Talk:Manumatic

article start
The "Manumatic" (copyrighted by Borg and Beck) transmission was offered on several British cars in 1957-59. The system was based upon a dual clutch arrangement where the regular clutch was activated by a vacuum mechanism controlled by an electric control box and a second, centrifical clutch was co-located in the clutch housing. An electric switch on the steering coulmn gear shift activated the electric control box which in turn activated the vacuum mechanism (consisting of a vacuum tank and a vacuum cylinder). There were only two pedals on the floor-the brake and the gas. To start off, you grabbed the gearshift lever, activating the your a wanker gearchange lever switch, which inturn activated the controlbox which then activated the vacuum cylinder to disengage the clutch. You then put the gearshift lever in the usual place for first gear (or reverse if that is the direction you wanted to go). When you let go of the shift lever, the vacuum mechanism would reengage the clutch. However, the car did not move as the centrifical clutch was not yet engaged. Appling power (the gas) increased the speed of the engine and caused the centrifigal clutch to slowly engage and away you went. At least until you needed to change gears again. When touched the gearshift lever, intending to shift into second gear, the vacuum mechanism again disengaged the clutch. Once the transmission was in second, you could let go of the gear shift and vacuum mechanism would release the clutch.... but again you would need to apply power until the centrifical clutch engaged. You did this through all four gears. An advantage of the centrifical clutch is that the engine had to be spinning faster then the transmission in order for the centrifical clutch to engage-eliminating rough engagements. Needless to say, this was a rather complicated mechanism, requiring special parts to keep serviced. However, it did allow “one foot” driving. This transmission was only used in England for a few years at the end of the fifties on cars of about 1 1/2 liter capacity (Morris Oxford, Hillman Minx). In the Rootes cars (Hillman and Singer) it was replaced by the Easidrive fully automatic transmission in 1960.
 * I have copied the above text (which was not written by me but which I believe to be accurate) to the main body of the article. Biscuittin 12:16, 12 June 2007 (UTC)
 * "...activating the your a wanker gearchange lever switch..." yeah very accurate. Soulman (talk) 11:27, 18 June 2013 (UTC)

Manumatic transmission
Based on the originally posted information, and the material referenced, I have edited and improved the grammar and style of this article over a period of time. —Preceding unsigned comment added by 222.152.83.235 (talk) 09:38, 1 April 2009 (UTC)

Honda IShift / I-Shift?
This article refers to Honda "Ishift" - is this the same as the recent "Honda I-Shift", which is NOT a manumatic but a semi-automatic, and has its own Wikipedia article? If so, then this is incorrect and needs to be removed from the article, together with the redirect of "Ishift" to "Manumatic". 86.185.46.69 (talk) 12:34, 11 September 2011 (UTC)

Confusion in article
The article is a bit confusing. It first defines manumatic as having a torque converter, then, in the "Two pedal operation" section, it describes a system with a traditional clutch plate. Should we stick by the first definition? If so, several tradenames have to be removed from the list.

Namely, provided I'm not missing some: Alfa Romeo Selespeed, Fiat Dualogic, Maserati Duoselect, Smart Softip. All those are robotized gearboxes, with traditional helical gears and clutch plate.

--Aprovera (talk) 13:47, 28 March 2012 (UTC)

It looks to me like the "Two pedal operation" section should be moved/merged to Saxomat? Please advise.

--Aprovera (talk) 08:10, 30 March 2012 (UTC)

Merge to Semi-automatic transmission
Merged to Semi-automatic transmission ? — Preceding unsigned comment added by 94.99.230.177 (talk) 10:58, 20 March 2018 (UTC)
 * Oppose Isn't Manumatic supposed to be favouring automatic with hints of manual, whilst semi-automatic favours manual? — Preceding unsigned comment added by TheDragonFire300 (talk • contribs) 20 March 2018 11:35 (UTC)
 * Oppose: Manumatic is an automatic transmission (with torque converter) with manual operation available. Semi-auto gearbox or electrohydraulic manual transmission is a manual transmission (with clutch) with automated robotised operation. If anything semi-auto and electrohydraulic should be merged as they both point to the same versions of cars that utilises them.YBSOne (talk) 10:24, 27 November 2018 (UTC)
 * Comment A detailed rationale would be necessary for a proper discussion to commence. Eagleash (talk) 11:50, 20 March 2018 (UTC)
 * Support The difference is that Manumatic uses torque converter and can be switched to sport mode (manual with paddle shifters) while semi-automatic uses a clutch which is hydraulically actuated by a computer. Both of them use a computer and actuators the difference can be explained in a section in the destination.94.99.230.177 (talk) 12:17, 20 March 2018 (UTC)