Template:Infobox motorcycle/doc

Meanings
Unit of measurement should be consistent with primary country of origin. Input to Template:Convert the actual values and units given in your source, and if needed, use the  parameter to output the bike's native metric or US units. In most cases, accept the Convert template's default output units and rounding, rather than force output units or precision. Fields which require lots of detail, clarification, or qualifications should be condensed or left blank, with the data and full explanation in the article body.
 * name: Include both the make and model of the motorcycle.
 * image: A representative image of the motorcycle taken against a background without distractions, sharp focus, and uniform lighting. A side view is generally preferred.
 * Formats like  will work, but for consistency it is better to use the defaults for this template, using only the plain file name, in the form   omitting  . The default scaling factor is , or 35% wider than the user's image width preference. Users not logged in default to 220px, which means the lead image will be about 300px. See WP:IMAGESIZE.
 * alt: Text alternative for those who cannot see the image
 * caption: Caption for image
 * aka: Other names used by reliable sources. For the Honda CB600F:
 * manufacturer: Brand/marque name or division
 * parent company: Industrial group or holding company which owns the marque/brand/division at the time the motorcycle was produced (if any)
 * production: Dates of manufacture, with month, if known. Dates of sale, or model years are alternatives, but specify which.
 * assembly: cities and countries where the model is built
 * predecessor: Previous models from the manufacturer in the segment or similar
 * successor: Following models in the segment or similar
 * class: Use article types of motorcycle to see different classes and descriptions.
 * engine: Use article motorcycle engine to see different types.
 * bore_stroke: Use the convert template to convert both parameters e.g.
 * compression: The cylinders' compression ratio, e.g.
 * top_speed: Maximum tested speed. Use convert for proper conversions. (Note: This parameter must be supported by a reliable reference)
 * power: The maximum achieved power, preferably indicating the RPM in which it is achieved. (Note: This parameter must be supported by a reliable reference)
 * torque: The maximum achieved torque, preferably indicating the RPM in which it is achieved. (Note: This parameter must be supported by a reliable reference)
 * ignition: Type of ignition mechanism such as mechanically timed, electronic, or digital. Inductive magneto or Distributor and breaker points, CDI, etc.
 * fuel_delivery: Type of fuel delivery system used, such as a carburetor or fuel injector. This field may include specific make/model of stock injector or carburetor
 * transmission: First, clutch type (wet, dry, dual clutch). Second, number of gears ("6-speed") and type (automatic, manual, CVT). Third, drive type ("chain", "belt") Fourth, number of forward gear ratios, and the type of transmission (e.g. "6-speed manual, 5-speed automatic")
 * frame: See Motorcycle frame for frame types. Frame material and type.
 * suspension: Say "Front: xxxx" or "F: xxxxx" and "Rear: xxxxx" or "R: xxxxxx". May begin with brand.
 * brakes: Front/rear as with suspension. Size followed by type.
 * tires: Front/rear as with suspension. Use Tire code. May begin with brand. May add wheel material and type.
 * rake_trail: Use the degree symbol, a comma, and distance, e.g.
 * wheelbase:
 * length:
 * width:
 * height:
 * seat_height:
 * dry weight: (Note: This parameter must be supported by a reliable reference)
 * wet weight: (Note: This parameter must be supported by a reliable reference)
 * fuel capacity: Nominal capacity of the fuel tank
 * oil_capacity: Only applies to 2-stroke engines with a separate oil tank. This is not the engine's lubricant capacity, which we do not normally mention.
 * fuel_consumption: (Note: This parameter must be supported by a reliable reference)
 * turning_radius: Rarely relevant except to small city bikes like mopeds. "Turning radius" is identical to "turning circle".
 * related: Bikes from the same manufacturer sharing a purpose but with different displacements, or sharing engines but with different purposes. Not competitors' models.
 * range: Maximum traveling distance without refueling/recharging. (Note: This parameter must be supported by a reliable reference)
 * sp: Use "uk" to display "Tyres" instead of "Tires"
 * footnotes : Use to list citations that validate the data in the infobox or to note information about the terms, names and figures used. Generally it is not necessary to footnote uncontroversial stats, but performance claims, i.e. power, torque, weight and fuel economy, must be cited.

Optional parameters
The optional CSS parameters listed above can be used to define style for the body, title, label, or data areas.