Talk:Yoram Koren

.

Edit request
Yoram Koren is an Israeli-American academic. He is the James J. Duderstadt Distinguished University Professor Emeritus of Manufacturing and the Paul G. Goebel Professor Emeritus of Engineering at the University of Michigan, Ann Arbor. Since 2014 he is a Distinguished Visiting Professor at the Technion – Israel Institute of Technology. Koren is a member of the National Academy of Engineering (NAE), and an Honorary Member of the Society of Manufacturing Engineers (SME). He is a Fellow of the International Academy for Production Engineering (CIRP), the Society of Manufacturing Engineers (SME), the American Society of Mechanical Engineers (ASME), and the Institute of Electrical and Electronics Engineers (IEEE) “For contributions to flexible automation and manufacturing systems”.

Early life and education
Yoram Koren was born in Tel-Aviv, Mandatory Palestine. He studied at Ironi Alef High School in Tel-Aviv and served at the Israeli Air Force as an electronics technician. He received B.Sc. in Electrical Engineering from the Technion - Israel Institute of Technology, in 1965. His M.Sc. was received from the same department in 1968. He continued his Ph.D. studies in Mechanical Engineering at the Technion and graduated in January 1971. His thesis on Model and Optimization of a Machining Process and its Control, was supervised by Prof. Ehud Lenz.

Career
Koren started his career at the Technion–Israel Institute of Technology, where he was a Lecturer from 1971 to 1973, and a professor from 1975 to 1985. Koren was the Head of the Technion Robotics Laboratory from 1982 to 1985. From 1980 to 1982, Koren was on sabbatical and leave of absence at the University of Michigan, where he was the Paul G. Goebel Visiting Professor of Engineering. In 1986 he joined U-M as a tenured professor, and in 1993 he was appointed as the Paul G. Goebel Professor of Engineering. In 2010 Koren was named the James J. Duderstadt Distinguished University Professor of Manufacturing. Koren retired in 2014. Since 2015 Koren has been a Distinguished Visiting Professor at Technion, where he was also the Edmond J. Safra Distinguished Visiting Professor Chair in 2007. Koren is the founding director (in 1996) of the NSF-sponsored Engineering Research Center (ERC) for Reconfigurable Manufacturing Systems (RMS), an ERC that was financially sponsored (at $47 million) by the National Science Foundation and 25 industrial companies until 2012. Under Koren’s leadership, 70 Ph.D. students and 270 M.S. graduated from the RMS center.

Research
Koren is a member of the U.S. National Academy of Engineering (NAE) “For contributions to the science, education, and practice of manufacturing through innovations in reconfigurable manufacturing systems, robotics, and manufacturing system control”. Koren is holding 14 U.S. patents in these fields. He has published 4 books and more than 300 scholarly papers that have over 31,000 citations, with an h-index of 77 (according to Google Scholar). Reconfigurable Manufacturing Systems (RMS): Koren is the inventor of the Reconfigurable Machine Tool, the Reconfigurable Manufacturing Systems, and the Reconfigurable Apparatus for Inspection. Koren introduced the RMS structural architecture and its benefits to the international manufacturing research community in 1999. Koren presented at the CIRP Annual Meeting in France the keynote paper “Reconfigurable Manufacturing Systems”, defining RMS as: “A manufacturing system that has an adjustable structure that enable rapid system scalability in response to market demands, and system adaptability to new products”.

Flexible Automation and CNC: Koren’s research in the 1970s was focused on developing methods for the precise control of CNC (computer numerically controlled) machines aimed at enhancing their precision and increasing their productivity. In 1973 Koren invented the first computerized real-time adaptive controller for a milling machine. In 1976 Koren published the first scientific paper on interpolators for CNC machines. In 1980 he published the Cross-Coupled Controller that enhances CNC precision by software [paper 6].

