Talk:Wind turbine design

Level of detail of each section
Does anyone else think that this page attempts to cover too many topics? I have noticed that the aerodynamics section contains a link to an article which explains the aerodynamics of wind turbines much better. However, the same cannot be said of other sections such as power control, generators, including connection to the electric grid, etc. Surely some of these pages are worthy of pages in their own right no?

Smilesgiles89 (talk) 17:26, 17 April 2013 (UTC)

Among other issues, yes. Especially critical since in some sections the formulation of information is.. I'd call it haphazard. Written in a way not really meant to be understood; full of loose ends requiring additional foreknowledge. A huge pretense of complexity; and while I'm no enemy of technical terms, the more obscure ones should either be linked, explained or not used at all on a general encyclopedia. I believe this article pretty much has to be rewritten piece by piece. 79.223.177.233 (talk) 01:39, 9 July 2014 (UTC)

Connection to the electric grid
The article does not make any mention of the dangers of employing a DFIG topology. For one, a DFIG draws reactive power from the grid. In light of this, a DFIG wind turbin can contribute to instability in a transmission system. — Preceding unsigned comment added by Smilesgiles89 (talk • contribs) 17:19, 17 April 2013 (UTC) Smilesgiles89 (talk) 17:26, 17 April 2013 (UTC)

Vortex Generators
Vortex generators and micro-tabs should not be confused. I replaced the microtab references with vortex generators in the "Stall" section of the article. Micro tabs are serrated gurney flaps and not vortex generators. georgepehli (talk) 09:52, 10 February 2010 (UTC)

Stall section needs major re-writing!
I believe that the stall description is very poor and generally inaccurate. Sections like this one: Stalling is simple because it can be made to happen passively (it increases automatically when the winds speed up), but it increases the cross-section of the blade face-on to the wind, and thus the ordinary drag should be explained better and in a more accurate way.

Also, what vortex generators do, is that they induce vorticity to the boundary layer thus improving the BL mixing and eventually allow the BL to "stick" to the wall (i.e. airfoil or wind turbine blade) withstanding more adverse pressure gradients. The whole statement: ''Vortex generators may be used to control the lift characteristics of the blade. The VGs are placed on the airfoil to enhance the lift if they are placed on the lower (flatter) surface or limit the maximum lift if placed on the upper (higher camber) surface'' is completely wrong. First of all these is no "flat" airfoil surface, the terminology is Pressure Side and Suction Side. Then, the installation of VGs on the Pressure Side does NOT increase lift. What usually happens is that trip-stripes (i.e. zig zag tapes) are installed around mid-chord at the Pressure Side in order to fix the Laminar-Turbulent transition location and allow the tripped (i.e. turbulent) boundary layer to attach to the rear part of the pressure side of the airfoil. If this part is cambered (i.e. S shaped trailing edge) then the fact that the BL is attached will lead to a lift increase due to the trailing edge camber.

Regarding the suction side I do not see how the VGs would "limit the maximum lift". What they would do is generally control the stall and the post-stall behavior of the airfoil.

Finally the citation provided by the author of that part does NOT state any of the above (false) statements. georgepehli (talk) 09:52, 10 February 2010 (UTC)

Blade Materials Possible Fallacy
In the section on blade materials there is a piece which states : "One of the most important goals when designing larger blade systems is to keep blade weight under control. Since gravity scales as the cube of the turbine radius, loading due to gravity becomes a constraining design factor for systems with larger blades.[5]"

Firstly, I do not think the term "gravity" is correct here. Gravity will not increase or decrease significantly depending on how big wind turbine blades are, it's weight may, yes but it's gravity.... I don't think so. Also, there is mention that it will increase with the cube of the radius however the source cited does not confirm or deny this. —Preceding unsigned comment added by Brokengun (talk • contribs) 01:33, 21 December 2009 (UTC)

Can the dynamic braking resistor described in this article be at least partly replaced with ultracapacitors? That sounds like it could keep the energy from being wasted as heat and instead captured and trickled off slowly, still providing the needed braking and giving a boost to the turbine's efficiency and output. Only when the capacitors were topped out (and a great deal of capacitance could be used if wanted) would a resistor be used. Or am I misunderstanding how this works and this is not technically possible?

