Talk:Multi-valve

Untitled
what's the record for most valves per cylinder? —Preceding unsigned comment added by 18.228.1.49 (talk) 07:53, 9 January 2008 (UTC)

So you have deleted history part alltogether, that is good, because the multivalve history part was wrong.

First 4 valve double overhead camshaft engine was Peugeot grand prix car (raced and won in Indianapolis 1913). First 5 valve engine was also in Peugeot grand prix car (raced in early 20s), this engine had 3 overhead camshafts.

Above are listed in engine technology literature.

Still it is hilarous to see that '3 or 4 valve pushrod blaa blaa blaa'... yet the first 4 valve pushrod engine was Ford based, developed by a small American company in late 80's.

Guys, know your facts... afterall Wikipedia credibility is in line here...

Sad that no mention is made of the Miller engines developed around 1915 / DOHC, 4 valve based largely on the Peugeot GP motor / Miller was the origin of the famous 'Offy' and important to at least racing history — Preceding unsigned comment added by 2600:8800:7100:7B:8442:ED2C:2874:67BC (talk) 21:05, 13 April 2016 (UTC)

Lucky 7
Didn't Suzuki develop the 1st 7v moto engine? (With oval pistons.)  TREKphiler   any time you're ready, Uhura  21:31, 28 October 2010 (UTC)

Parallel valve stems
I have undone your reversion on parallel valve stems. I think it is incorrect to say that parallel valve stems are "rare" in four-valve heads. Particularly in car engines, parallel stems are the norm. A notable exemption (that perhaps proves the rule) is the "RFVC" (Radial Four Valve Combustion) head used (inter alia) in the Honda XR series single-cylinder bikes. But the RFVC layout was not easily adaptable to multi-cylinder engines. And the cost of valve-gear complication was one of the reasons that Yamaha fell out of love with five-valve heads. Arrivisto (talk) 11:09, 27 April 2014 (UTC)

4 valves parallel stems, >4 valves angled stems
Recent additions put forward the thesis that <=4 valve heads can use parallel valve stems, whilst >4 valves must use angled valve stems. This is both incorrect, misleading and of course unsourced. Parallel valve stems are unusual as, first and foremost, they lead to poorly placed valve heads and an inefficient combustion chamber shape. Secondly, >4 valve heads have (subject to the same proviso) used parallel valves. When such engines first appeared, as large capacity high-speed engines, such as 1930s airship engines and 1950s high speed locomotive engines, parallel stems were not uncommon for those 5 & 6 valve engines.

The statements as they stand are uncited. The implication of the statements, that parallel valve stems is dependent on the number of valves (rather than being a compromise for simplifying machining at the cost of a less efficient chamber design) is additionally misleading. Andy Dingley (talk) 11:27, 27 April 2014 (UTC)


 * The edits you reverted should be taken in context: they were a comparison between four-valve and five-valve heads, and were made partly to show why (implicitly, in cars and motorcycles) the five-valve head is now uncommon. Ignoring the mathematical symbols, you say the edits, "put forward the thesis that 4-valve heads can use parallel valve stems, whilst 5-valves must use angled valve stems", but that is a misreading. You make the point that the edits are uncited (true, as yet): so why not add a citation needed rather than instant reversion?  You say, possibly wrongly, that parallel stems are "rare" in four-valve engines, but provide no evidence.  You say that parallel stems alead to poorly placed valve heads and an inefficient combustion chamber shape, but, again, provide no evidence.  To then allege that the reverted edits were "misleading" is unjustifiable semantics.  Arrivisto (talk) 12:03, 27 April 2014 (UTC)

External links modified (February 2018)
Hello fellow Wikipedians,

I have just modified 2 external links on Multi-valve. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://www.webcitation.org/6HoPOlzah?url=http://www.europeancarweb.com/features/0209ec_twin_cam_analysis/ to http://www.europeancarweb.com/features/0209ec_twin_cam_analysis/index.html
 * Added archive https://web.archive.org/web/20161221130406/http://www.enginehistory.org/German/Jumo213/Jumo213.shtml to http://www.enginehistory.org/German/Jumo213/Jumo213.shtml

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 02:27, 8 February 2018 (UTC)

Power per cubic inch
I notice this article has power per cubic inch, this does not follow the guidelines in the Wikipedia Manual of Style regarding Units to display, completely missing is the power per litre in either horsepower or kilowatts. Does any country presently use cubic inches for engine capacity? Even the USA now uses liters on the manufacturer web page. Avi8tor (talk) 07:33, 18 April 2021 (UTC)