for a long period.

S3 400
In 1974, the 350 cc S2 was expanded to and replaced by a 400 cc S3. In addition, each model year following was met with toned down performance in attempt to meet new emissions regulations. The H and S series ceased production after 1975, and the model line became the KH series in 1976, omitting the 750 from the lineup and leaving just the KH250, KH400 and KH500. The last year for US sales was 1977, with only the KH400 and the KH250 left in the lineup. Both models continued to be available in Europe and elsewhere until 1980. Stricter emissions regulation and advances in 4-stroke technology caused the demise of the Kawasaki triples in both cases.

The S1 350 was popular for some time as a budget performance bike in England because of its small size, and the fact that at this point in time it was legal for learners to ride.

Timeline

 * 1968
 * H1 500 cc Mach III (September) White w/blue stripes, distributor CDI ignition, drum front brake, "Mach III 500" badge on side cover and "electronic ignition" decal on oil tank. Early 69 models had bridged port intake design, with "windowed" carbs. Late 1969 saw the introduction of the Charcoal Grey model, but a common misconception is the charcoal grey model is called a 1969 model&mdash;it is indeed a 1970 model. Kawasaki paperwork that came with the bikes, and the sales brochures confirm this. This has been spread by many in order to add value to their bikes by being able to call them a first year model when they are not. The red and white model replaced the peacock grey model due to poor sales.
 * 1971
 * H1A 500 cc (September)
 * 1972 Entire line introduced, intended to be similar in style, with the "swooping" racing stripes on the tank that distinguished the triples.
 * S1 250 cc,
 * S2 350 cc, drum front brake
 * H1B 500 cc (January), orange, disc front brake, CDI dropped for breaker points, steering damper and a front disc brake.
 * H1C had CDI ignition instead of points as found on an H1B, and a front drum brake as opposed to the disk brake on the H1B model. The H1C carried over the stainless fenders from 1971 along with the complete fork assembly and gauge style. Engines and exhaust were also carry overs from the 1971 model making it a true hybrid of the new 72 H1B and the 71 H1 models.
 * H2 750 cc, front disc brake, CDI ignition with one igniter unit per cylinder.
 * 1973
 * S1A 250 cc
 * S2A 350 cc
 * H1D 500 cc Adopted H2's CDI ignition and the styling that would be used on the later 1974 models, including a wider seat and tail section paint matching the other body panels.
 * H2A 750 cc
 * 1974 All models restyled with a new cleaner design that resembled the Kawasaki Z-1, with an instrument "pod" rather than separate instruments. All models revised for more civilized performance at the expense of raw power.
 * S1B 250 cc front drum brake.
 * S3 400 cc disc front brake, restyled cylinder head design for better cooling.
 * H1E 500 cc
 * H2B 750 cc
 * 1975
 * S1C 250 cc
 * S3A 400 cc
 * H1F 500 cc
 * H2C 750 cc
 * 1976 H2 dropped from line, models renamed "KH" to match the "KZ" line of four-strokes.
 * KH-250 250 cc
 * KH-400 400 cc
 * KH-500 500 cc
 * 1977–1980 Only surviving models are the KH-250 and KH-400.