Wind turbine economics
"Due to the energy required to manufacture, transport, and erect the components of wind turbines it is debated if over the life of the turbine this energy will be recaptured.

Also utility companies rely on government subsidies to offset the cost of building wind farms which are two to three times the cost of equivalent capacity produced by coal fired units. After the subsidies run out the wind facility is normally sold to another utlity who begins to draw the subsidies once more."

These assertions don't seem to be relevant, supported or even referenced further within the article - what utility companies? what government? How does this relate to the topic of wind turbine design? Donquixote2u (talk) 02:08, 13 September 2009 (UTC)

Error in Indiana data
Part of the current article says "Indiana had been rated as having a wind capacity of 30 MW, but by raising the expected turbine height from 50 m to 70 m, the wind capacity estimate was raised to 40,000 MW, and could be double that at 100 m.[6]". The citation does indeed say this but I have to assume that something is wrong here. Obviously, raising the turbine height from 50m to 70m can't give a 1000 fold increase in power. The 30MW figure might be the states current output capacity (although NRELs 2007 report doesn't even provide a figure for Indiana). The 40,000 MW figure might represent a theoretical maximum output capacity but the citation doesn't provide a link to the actual NREL data. Either way, it is at best very confusing and at worst completely wrong.

Emphasis on larger wind turbines
Looking through the article it seems to only include the megawatt class turbines and not anything about kilowatt or even watt class turbines. Could someone try putting in more material on smaller turbines? Aicchalmers 14:46, 2 September 2007 (UTC)

Durability
The "Materials" section of the article briefly discusses materials used for modern wind turbine blades. However the durability (in years) or needed maintenance of the blades, the (steel) tower, or the internal parts is not discussed, but this information would be most welcome. (Any evaluation or cited experiences of the durability/maintenance would be turbine-type specific, so in my understanding this page would be the right place, instead of the more general "Wind turbine" page.) (85.156.172.166 (talk) 20:30, 7 March 2008 (UTC))

More in-depth version of article at powerpedia
See The updated article of wikipedia; more information is available here. Perhaps it may be copied to Wikipedia ?

Thanks. 87.64.203.222 (talk) 16:47, 4 April 2008 (UTC)

Rotation control
"High efficiency 3-blade-turbines have tip speed/wind speed ratios of 6 to 7" is ambiguous: does the ratio range from 6.0 to 7.0 or is it 6/7? —Preceding unsigned comment added by 71.205.58.127 (talk) 04:24, 4 July 2008 (UTC)
 * I assume it means between 6:1 and 7:1. Rocketmagnet (talk) 22:32, 19 May 2009 (UTC)

A dumb question (or two)
This keeps coming up on the Science Refdesk, so I'm going to try to figure it out.

If a three-blade turbine is good, why isn't a six-blade turbine twice as good? Is the only point of a wind turbine to turn the generator at a certain speed? Doesn't the electrical load on the turbine slow the blades down? If that was the case, one would think that twice as many blades would push the electrons through twice as hard (as it were), i.e. you could put twice the load on the generator.

