Talk:Lumped-element model

A special case of an RLC circuit?
The Lumped element model seems t obe a special case or at least closely related to the RLC circuit. --Werfur (talk) 20:43, 21 October 2012 (UTC)

Low impedance breakdown?
I have removed a paragraph referring to a supposed failure of the lumped element model for low impedance devices. Are there any references for such a phenomena? Tomer Ish Shalom 13:52, 30 November 2006 (UTC)

Lumped element is a finite element in space and time required to travel within a lumped element is considered negligible, whereas distributed element is infintesimal. I have corrected the definition.

Lumped-Element Models in Mechanical/Aerospace/...
Shouldn't there be some discussion of the use of lumped-element models in other engineering fields? I'm studying thermoacoustics right now, and I've seen many papers modeling fluid dynamics, etc. as lumped-element circuits (cf., ). Robin Z (talk) 14:14, 21 November 2007 (UTC)

History of the Lumped Element Model
I think some discussion of how and why the LEM came to be would go well with this article, along with some discussion of its origins (i.e. did it come from Maxwell's equations under certain restrictions (no current build-up on elements, etc) or did it originate with Kirchoff or was it maybe even before Kirchoff and his laws? Also, this article is lacking any references. Maybe someone with knowledge in this area could expand it better than I. I've had a look around on the internet and in the few textbooks I have, but to no avail. 90.204.100.172 (talk) 10:31, 30 August 2009 (UTC)

I was appalling at Maths when I went to Uni to study Computer Science, so I had a real hard time with circuit theory. That's my background, now the question: Does the Hybrid Pi model of the transistor also fit into this article as an LEM? —Preceding unsigned comment added by H-b-g (talk • contribs) 19:53, 19 July 2010 (UTC)

"Lumped parameter model" merged
Bruyninc (talk) 10:14, 17 July 2010 (UTC)

The. Worst. Intro. Paragraph. Ever
Seriously. It couldn't be a more perfect example of abstract nonsense if it tried. Were you *trying* to win a prize? I'm reasonably sharp, but boy, oh, boy this had me totally stumped until I did a quick Google and turned up this eminently more reasonable explanation (for the electromagnetics aspect):

A section of a transmission line designed so that electrical or magnetic energy is concentrated in it at specified frequencies, and inductance or capacitance may therefore be regarded as concentrated in it, rather than distributed over the length of the line.

Compare and contrast with:

simplifies the description of the behaviour of spatially distributed physical systems into a topology consisting of discrete entities that approximate the behaviour of the distributed system under certain assumptions

Please sort it out. It doesn't matter what the discipline may be; the opening paragraph is supposed to be digestible by anyone looking up a quick cross-reference. Blitterbug (talk) 21:07, 3 October 2011 (UTC)

merging Thermal systems
The original Lumped capacitance model was isolated and need some more "merging edits" to be consistent with other "lumped systems" (ex. of the Mechanical-electrical analogies)... See also Isomorphism. --Krauss (talk) 08:13, 16 December 2014 (UTC)

Creation
(section moved from original)

I have created this article having noticed that this material was scattered about in several different places and it seemed to make sense to consolidate it. Also this article was on the list at Requested articles/Applied arts and sciences.

It may need some more work as this is really just a consolidation at this point.

Dhollm (talk) 10:19, 10 August 2010 (UTC)


 * Good job. I'm fixing it up and referencing it whenever such conditions are referenced. For example, I note with some trepidation that "Newton's law of cooling" (basically the solution for a subclass of lumped capacitance systems) is mentioned as "the" solution for convective heat transfer! It really has nothing to do with convective heat transfer per se, except that it often happens that it turns up when convection cooling is slow and the object cooled conducts heat internally well. So all the transient heat conduction cases where this model is applicable or not, need to be sorted out. The convection article has a much better approach to convective heat transfer than does the one on convective heat transfer!


 * But thanks-- it can all be dircted here, when needed. Newton's law of cooling should probably be directed here also, and I'll do that. S  B Harris 23:27, 5 November 2011 (UTC)

merging Theory
The original Lumped matter discipline was isolated and need some more "merging edits" to be consistent... --Krauss (talk) 08:21, 16 December 2014 (UTC)

Resistance table
I don't know enough about the math markup to be able to do this, but the listed expressions for radiation equivalence is only valid in the case of one surface being much greater than the other one. If somebody else can notate that, or show me how, I would appreciate it. W0lfie (talk) 19:30, 11 April 2017 (UTC)
 * See Help:Displaying a formula. SpinningSpark 00:00, 13 April 2017 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Lumped element model. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20051025110101/http://www.jat.co.kr/eda/saber/mpp.pdf to http://www.jat.co.kr/eda/saber/mpp.pdf

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 02:40, 9 January 2018 (UTC)