Template:Chembox Properties/doc

Usage
This box can be used as a complete section inside the chembox. Copy the left column into an existing Chembox.

Chembox Properties - incomplete list Reference Chemical formula reference comment per element (alternative input) molecule charge MolarMass MolarMassRound MolarMass_ref MolarMass_notes Appearance Odor, Odour Density MeltingPt, any text Number, in Celsius. Is converted to F and K Also possible: MeltingPtF=, or MeltingPtK= BoilingPt, any text Number, in Celsius. Is converted to F and K Also possible: BoilingPtF=, or BoilingPtK= Critical temperature and pressure SublimationConditions Solubility in water (Aqueous solution) SolubilityProduct SolubilityProductAs SolubleOther Solvent Solubility1

Solubility2

Solubility3

Solubility4

Solubility5

Solubility6

Critical micelle concentration (units must be manually inserted) Hydrophilic-lipophilic balance (units must be manually inserted) LogP VaporPressure HenryConstant AtmosphericOHRateConstant pKa pKb Conjugate acid Conjugate base IsoelectricPt ElectricalResistivity LambdaMax Absorbance BandGap ElectronMobility SpecRotation MagSus ThermalConductivity RefractIndex Viscosity CriticalRelativeHumidity Dipole OrbitalHybridisation SpecificSurfaceArea PoreVolume AveragePoreSize

Chemical formula
Chemical formula by element:

OR hardcoded (formula input will show unedited)

Temperatures
Temperatures for both for the melting point and boiling point can be entered in multiple ways. MeltingPt and BoilingPt allow any textual input. E.g.:
 * Unknown shows: Unknown

When supplying a temperature value (the numerical value in either °C, °F or K), the infobox will calculate and present all three temperatures. Only one of the three _C, _F, _K values may be entered. E.g.:
 * 100 shows: 100 C

To show a temperature range, simply add the corresponding _CH high value (_FH, _KH). E.g.:
 * 50 75 shows 50 or

All available temperature parameters:

Example

 * Ammonia (and some exemplary additions)

TemplateData
{	"params": { "ExactMass": {} },	"description": "Adds a subsection to . To be used: |Section2=", "paramOrder": [ "ExactMass" ] }