I'm sure I'm missing something here, but it's not completely clear from reading the article so I appreciate any explanation. Thanks! Franamax (talk) 06:15, 22 July 2008 (UTC)
 * Your first question is in Wind_turbine_design "Increasing the number of blades from one to two yields a six percent increase in aerodynamic efficiency, whereas increasing the blade count from two to three yields only an additional three percent in efficiency. Further increasing the blade count yields minimal improvements in aerodynamic efficiency and sacrifices too much in blade stiffness as the blades become thinner." Mion (talk) 06:29, 22 July 2008 (UTC)
 * Yes, that's where my dumb questions multiply.
 * What does that mean, a six percent increase in aerodynamic efficiency - 6% of what? Where is "aerodynamic efficiency" defined?
 * And more, sacrifices too much in blade stiffness as the blades become thinner - I told you to add more blades, I never asked you to make them thinner. What happens when they stay thick?
 * And what does thick/thin refer to - length of the blade (trailing not radial)? profile presented to the wind? aerodynamic thickness of the blade itself?
 * Thanks for the quick response so far! Franamax (talk) 12:46, 22 July 2008 (UTC)
 * here Drag (physics) you improve the aerodynamic efficiency by lessening the friction forces (mostly), and looking at your other question, this was my last answer on this page. Cheers Mion (talk) 13:01, 22 July 2008 (UTC)
 * OK, so where do the friction forces lessen? Does that mean there is better balance on the central bearings?
 * And I'm not sure what you mean by my last answer on this page - an archived answer? Franamax (talk) 13:10, 22 July 2008 (UTC)
 * "I told you to add", i'm not your dog, so please mind your language. Mion (talk) 13:20, 22 July 2008 (UTC)
 * Ohh, finally I get it - you're taking things personally. No, that was a figure of speech, a rhetorical formulation or what have you. Not a personal comment to you, not at all. The comments were actually directed to the disembodied voice of the article text (and if you wrote that text, then sorry again I guess :), asking the article to make itself more clear. I apologize for any misunderstanding, I'll plead the fact it took me this long to figure it out as evidence of my sincerity. Sorry :)
 * I try to approach technical questions directly, it's often the best way to get direct answers. Hopefully someone will tackle the questions because it's just not clear to me. Thanks. Franamax (talk) 19:13, 22 July 2008 (UTC)
 * he, no hard feelings, Cheers Mion (talk) 20:07, 22 July 2008 (UTC)


 * I must agree that I don't feel that this article has answered the question fully: Why not have 6 blades? Indeed, small turbines seem to have more blades.  Also, the bit about aerodynamic efficiency could be explained a little better I think. What exactly is the input power in this case? Thanks Rocketmagnet (talk) 22:38, 19 May 2009 (UTC)


 * The 3rd paragraph in the Blade Count section especially needs more clarification. Quantalume Wanderer (talk) 04:26, 5 January 2010 (UTC)

Reference on the increased aerodynamic efficiency
It would be a good idea to have a reference for the increase in the aerodynamical efficincy of the wind turbine with the increasing number of blades —Preceding unsigned comment added by 193.190.163.52 (talk) 09:29, 19 August 2008 (UTC)
 * I definitely agree, as far as I am concerned those numbers are made up CombatWombat42 (talk) 15:42, 8 April 2013 (UTC)
 * It seems to be a popular opinion among those who write about aerodynamics; I put the first ref I found into the article. --Wtshymanski (talk) 16:37, 8 April 2013 (UTC)

How is the electricity from the head mounted Generator transmitted to the tower as the head yaws?
Surely if it was hard wired the wires would tangle? Some sort of slip ring to allow the transfer of power must exist, but not mentioned in the article. How about transferring the rotation of the power shaft through a crown gear - ie rotate 90 so as to be inline with the tower. then mount the genny on the tower vertically, and wire it up? —Preceding unsigned comment added by 82.30.126.139 (talk) 13:56, 24 February 2009 (UTC)


 * When the turbine controller detects that the power cables have been twisted by three rotations, it shuts the machine down and untwists them. --24.65.122.222 (talk) 02:50, 2 March 2009 (UTC)Wally Flint

The generator section is unclear
The generator explanation changes back and forth from asynchronous to synchronous machines and merges explanations from several different technologies. We should clearly define the different methods. —Preceding unsigned comment added by 74.98.33.199 (talk) 20:50, 13 June 2009 (UTC)

Induction Generator
This is NOT correct:

"Older style wind generators rotate at a constant speed, to match power line frequency, which allowed the use of less costly induction generators."