Robotics: Koren started his robotics research (and mobile robot research in particular) in 1980. Koren and his former Ph.D. student developed the autonomous mobile robot CARMEL (Computer-Aided Robotics for Maintenance, Emergency, and Life-support), featured on a CNN national program in 1988. CARMEL’s motion algorithms are described in [Papers 9, 10]. In 1992 CARMEL won the 1st Autonomous Mobile Robot Competition sponsored by the Association for the Advancement of Artificial Intelligence. Koren invented the world’s-first snake robot [paper 11].

Mass-Individualization: Koren proposed a new manufacturing system architecture that enables producing Market-of-One products at affordable cost. [Papers 14, 15]. To achieve buyer’s satisfaction, proximity between the mass-individualization factory and the customer is required.

Books

 * Koren, Y. and J. Ben-Uri (1978) Numerical Control of Machine Tools. Khanna Publishers.
 * Koren, Y. (1983) Computer Control of Manufacturing Systems. McGraw-Hill. ISBN: 978-0070353411.
 * Koren Y. (1985) Robotics for Engineers. McGraw-Hill. ISBN:978-0070353992. (This book was also translated by the publisher to Japanese and French)
 * Koren, Y. (2010) The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems. Wiley. ISBN: 978-0470583777. (This book was also translated to Chinese).

Selected articles
RMS
 * 1) Y Koren, U Heisel, F Jovane, T Moriwaki, G Pritschow, G Ulsoy: Reconfigurable manufacturing systems. CIRP Annals, 48 (2), 527-540, 1999.
 * 2) YM Mehrabi, G Ulsoy, Y Koren: Reconfigurable manufacturing systems: Key to future manufacturing.  Journal of Intelligent Manufacturing, 11 (4), 403-419, 2000.
 * 3) Y Koren, M Shpitalni: Design of reconfigurable manufacturing systems. Journal of Manufacturing Systems, 29 (4), 130, 2010.
 * 4) Y Koren, X Gu, W Guo: Reconfigurable manufacturing systems: Principles, design, and future trends. Frontiers of Mechanical Engineering, 13 (2), 121-136, 2018.

CNC 1. Y Koren: Interpolator for a computer numerical control system. IEEE Transactions on Computers, 25(1), 67-73. 1976.

2. Y Koren: Cross-coupled biaxial computer control for manufacturing systems. ASME Journal of Dynamic Systems, Measurements and Control, 102 (4), 265-272. 1980.

3. RS Lin, Y Koren: Efficient tool-path planning for machining free-form surfaces. Trans. ASME, 118 (1), 20-28, 1996.

4. Y Koren: Control of machine tools. Transactions ASME Journal of Mechanical Design, 119 (4), 749-755. 1997. Robotics 1. J Borenstein, Y Koren: The Vector Field Histogram-fast obstacle avoidance for mobile robots. IEEE Transactions on Robotics and Automation. 7 (3), 278-288,1991.

2. Y Koren, J Borenstein: Potential field methods and their inherent limitations for mobile robot navigation. IEEE Proceedings of International Conference on Robotics and Automation. 1398-1406. 1991.

3. Y Shan, Y Koren: Design and motion planning of a mechanical snake. IEEE Transactions on systems, man, and cybernetics. 23 (4), 1091-1100, 1993.

4. S Shoval, J Borenstein, Y Koren: The Navbelt – A computerized travel-aid for the blind based on mobile robot technology. IEEE Transactions on Biomedical Engineering, 45 (11) 1376-1386, 1998. Mass-Individualization 1. Y Koren, SJ Hu, P Gu, M Shpitalni: Open-architecture products. CIRP Annals, 62(2), 719-729. 2013.

