Talk:Magnetic storage

How does it work?
This needs a diagram. Show a recording head, magnetic fields, coils, gaps, vertical and horizontal domains. Explain the difference between analog and magnetic recording. What is tape bias? Got to talk about the physics, where the rubber meets the road. What causes noise on analog tapes? What's equalization? What happens when the bits get too close together on a disk or tape? --Wtshymanski (talk) 14:58, 9 August 2010 (UTC)

Look out for possible copyright violations in this article
This article has been found to be edited by students of the India Education Program project as part of their (still ongoing) course-work. Unfortunately, many of the edits in this program so far have been identified as plain copy-jobs from books and online resources and therefore had to be reverted. See the India Education Program talk page for details. In order to maintain the WP standards and policies, let's all have a careful eye on this and other related articles to ensure that no material violating copyrights remains in here. --Matthiaspaul (talk) 15:56, 31 October 2011 (UTC)

Shingled Magnetic Recording
Shingled Magnetic Recording is a redirect in this article, so this article should also explain Shingled Magnetic Recording. --MrBurns (talk) 13:10, 5 November 2013 (UTC)

Likewise, I've just ended up here after searching for Shingled Magnetic Recording, and there's no explanation. --Russell Newman (talk) 23:14, 6 May 2014 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified 2 one external links on Magnetic storage. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20090610070935/http://www.everspin.com/technology.html to http://www.everspin.com/technology.html
 * Added archive https://web.archive.org/web/20100312213800/http://history.sandiego.edu/GEN/recording/notes.html to http://history.sandiego.edu/gen/recording/notes.html

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at ).

Cheers.— InternetArchiveBot  (Report bug) 16:50, 16 July 2016 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Magnetic storage. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20120119111746/http://www.eetimes.com/news/latest/showArticle.jhtml?articleID=218000269 to http://www.eetimes.com/news/latest/showArticle.jhtml?articleID=218000269

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 06:16, 30 May 2017 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified one external link on Magnetic storage. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20110427022729/http://www.crocus-technology.com/pdf/BH%20GSA%20Article.pdf to http://www.crocus-technology.com/pdf/BH%20GSA%20Article.pdf

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 18:05, 12 January 2018 (UTC)

The design and technical sections ignore the techologies that do not involve mechanical motion
The design and Technical details sections are only relevant for half of the technologies mentioned in the History section. They are inappropriate for technologies that do not use mechanical mortion, e.g., Bubble memory, Core rope memory, Magnetic-core memory, Magnetic-rod memory, Thin-film memory, Transformer read-only storage, Twistor memory. Shmuel (Seymour J.) Metz Username:Chatul (talk) 16:29, 18 July 2019 (UTC)

Bit storage
The article states the bits are encoded in the magnetic polarity. They are not. They are recorded in the changes of polarities, which is quite different. That should be fixed.

CMR versus PMR
This is incorrect --> "Perpendicular magnetic recording (PMR), also known as conventional magnetic recording (CMR)"

In fact PMR describes the way that bits are recorded, ie perpendicularly. CMR and SMR describe the way that tracks are recorded, either conventionally (side by side with no overlap) or shingled (overlapped). Therefore a hard drive can be described as being both PMR and SMR, ie vertical bits on overlapping tracks. 203.59.50.114 (talk) 02:10, 20 July 2022 (UTC)

Uncited material in need of citations
I am moving the following uncited material here until it can be properly supported with inline citations of reliable, secondary sources, per WP:V, WP:NOR, WP:CS, WP:NOR, WP:IRS, WP:PSTS, et al. This diff shows where it was in the article. Nightscream (talk) 16:06, 27 August 2022 (UTC)

LEDE SECTION
Magnetic storage uses different patterns of magnetisation in a magnetizable material to store data and is a form of non-volatile memory. The information is accessed using one or more read/write heads.

Magnetic storage media, primarily hard disks, are widely used to store computer data as well as audio and video signals. In the field of computing, the term magnetic storage is preferred and in the field of audio and video production, the term magnetic recording is more commonly used. The distinction is less technical and more a matter of preference. Other examples of magnetic storage media include floppy disks, magnetic tape, and magnetic stripes on credit cards.

History
Smith had previously filed a patent in September, 1878 but found no opportunity to pursue the idea as his business was machine tools. The first publicly demonstrated (Paris Exposition of 1900) magnetic recorder was invented by Valdemar Poulsen in 1898. Poulsen's device recorded a signal on a wire wrapped around a drum. In 1928, Fritz Pfleumer developed the first magnetic tape recorder. Early magnetic storage devices were designed to record analog audio signals. Computers and now most audio and video magnetic storage devices record digital data.