As odd as this might seem, a Tesla motor/generator (so-called squirrel cage rotor) does not need to run at a constant speed. It does need to run at a narrow speed range to function as a generator. It has a synchronous speed (ω) which is a function of the AC frequency (f) and the number of poles (n): ω = 120f/n. When used as a motor, it runs at less than that speed. The difference is usually called slip. As slip increases, the motor will produce more and more torque till the maximum is reached. If connected to a load, the motor will then stall. When used as a generator, it must be driven at a speed greater than the synchronous speed. As with use as a motor (but in reverse), the power produced increases as the slip increases until it reaches a peak. If that slip rate is exceed, the generator will produce less power. If slip continues to increase, a point will be reached where no power is produced and if that slip is exceeded, it will start absorbing power from the grid.

Tyrerj (talk) 22:38, 31 July 2010 (UTC)

Image
Can someone take over the picture at http://express.howstuffworks.com/gif/wind-power-horizontal.gif for the construction and design section ? Upload at wikimedia commons and show image here —Preceding unsigned comment added by 91.176.215.15 (talk) 10:49, 12 September 2009 (UTC)


 * No, because it is copyrighted, and belongs to the website... - Adolphus79 (talk) 13:08, 12 September 2009 (UTC)


 * I already took over the image myself, legally. Perhaps that the EERE_Illust_large_image may be imbedded to the image; the image I draw thus being the larger whole, and the with the EERE image as magnification of the head of the turbine (as it contains more info). The large picture has added info as it mentions the nacelle, rotor blades, rotor hub and transformer. See

91.182.191.178 (talk) 17:04, 12 September 2009 (UTC)

Image 2
Added this image, needs CGI'ing dough

Blade Shape
My 81-yr old mom asks a very elementary and important question, "What was wrong with the 4-arm dutch windmills of the 1800's ?? Why do modern wind turbines have such a different shape?" We should try to address this question early in the subsection about blade shape.

Also, from a cursory reading of the article, I cannot figure out what are the primary, secondary, and tertiary design criteria for a windmill blade design. Thus, this article fails to address a fundamental question about turbine design. For example, what's more important to efficient power generation, torque (which probably implies large blades), blade speed (which probably implies small blades), or availability (which probably implies lowering the stall windspeed, and thus blade mass and generator resistance and having variable pitch, so the turbine can generate power all the time)? SystemBuilder (talk) 18:55, 27 February 2010 (UTC)

Qn: mathematical analysis of the cyclic stresses in the blade root while rotating
Dear All,

When wind turbine rotor rotates it's blades especially blade roots undergo cyclic stresses. These stresses are due to gravitation forces and inertial forces.

Could any body of you explain me how these cyclic forces vary? I am interested to know the basic mechanics of these forces for example what would be the stress level in a blade root when the blade is perpendicular to group (pointing towards ground or sky), or the stress level when a blade is horizontal etc....(I am not much interested in Aerodynamics forces, since for steady mean wind flow they are constant)

Apart from basic mechanics of these stresses I would also like to go in the details of mathematical analysis of this phenomenon. So could you please suggest me some good reference book, lecture notes or any other written material.

thanks a lot in advance,

regards, Milind. —Preceding unsigned comment added by Milindashokshende (talk • contribs) 14:08, 26 May 2010 (UTC) This is terrible. This has nothing to do with wind turbines.

A turbine, by definition, is an exchange of momentum device. This whole article is about devices that operate on Bernoulli's Principle - not exchange of momentum.

This article is about "Wind Thingys." Because no one has come up with a neat sounding name for a device that operates on Bernoulli's principle is no excuse to gloom on to the word turbine.

This is improper

Ecarecar (talk) 20:36, 30 July 2011 (UTC)

ARTICLE has focus challenge per title
The title would invite consideration of design of any type of wind turbine, not just the towered HAWT. VAWT and other types ...belt, airborne are neglected. So, the sentence :"This article covers the design of horizontal axis wind turbines (HAWT) since the majority of commercial turbines use this design" is POV on "commercial" and does not count well, as VAWT and other sorts have a count that might be more than the count of the HAWTs.
 * WP:Notability and WP:SPLIT applies here. This article already has a reasonable size, and additions about VAWT, small or non-commercial types could be mentioned here but is best expanded upon in the relevant articles Unconventional wind turbines, Vertical axis wind turbine, Darrieus wind turbine, Savonius wind turbine, Small wind turbine and the like. The vast majority of wind energy production is made from large grid connected commercial HAWTs (as per  and maybe  ), they happen to be commercial because that is what is feasible. As for a non-commercial wind turbine, see  free to copy I guess, but so far feasibility seem to overwhelmingly prefer commercial solutions. TGCP (talk) 13:18, 18 December 2010 (UTC)

