Talk:Organ printing

Wiki Education Foundation-supported course assignment
This article was the subject of a Wiki Education Foundation-supported course assignment, between 13 January 2020 and 30 April 2020. Further details are available on the course page. Student editor(s): Tayloj11, Jennifer.makarevich, Scola.lisa, ClareBowyer, Caroline.Halburian.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 01:57, 18 January 2022 (UTC)

Wiki Education Foundation-supported course assignment
This article was the subject of a Wiki Education Foundation-supported course assignment, between 1 October 2020 and 16 December 2020. Further details are available on the course page. Student editor(s): Woohan0819.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 01:57, 18 January 2022 (UTC)

Wiki Education Foundation-supported course assignment
This article is or was the subject of a Wiki Education Foundation-supported course assignment. Further details are available on the course page. Student editor(s): Lawallach.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 05:49, 17 January 2022 (UTC)

Copyright
I've got permission requests for copyrighted images hanging out in many a inbox. We'll have some posted, soon Ieopo 19:48, 14 November 2005 (UTC)

Confusion
"The gel is heat sensitive - solidifying at 32 degrees celsius and liquifying at 20 degrees." I'm just wonder if it's correct that it solidifies at a higher temperature than it liquifies. —Preceding unsigned comment added by Applejaxs (talk • contribs) 20:09, 30 September 2007 (UTC)

Peer Review Suggestions
I really like the information within this article, it covers a wide variety of areas and I know that I learned a lot by reading it.

Although a good bit of information, the third paragraph in the lead of this article is very specific and may fit better under the “3D Printing Techniques” or “Printing Materials” section, it is also lacking a citation.

The “Ethical Debate” section provides some very good points, yet argues points of view that are not neutral to wikipedia users.

The flow of the article is great for the most part, but may improve by putting the “Printing Materials” section before the “3D Printing Techniques” section.

Overall lots of good, balanced information within this article! Harejosi (talk) 00:06, 11 April 2017 (UTC)

Edits for Class Project
Hello all,

Over the next 2 months, my team and I will be updating the sections and content of this page. Specifically, we will be editing the Introduction and History sections. We plan to then combine Techniques and Printing materials into a general printing principles section. We will also add Applications, Legal and Safety, Impact, and Challenges sections. We also plan to update the figures to better explain the new and old sections. More details will be posted as we begin editing over the next week. If anyone has any suggestions or questions regarding our edits, please feel free to reach out!

Thanks! Scola.lisa (talk) 01:11, 5 March 2020 (UTC)


 * Looks good MTLE4470 EFP (talk) 18:40, 2 April 2020 (UTC)

Outline for Planned Edits
My team and I have proposed the following sections that will be added into the finalized version of the Organ printing Wikipedia page. The final article will be published on April 30, 2020. Please feel free to respond with any feedback regarding the information outlined below. Sections Below is the link to our group sandbox where we will include drafts of our planned edits: https://en.wikipedia.org/w/index.php?title=User:Tayloj11/group_sandbox&action=edit Jennifer.makarevich (talk) 18:59, 2 April 2020 (UTC)
 * Introduction
 * 1) Define organ printing
 * 2) Introduce applications
 * History
 * 1) Major milestones
 * 3D Printing General Principles
 * 1) Techniques
 * 2) Printing Materials
 * 3) Processes and printers
 * Applications
 * 1) Transplant Waitlist
 * 2) Practice for surgeons in training
 * 3) Pharmaceutical Research
 * 4) Organ on a chip
 * 5) Heart on a chip
 * Legal and Safety
 * 1) Updated legislation for correct usage
 * 2) FDA regulations
 * 3) Ethical Considerations
 * Impact
 * 1) Aid organ transplant shortage
 * 2) Personalization of organs
 * 3) Creating artificial leather to eliminate need for animal testing in cosmetics
 * Challenges
 * 1) Vascularization
 * 2) Replicating organ function
 * 3) Printing process of organs
 * 4) Recreating the hierarchical structures of organs

Edits for Existing Intro and History Sections
Hi Everyone,

Over the last few months my team and I have been working on updating this page. I have been working on the Intro and History sections which currently exist on the page. For the Intro, I plan to replace the existing section with the Intro present on our group sandbox (https://en.wikipedia.org/wiki/User:Tayloj11/group_sandbox). My goal was to clearly explain the definition of organ printing and how it is done, as well as suggest some industries where it can be used. I will also be replacing the existing image with 2 new images. For the History section, I have added some earlier history that I will merge with some of the information that is present on Thomas Boland. I also plan to remove the last two paragraphs that discuss the use of organ printing in organ transplantation as this will be discussed in our new Applications section later on. Additionally, I will be adding some more recent history in the field. Feel free to check the link above for more specifics.

I plan to move this content from our sandbox as well as the new Applications section to the current page in the next couple days. In the mean time please feel free to reach out with any questions/comments/suggestions!

Tayloj11 (talk) 04:23, 28 April 2020 (UTC)

Adding the Legal and Safety Section
Hello! I will be adding a new section focused on the Legal and Safety aspects about organ printing. My team and I will be adding our respective sections over the next couple days and will have the entire article finalized by May 2nd. Thanks Scola.lisa (talk) 22:39, 28 April 2020 (UTC)

Additional Content to the Printing Materials and 3D Printing Techniques Sections
Hello Everyone!

I will be adding new content to the printing materials section, while also combining the old content with the new information I have gathered. Also, I will be adding content to the 3D printing techniques section. Please feel free to reach out to me regarding any questions or concerns. — Preceding unsigned comment added by Caroline.Halburian (talk • contribs) 14:02, 29 April 2020 (UTC)

Adding Application, Printer and Technique Information
I will be uploading information to the Printing Technique section and adding sections about the types of printers and applications. Feel free to message with any questions or concerns! Jennifer.makarevich (talk) 02:34, 30 April 2020 (UTC)

Adding Content to Applications Section
Hello Everyone,

I will be adding information on pharmaceutical research to the applications section. — Preceding unsigned comment added by Caroline.Halburian (talk • contribs) 14:57, 30 April 2020 (UTC)

Article's Question
If there are any current challenges of organ printing, what are those? And if it can be solved, how could you do it. — Preceding unsigned comment added by Woohan0819 (talk • contribs) 02:36, 8 December 2020 (UTC)

Shit
Shit 171.78.190.19 (talk) 14:21, 1 December 2021 (UTC)

Tone and content
This page is a bit of a mess. It feels more like an essay or thesis paper written by one person. There is so much editorializing (the 'Organ Donation' section is a good example) and overly-technical content that the page is both pretty biased and inaccessible in its current state. I do not know that much about the topic, so I'm not really going to contribute much, but I think that this page could use an overhaul. Mystagen (talk) 18:04, 25 July 2023 (UTC)