2. Y Koren, M Shpitalni, P Gu, SJ Hu: Product design for mass-individualization. Procedia CIRP 36, 64-71, 2015.

3. Y Koren, The Local Factory of the Future for Producing Individualized Products. The Bridge, 51(1), 20-26, 2021.

Honors and Awards

 * CIRP Fellow (1985)
 * SME Fellow (1987)
 * ASME Fellow (1990)
 * Member of National Academy of Engineering (2004)
 * Hideo Hanasufa Outstanding Investigator Award (2004)
 * M. Eugene Merchant Manufacturing Medal of ASME/SME (2006)
 * Yoram and Alina Koren Conference Room at the University of Michigan (2012)
 * IEEE Life Fellow (2013)
 * SME Honorary Member (2015)

Personal Life
Yoram is married to Alina (MA in Literature) who was a Lecturer at the University of Michigan, and they have two children: Shlomy and Esther (who passed away in October 2020).

Edit request
Yoram Koren is an Israeli-American academic. He is the James J. Duderstadt Distinguished University Professor Emeritus of Manufacturing and the Paul G. Goebel Professor Emeritus of Engineering at the University of Michigan, Ann Arbor. Since 2014 he is a Distinguished Visiting Professor at the Technion – Israel Institute of Technology. Koren is a member of the National Academy of Engineering (NAE), and an Honorary Member of the Society of Manufacturing Engineers (SME). He is a Fellow of the International Academy for Production Engineering (CIRP), the Society of Manufacturing Engineers (SME), the American Society of Mechanical Engineers (ASME), and the Institute of Electrical and Electronics Engineers (IEEE).

Education

 * D.Sc., Mechanical Engineering, Technion-Israel Institute of Technology, 1971
 * M.Sc., Electrical Engineering, Technion-Israel Institute of Technology, 1968
 * B.Sc., Electrical Engineering, Technion-Israel Institute of Technology, 1965

Career
Koren started his career at the Technion–Israel Institute of Technology, where he was a Lecturer from 1971 to 1973, and a professor from 1975 to 1985. Koren was the Head of the Technion Robotics Laboratory from 1982 to 1985. From 1980 to 1982, Koren was on sabbatical and leave of absence at University of Michigan, where he was the Paul G. Goebel Visiting Professor of Engineering. In 1986 he joined U-M as a tenured professor, and in 1993 he was appointed as the Paul G. Goebel Professor of Engineering. In 2010 Koren was named the James J. Duderstadt Distinguished University Professor of Manufacturing. Distinguished University Professorships is UM’s most prestigious professorships, to recognize senior faculty with exceptional scholarly and/or creative achievements, national and international reputations for academic excellence, and superior records of teaching. Koren retired in 2014. Since 2015 Koren has been a Distinguished Visiting Professor at Technion, where he was also the Edmond J. Safra Distinguished Visiting Professor Chair in 2007. Koren is the founding director (in 1996) of the NSF-sponsored Engineering Research Center (ERC) for Reconfigurable Manufacturing Systems (RMS), an ERC that was financially sponsored (at $47 million) by the National Science Foundation and 25 industrial companies until 2012. Under Koren’s leadership, 70 Ph.D. students and 270 M.S. graduated from the RMS center. The RMS center was the very first NSF-sponsored ERC in the U-M College of Engineering, which is recognized as a formal milestone in the U-M College of Engineering 150-year history. A conference room at the ERC-RMS space is named The Yoram and Alina Koren Conference Room to honor Yoram’s ingenuity and his wife Alina’s strategic advice.