Wind Turbine Noise
I would question the statement in the current version (May 9) that the noise varies with the 5th power of the tip speed. If that were true the Vestas V47 (229 fps at nominal rotational speed) would be noisier than the Vestas V82 (202 fps at nominal rotational speed). There seems to be broad agreement that the reverse is true. —Preceding unsigned comment added by Carlfoss (talk • contribs) 22:43, 9 May 2011 (UTC)

Why are wide blades good for fans, but not wind turbines?
If your average house fan has wide fan blades that are designed to *efficiently move air*, then why won't that same basic blade design also be *efficiently moved by air* when applied to a wind turbine?

How can you extract the majority of energy in a circular field of wind by having narrow blades that occupy only a small fraction of that swept-area circular field?

Do water turbines have blades that only expose themselves to 10% or so of the total circular area of water rushing down a penstock water pipe? — Preceding unsigned comment added by 64.231.94.216 (talk) 21:46, 20 July 2011 (UTC)
 * I still don't know the answer to this one and I've been intermittently looking for it for some time. The fluid dynamics explanations I've read so far talk about the significance of the "chord" (the width of the blades), but I haven't found an explanation I understand well enough to paraphrase here. --Wtshymanski (talk) 01:13, 6 September 2011 (UTC)
 * It comes down to aerodynamics. "The total blade area as a fraction of the total swept disc area is called the solidity, and aerodynamically there is an optimum solidity for a given tip speed; the higher the number of blades, the narrower each one must be. In practice the optimum solidity is low (only a few percent) which means that even with only three blades, each one must be very narrow." I found the comments here enlightening too. --Avenue (talk) 04:38, 6 September 2011 (UTC)
 * I suppose what the original question was asking and what I don't yet understand either is why the optimums seem to be different for fans vs. turbines; now, a household fan operates in a vastly different way than a wind turbine, but it would be good to have some comprehension as to why the answers are different for fan blades and turbine blades. Though I suspect no household fan blade has ever been optimized for aerodynamic performance! --Wtshymanski (talk) 14:12, 6 September 2011 (UTC)
 * Yes, I gather most household fans are too compact and slow (for good reasons) to be aerodynamically optimal. Ceiling fans might be the most similar to wind turbines. Efficiency can be more critical for industrial fans, but a wide range of designs are used there, and I don't know what they're all good for. ---Avenue (talk) 16:27, 6 September 2011 (UTC)
 * Aspect ratio (wing) (length/Chord) is important for lift-to-drag ratio; sailplanes are the most efficient. Blade design could elaborate on this. Power direction also means something, as much more wind speed (and power per area) can be transmitted from Propeller (aircraft) to air than from air to rotor, affecting tip speed and therefore aspect ratio. Fan thrust depends on blade area, but inline references for this is not found in the propeller article. TGCP (talk) 19:47, 30 April 2012 (UTC)

Constant speed turbines
Does anyone know how the turbines work which rotate at a constant speed irrespective of the wind speed? See for example this one http://www.endurancewindpower.com/wp-content/uploads/2010/08/E-3120-Product-Brochure-NA-20-Feb-2012-Webready.pdf which rotates at a constant 42 rpm. If they do, it would be worth adding to the article Drkirkby (talk) 04:09, 11 March 2012 (UTC)
 * That would be true of machines with synchronous or induction generators; they regulate power into the grid just like a hydro turbine running at fixed speed, by adjusting their blade pitch angle to maintain the speed constant. If we don't explain this in the article, we should. --Wtshymanski (talk) 18:02, 11 March 2012 (UTC)


