Talk:Kennametal

Press release?
This reads like a press release. 76.17.241.46 01:37, 22 March 2007 (UTC)
 * I'm inclined to agree, whilst the company has been established for many years I can't help thinking it does seem rather like a company advert than a substantial article. Brollachan 15:38, 21 August 2007 (UTC)
 * Just because somebody is not skilled enough to copy edit it dose not make it suitable for an article. Is a company is in a recognise index of companies it has at least some note. why not just Tag with one of edit required tags, and adding it the a project that covers the relavent area then some one with Knowledge of company's can edit it to expand or remove copyvio or add look. some may say subjects like "big brother" are Non-notable and should be AfD ed.BulldozerD11 (talk) 14:07, 4 July 2008 (UTC)

Kennametal announces layoffs
There will be around 1200 job cuts by the company. January 2009

The company will reduce its global salaried workforce by 800 positions within the next three to six months. Another 400 position will be eliminated in April 2009. The company is going for restructuring, and hence the 1200 job cuts at Kennametal are being justified as a part of this restructuring exercise.

Other news about Kennametal layoffs: The company had plans to layoff 1,125 employees. But the company has ended up firing 1,380 employees, or about 30 percent of its total workforce.

Tidbit
Claremont McKenna College, formerly Claremont Men's College, changed its name back in 1979 or 1980 after a large donation from Old Man McKenna of Kennametals. 38.115.185.13 (talk) 16:07, 7 May 2011 (UTC)Trailblazer

Bring Extrude Hone in a standalone article
Hello,

A pre-existing weak dedicated Extrude Hone Corporation (now Extrude Hone LLC)page has been redirected to Kennametal who owned that company for 10 years only. I would suggest writing an article on solely Extrude Hone. As stated the company has been divested by Kennametal and is back to a level of independence that it had in the past under Larry Rhoades ownership. I submit below some key facts and milestones supported by external links as notability requires only the existence of suitable independent, reliable sources. I perfectly understand that Wikipedia is not a promotional tool, I just think that a company who created the technology Abrasive Flow Machining to the point people use "Extrude Honing" on their drawing like the key OEM's in the aerospace could deserve an article. Please consider that Extrude Hone invented as well the technology MICROFLOW which s critical in the manufacturing of injection nozzle for cars and trucks. When I see that the Ex One business ( previously owned by Extrude Hone was created and divested by Larry Rhoades) has his own article https://de.wikipedia.org/wiki/ExOne I do feel Extrude Hone should have one too.

Extrude Hone LLC ( previously Extrude Hone Corporation) is a manufacturing company specializing in the deburring, polishing, edge rounding, flow tuning of airplanes, automobile, trucks, medical and die industry parts such as impeller, hubs, gearboxes, fuel system injector, aluminum dies, implants and a variety of general engineering workpieces. The company was founded in 1960 in Pennsylvania by Lawrence (Larry ) Rhoades

History 1960 	Founded of Manufacture and sales of AFM machines 1974	Set-up of distribution and machine service for ECM units of AEG Elotherm in North America 1975	Commencement of manufacturing ECM machines 2000	Takeover of Robert Bosch Surftran Division incl. the product lines ECM and TEM 2000	Starting manufacture of ECM units in Buxheim 2001	Acquisition of Dynetics, LLC incl. the product lines Chemtool, Dynaflow und Dynastream [ ] 2002	Takeover of the TEM business unit of Bosch Rexroth AG 2005     Acquisition of Extrude Hone by the Kennametal Latrobe (PA), USA. Kennametal is one of the leading cutting tools manufacturers 2005 	Acquisition of VMB Vorrichtungs- und Maschinenbau Babenhausen GmbH and DIVA-TEC GmbH, manufacturers of electrolytic deburring machines 2007	Merger of all above German legal entities into Extrude Hone GmbH 2008	Transition to brand name Kennametal Extrude Hone 2009	Set up manufacturing in China 2015      Conversion from Kennametal Extrude Hone Corporation to Extrude Hone LLC 2016	Acquisition by Madison Industries (a privately held company with $7 Billion Enterprise value) 2018 Bosch Rexroth AG transfers https://extrudehone.com/bosch-rexroth-ag-transfers-tem-customer-service-to-extrude-hone Thermal Deburring TEM customer service to Extrude Hone

Manufacturing Process Today Extrude Hone LLC is specialized in Abrasive Flow Machining (AFM), Electrochemical Machining (ECM), and Thermal Deburring (TEM). Extrude Hone LLC is an OEM manufacturer for the above-mentioned technologies. Extrude Hone also uses these machines in his contract shops.

Footprint Today Extrude Hone LLC, has Manufacturing contract shops throughout the United States along with other in Germany, England, China, India and Japan.

See Also Abrasive Flow Machining  [] Electrochemical Machining [] ……………………………………………………

EXTRUDE HONE LLC

Extrude Hone Headquarter in Irwin, PA, USA

Type:                LLC Industry:         Manufacturing,  Machine Tool                                 []           []

Founded:        1966

Founders: Lawrence Rhoades

Headquarter: Irwin PA, USA

Area Served:  Worldwide

Key People:              Christian Bernert      President and CEO Alexander Müller     Operation and Technology MD                          Werner Berlage         HR Director Bruno Boutantin      Marketing Director Kunal Bhonsle          Managing Director USA Andreas Wolfrat      Managing Director Europe Atsushi Murakami   Managing Director Japan and ROA Leon Li                       Managing Director China Debnath Goswami   Managing Director India

Products: Abrasive Flow Machining, Thermal Deburring,                       []            [] Electrochemical Machining, Contract Manufacturer                          []          []

Key Industries: Automobile, Aerospace                                                                                          []               [] Die and Mold, Energy technology                                                                []              [] Implant (medicine), Surgical instrument                                                       []        [] Semiconductor, Firearm                                                                                         []  []

Revenue:    $75m (2019)

Owner:              Madison Industries

Number of           320 employees:

Subsidiaries:    Extrude Hone Ltd  (UK) Extrude Hone India Pvt. Ltd Extrude Hone GmbH Extrude Hone K.K.                           Extrude Hone (Shanghai) Co, Ltd.

Website            www.extrudehone.com www.de.extrudehone.com www.fr.extrudehone.com www.it.extrudehone.com www.jp.extrudehone.com www.extrudehone.com.cn                          www.madison.net

TrulyBlue Extrudehoner (talk) 15:08, 28 September 2020 (UTC)


 * Please create the new article via Articles for creation. Thanks! --Justanothersgwikieditor (talk) 03:12, 15 October 2020 (UTC)