Research
Koren is internationally recognized for contributions to reconfigurable manufacturing systems, flexible automation, and robotics. Koren is holding 14 U.S. patents in these fields. Koren has published 4 books and more than 300 scholarly papers that have over 30,000 citations (according to Google Scholar ). Reconfigurable Manufacturing Systems: Koren is best known as “The Father of Reconfigurable Manufacturing Systems”. He is credited with coining the term “Reconfigurable Manufacturing Systems” (RMS) as well as creating the scientific underpinnings of the reconfigurable manufacturing paradigm, and defining the RMS as a system that has "exactly the production resources needed, exactly when needed." Many of Koren’s RMS inventions, hardware and software, were implemented in numerous automotive and aerospace factories. In 1999 Koren presented at the CIRP Annual Meeting the keynote paper “Reconfigurable Manufacturing Systems.”. This paper was published in the CIRP Annals - Manufacturing Technology, and has established RMS as a new, worldwide research discipline with practical implementations. Flexible Automation and CNC: Koren’s research in the 1970s was focused on developing methods for the precise control of CNC (computer numerically controlled) machines aimed at enhancing their precision and increasing their productivity. In 1973 Koren invented the world’s-first computerized real-time adaptive controller for a milling machine. This invention is highlighted on the U-M 200-year Research Milestones chart : “Dr. Koren’s computerized adaptive controller invention occurred long before computers were commonly used in industrial applications. Before Dr. Koren’s work in the 1970's, numerical control of machine tools was more of an art than science.” In 1976 Koren published the world’s-first scientific paper on interpolators for CNC machines. Robotics: Koren started his robotics research (and mobile robot research in particular) in 1980. Koren and his former Ph.D. student developed the autonomous mobile robot CARMEL (Computer-Aided Robotics for Maintenance, Emergency, and Life-support), featured on a CNN national program in 1988. In 1992 CARMEL won the 1st Autonomous Mobile Robot Competition sponsored by the Association for the Advancement of Artificial Intelligence, beating nine other mobile robots from leading institutions (such as SRI, CMU, MIT).

Books
Koren, Y. and J. Ben-Uri (1978) Numerical Control of Machine Tools. Khanna Publishers. Koren, Y. (1983) Computer Control of Manufacturing Systems. McGraw-Hill. ISBN: 978-0070353411. Koren Y. (1985) Robotics for Engineers. McGraw-Hill. ISBN:978-0070353992. (This book was also translated by the publisher to Japanese and French) Koren, Y. (2010) The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems. Wiley. ISBN: 978-0470583777. (This book was also translated to Chinese.)

Honors and Awards

 * CIRP Fellow (1985)
 * SME Fellow (1987)
 * ASME Fellow (1990)
 * William T. Ennor Manufacturing Technology Award of ASME (1999)
 * Member of National Academy of Engineering (2004)
 * Hideo Hanasufa Outstanding Investigator Award (2004)
 * M. Eugene Merchant Manufacturing Medal of ASME/SME (2006)
 * SME Gold Medal (2007)
 * Stephen Attwood Excellence in Engineering Award (2008), UM College of Engineering
 * Dedication of Yoram and Alina Koren Conference Room at the University of Michigan (2012)
 * IEEE Life Fellow (2013)
 * SME Honorary Member (2015)
 * Namesake for SME Outstanding Young Manufacturing Engineer Award (2017)

Personal Life
Yoram is married to Alina (MA in Literature) who was a Lecturer at the University of Michigan, and they have two children: Shlomy and Esther, daughter-in-law Rily, and three grandchildren: Rony, Mayan, and Eytan.

Edit request
Please change the second paragraph in the Robotics sub-section of the Research section (which starts with the words: “Shan and Koren were the first to develop a model…”) to the following text:

In 1991 Koren received a grant of $220,000 to develop “Sensor-Based Control of a Mechanical Snake [ref a]. Shan and Koren built a 7-link snake, that its first link had a camera, and 6 motors were installed at the 6 joints to provide forward motion. [ref b] Shan and Koren were the first to develop a model of how external objects could affect kinematic constraints on the movement of a snake robot in 1993.[23][24]

Ref. a: NSF Award #9112717 “Sensor-Based Control of a Mechanical Snake.” Investigator: Yoram Koren. November 1991. https://www.nsf.gov/awardsearch/showAward?AWD_ID=9112717

Ref. b: Y. Shan, Y. Koren: Design and motion planning of a mechanical snake. IEEE Trans. on Systems, man, and Cybernetics 23(4), 1091-1100. 1993 https://ieeexplore.ieee.org/abstract/document/247890 --Adig-pt (talk) 14:30, 31 August 2022 (UTC)


 * @Adig-pt ✅ Cheers. Duke Gilmore (talk) 15:56, 13 January 2023 (UTC)