 * While adjusting the blade pitch is a big part of it, I think there's another effect at work.
 * My understanding is that most electrical power produced on earth, including wind turbines, is generated by induction generators.
 * My understanding is that many (most?) so-called "constant speed" turbines connect the induction generator directly up to the grid, and their actual operating RPM (and power produced) varies slightly with the wind speed.
 * If the power-generating range was 40 RPM (synchronous speed, zero-torque, zero power) to 44 RPM (maximum torque, breakdown torque, max power), I suspect it would appear to be constant-RPM to the casual observer, and it may be reasonable to call it a "42 RPM turbine". --DavidCary (talk) 19:23, 19 March 2014 (UTC)
 * You've been misinformed. Most energy is provided to the grid by synchronous machines, whose speed varies only in proportion to grid frequency (once synchronized). Induction machines are normaly smaller units, where the simplicity of control beats the efficiency loss. Variable-speed wind turbines vary by more than 10% of their top speed so that they can collect more energy at the lower end of wind speed range. --Wtshymanski (talk) 19:52, 19 March 2014 (UTC)


 * You may be right. My understanding is that practically all wind turbines are in one of those 3 types -- variable-speed (so they generate power at the mains frequency at any RPM), synchronous (as long as they are generating power, they are always spinning at some fixed synchronous RPM related to the mains power), induction directly connected to mains (they generate power only when they are spinning faster than their synchronous RPM). My understanding is that the induction-type is the only one of the 3 where it makes sense to try to maintain a fixed speed adjusting the blade pitch, which is what I thought we were talking about. --DavidCary (talk) 21:58, 19 March 2014 (UTC)
 * Well, every type of large turbine needs pitch control - a synchronous generator (now rare) msut turn at synchronous speed and uses pitch control to regulate power output, an induction generator again needs pitch control to limit top speed, and variable-speed turbines would also need to limit top speed (and adjust for best angle of attack at lower speeds). --Wtshymanski (talk) 16:32, 20 March 2014 (UTC)

Does anyone have a reliable source for the difference in power produced between "comparable" fixed vs. variable-speed wind turbines? Elsewhere on this talk page Andol implies that a fixed rotor speed would cause enormous losses; while other people seem to think that a variable-speed wind turbine would only capture 2% or 3% more energy than a "comparable" fixed-speed wind turbine. --DavidCary (talk) 19:23, 19 March 2014 (UTC)

Is there a Wikipedia page that discusses fixed-speed wind turbines, analogous to variable speed wind turbine ?

Is there a Wikipedia page -- other than the wind turbine design section of this page -- that discusses grid-connected wind turbines in general, both fixed-speed and variable-speed? --DavidCary (talk) 17:23, 20 March 2014 (UTC)


 * Well, I cannot quantify the losses. A fixed speed turbine as a lot of aerodynamic losses, because the rotor has only one (or 2) speed options and therefore operates most of the time out of its best Tip-speed ratio. On the other hand, with no electric power converters required there are less electrical losses. Maybe you can look that up in the literature. Greetings, Andol (talk) 21:24, 22 March 2014 (UTC)