In computers, magnetic storage was also used for primary storage in a form of magnetic drum, or core memory, core rope memory, thin film memory, twistor memory or bubble memory. Unlike modern computers, magnetic tape was also often used for secondary storage.

Design
Information is written to and read from the storage medium as it moves past devices called read-and-write heads that operate very close (often tens of nanometers) over the magnetic surface. The read-and-write head is used to detect and modify the magnetisation of the material immediately under it. There are two magnetic polarities, each of which is used to represent either 0 or 1.

The magnetic surface is conceptually divided into many small sub-micrometer-sized magnetic regions, referred to as magnetic domains, (although these are not magnetic domains in a rigorous physical sense), each of which has a mostly uniform magnetisation. Due to the polycrystalline nature of the magnetic material, each of these magnetic regions is composed of a few hundred magnetic grains. Magnetic grains are typically 10 nm in size and each form a single true magnetic domain. Each magnetic region in total forms a magnetic dipole which generates a magnetic field. In older hard disk drive (HDD) designs the regions were oriented horizontally and parallel to the disk surface, but beginning about 2005, the orientation was changed to perpendicular to allow for closer magnetic domain spacing.

For reliable storage of data, the recording material needs to resist self-demagnetisation, which occurs when the magnetic domains repel each other. Magnetic domains written too close together in a weakly magnetisable material will degrade over time due to rotation of the magnetic moment of one or more domains to cancel out these forces. The domains rotate sideways to a halfway position that weakens the readability of the domain and relieves the magnetic stresses.

The heads are kept from contacting the platter surface by the air that is extremely close to the platter; that air moves at or near the platter speed. The record and playback head are mounted on a block called a slider, and the surface next to the platter is shaped to keep it just barely out of contact. This forms a type of air bearing.

Digital recording
Instead of creating a magnetisation distribution in analog recording, digital recording only needs two stable magnetic states, which are the +Ms and -Ms on the hysteresis loop. Examples of digital recording are floppy disks and hard disk drives (HDDs). Digital recording has also been carried out on tapes. However, HDDs offer superior capacities at reasonable prices; at the time of writing (2020), consumer-grade HDDs offer data storage at about $0.03 per GB.

Magneto-optical recording
Magneto-optical recording writes/reads optically. When writing, the magnetic medium is heated locally by a laser, which induces a rapid decrease of coercive field. Then, a small magnetic field can be used to switch the magnetisation. The reading process is based on magneto-optical Kerr effect. The magnetic medium are typically amorphous R-Fe-Co thin film (R being a rare earth element). Magneto-optical recording is not very popular. One famous example is Minidisc developed by Sony.

Domain propagation memory
Domain propagation memory is also called bubble memory. The basic idea is to control domain wall motion in a magnetic medium that is free of microstructure. Bubble refers to a stable cylindrical domain. Data is then recorded by the presence/absence of a bubble domain. Domain propagation memory has high insensitivity to shock and vibration, so its application is usually in space and aeronautics.

Access method
Magnetic storage media can be classified as either sequential access memory or random access memory, although in some cases the distinction is not perfectly clear. The access time can be defined as the average time needed to gain access to stored records. In the case of magnetic wire, the read/write head only covers a very small part of the recording surface at any given time. Accessing different parts of the wire involves winding the wire forward or backward until the point of interest is found. The time to access this point depends on how far away it is from the starting point. The case of ferrite-core memory is the opposite. Every core location is immediately accessible at any given time.

Hard disks and modern linear serpentine tape drives do not precisely fit into either category. Both have many parallel tracks across the width of the media and the read/write heads take time to switch between tracks and to scan within tracks. Different spots on the storage media take different amounts of time to access. For a hard disk this time is typically less than 10 ms, but tapes might take as much as 100 s.

Coding schemes
Many magnetic disks internally use some form of run-length limited coding and partial-response maximum-likelihood.

Modern usage
, common uses of magnetic storage media are for computer data mass storage on hard disks and the recording of analog audio and video works on analog tape. Since much of audio and video production is moving to digital systems, the usage of hard disks is expected to increase at the expense of analog tape. Digital tape and tape libraries are popular for the high capacity data storage of archives and backups. Floppy disks see some marginal usage, particularly in dealing with older computer systems and software. Magnetic storage is also widely used in some specific applications, such as bank cheques (MICR) and credit/debit cards (mag stripes).

India Education Program course assignment
This article was the subject of an educational assignment at Department of Electronics and Telecommunication, College of Engineering, Pune, India supported by Wikipedia Ambassadors through the India Education Program&#32;during the 2011 Q3 term.&#32;Further details are available on the course page.

The above message was substituted from by PrimeBOT (talk) on 20:08, 1 February 2023 (UTC)