Net energy production
Obviously, there is some consumption of electrical energy by the electronics, lights, orientation motors, hydraulic pumps (if fitted) etc. I presume the figures quoted for capacity or electricity generated are gross values. What is the average consumption of, say, a 2 MW turbine? Where I live, I have a clear view of part of a 6x1.8 MW farm, with apparently some form of synchronous generator, as the rotational speed is constant, no matter the wind speed. What intrigues me is that they often rotate with zero wind speed which suggests to me that either the generator acts as a motor or there must be a small motor to keep it turning in synchronism. I presume that the reason for this that the energy consumed in idling must be less than the energy needed to overcome the inertia of starting the blades from a standstill to working speed when the wind re-starts, so that if the average windspeed reaches the generation threshold of ~3.5 m/s, it can start producing immediately rather than wait until the blades reach synchronisation speed. This must consume quite some energy from the grid and this is never mentioned in the production figures. I feel that the article should contain some mention of wind turbine consumption. Unfortunately I do not feel competent to edit it myself. Devilinhell (talk) 15:26, 26 April 2012 (UTC)
 * I doubt that any turbine has a powered rotor - most likely it is a simple case of the Wind profile power law, where wind can feel still on ground but sufficient at hub height to move the blades, if not produce power. Some power is used for electronics and heating. TGCP (talk) 18:59, 30 April 2012 (UTC)
 * Thanks for your view. I did a quick search and indeed found a reference to motoring, albeit with a smaller turbine: "Motoring starts the blades spinning so the turbine operates in lighter wind conditions than if it relied solely on the wind to start." at http://www.endurancewindpower.co.uk/wp-content/uploads/2010/08/E-3120-Product-Brochure-UK-29-Aug-2011.pdf - there could be other references but I didn't have the time to seek them. I have made a deep study of the meteorological conditions in this region and roughly half the days (outside a few winter gale periods), my anemometer (at 22 m above ground level and approximately at hub level of the nearest turbine which is on lower ground) registers average daily wind speeds of <1 m/s. It often registers 0 m/s for hours on end in still anticyclonic conditions with isobar maps showing zero pressure gradient, yet the blades still turn. The Wind profile power law would not indicate that 0 m/s at ground level would give 3.5 m/s at 70 m. Unfortunately, the owners of the farm are not open to discussion, hiding behind what I feel must be a loss-making venture. I cannot obtain figures for the individual farm but I do obtain country-wide wind generation figures and the overall load factor for wind generation is typically, per month, 10-14%. For April:
 * Energy from wind MWh: 12231
 * Total energy, all sources MWh: 305321
 * Average power, wind, MW: 17.0
 * Average power, all sources, MW: 424.1
 * Wind capacity, MW: 133
 * Percentage wind power/wind capacity: 12.8% (load factor)
 * Percentage wind power/total power: 4.0%


 * Devilinhell (talk) 09:15, 3 May 2012 (UTC)
 * The anemometer on the turbine should be easily visible, and any wind that can move a 1 foot tri-cup should also move a 120-foot tri-blade. Whatever the case, we still need WP:Reliable sources to state the direction of power. TGCP (talk) 17:06, 3 May 2012 (UTC)


 * Which 1.8 MW Turbine has a constant rotor speed? In the beginning of wind power usage a lot of turbines had such technique, but nowadays not any more. It may appear, that the rotor speed is constant, but is usually is not. It doesn't make sense either, because a fixed rotor speed would cause enormous losses. And I don't know any turbines, that really use a motor in low wind situations. But if you know the power of the turbines, you might also know the type? Or have a picture for us? That would help a lot in answering your question. Andol (talk) 22:31, 30 November 2013 (UTC)


 * Like Devilinhell, I also would be interested in knowing how much power is consumed adjusting the nacelle yaw, adjusting the blade pitch, running the warning lights, "motoring" (?), etc.
 * Two mundane possibilities for why the blades keep moving even when an anemometer 22 m above ground level reads zero wind speed:
 * (1) The text at wind turbine design seems to say that often the wind speed at a turbine is adequate to drive a turbine even when the wind speed close to the ground is approximately zero. I agree with TGCP that the anemometer on the turbine is much more relevant than any anemometer elsewhere.
 * (2) If the wind suddenly stops, a typical rotor will continue to spin ("freewheel") for some time. Freewheeling generators don't generate any power, but they don't pull any power from the grid, either. How long will a rotor continue to freewheel in still air before a "noticeable" slowdown?
 * --DavidCary (talk) 21:58, 19 March 2014 (UTC)

Gearless wind turbine
The section about Gearless wind turbines says "Gearless wind turbine are often heavier than gear based wind turbines." While this is true it might be good to mention that due to the missing gearbox a gearless wind mill is both lighter and require a smaller nacelle. — Preceding unsigned comment added by 109.228.168.107 (talk) 22:04, 15 October 2012 (UTC)
 * (Please put the new section on a talk page at the END of a talk page.)
 * Some gearless are lighter and smaller (SWP), some are heavier and larger (Enercon) than gearbox turbines. In both cases, we need references to support those claims. TGCP (talk) 18:57, 16 October 2012 (UTC)

Suggest merge
Design feasibilIty of Wind turbine systems is not about its title topic, but is about this topic. Any non-redundant useful content should be merged here. --Wtshymanski (talk) 20:37, 9 October 2013 (UTC)
 * Agree. The present article is 50k, and Feasibility is 15k. SIZERULE suggests articles be split when 50-100k, so another action could be to expand and rename the other article to more technical content, and rewrite this article towards less technical content for the average reader. TGCP (talk) 10:16, 16 October 2013 (UTC)
 * yes, but if the redundant content is eliminated, this article increase by a lot less than 15 k. We have some really stupid articles over 100 k, so it's more a guideline than a rule. --Wtshymanski (talk) 20:25, 16 October 2013 (UTC)

Blacklisted Links Found on the Main Page
Cyberbot II has detected that page contains external links that have either been globally or locally blacklisted. Links tend to be blacklisted because they have a history of being spammed, or are highly innappropriate for Wikipedia. This, however, doesn't necessarily mean it's spam, or not a good link. If the link is a good link, you may wish to request whitelisting by going to the request page for whitelisting. If you feel the link being caught by the blacklist is a false positive, or no longer needed on the blacklist, you may request the regex be removed or altered at the blacklist request page. If the link is blacklisted globally and you feel the above applies you may request to whitelist it using the before mentioned request page, or request its removal, or alteration, at the request page on meta. When requesting whitelisting, be sure to supply the link to be whitelisted and wrap the link in nowiki tags. The whitelisting process can take its time so once a request has been filled out, you may set the invisible parameter on the tag to true. Please be aware that the bot will replace removed tags, and will remove misplaced tags regularly.

Below is a list of links that were found on the main page:


 * http://www.power-technology.com/features/feature-global-wind-energy-market-gears-growth/
 * Triggered by  on the local blacklist

If you would like me to provide more information on the talk page, contact User:Cyberpower678 and ask him to program me with more info.

From your friendly hard working bot.— cyberbot II NotifyOnline 13:21, 3 April 2014 (UTC)

Uncredited use of Wikipedia material
The Castellano book appears to use large chunks of this article, but when I used Google Books to search its contents I was unable to find a Wikipedia credit. I checked for the phrase "night time" and found it was added in this edit in January 2006, well before the copyright date of the Castellano book. The Google preview of its contents shows me that this book section is substantially derived from Wikipedia articles, not the other way around. I have reverted this edit since citing a source dervied from Wikipedia isn't a citation to a reliable source. --Wtshymanski (talk) 15:54, 21 May 2014 (UTC)

Low temperature
These links may provide info on design for low temperature.

This claims to go beyond Betz TGCP (talk) 09:46, 31 May 2014 (UTC)

External links modified (January 2018)
Hello fellow Wikipedians,

I have just modified 4 external links on Wind turbine design. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20090205054846/http://www.berr.gov.uk/files/file17821.pdf to http://www.berr.gov.uk/files/file17821.pdf
 * Added tag to http://energy.gov/sites/prod/files/DOE_CMS_2011.pdf
 * Added archive https://archive.is/20131122140927/http://www.wspa.com/story/23564370/my-secures-off-shore-tender-in-zhuhai-guangdong-province-china-with-3mw-scd-wind-turbine-generators-construction-to-begin-in-october-2013 to http://www.wspa.com/story/23564370/my-secures-off-shore-tender-in-zhuhai-guangdong-province-china-with-3mw-scd-wind-turbine-generators-construction-to-begin-in-october-2013
 * Added archive https://web.archive.org/web/20140209233955/http://www.indianacleanpower.org/renewableresources.html to http://www.indianacleanpower.org/renewableresources.html
 * Added archive https://web.archive.org/web/20060419225935/http://www.bwea.com/ref/faq.html to http://www.bwea.com/ref/faq.html

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

Cheers.— InternetArchiveBot  (Report bug) 18:27, 25 January 2018 (UTC)