UIC wagon numbers



Wagon numbers (or coach numbers) are key data for railway operations. They enable a railway wagon or coach to be positively identified and form a common language between railway operators, infrastructure companies and the state authorities. The system of wagon numbering has been laid down by the International Union of Railways (Union internationale des chemins de fer or UIC, founded in 1922) and is similar to that used for the locomotives and multiple units. Vehicle numbering is now governed by the Intergovernmental Organisation for International Carriage by Rail and in Technical Specifications for Interoperability (TSI) of the European Union.

The complete wagon number comprises 12 digits. The individual digits have the following meaning:

Placement of the code
As shown on the photographs at right, the code may be arranged either vertically (e.g. on closed wagons) on three or more lines at man's height with the letter codes next to the corresponding part of the digit code, or horizontally (e.g. on flat wagons) at the bottom of the chassis side with all digits together (with groups separated by spaces and the check digit by a dash) and all letters together. It is always found on both sides of the wagon, not on the front or back.

Calculation of the self-check digit
The digits are multiplied individually from right to left alternately by 2 and 1, and digit summed using the Luhn algorithm. The difference between this sum and the next multiple of ten is the check digit, placed after the eleventh digit, separated by a dash.

Examples
Wagon number: 2 1    8  1    2  4  7  1    2  1  7              multiplying by   2  1    2  1    2  1  2  1    2  1  2 gives 4 1   16  1    4  4 14  1    4  1 14                digit sum 4 1    7  1    4  4  5  1    4  1  5                 sum = 37 next multiple of ten = 40 check digit = 40-37 = 3 2 1    8  1    2  4  7  1    2  1  7  -  3

Wagon number: 5 1    8  0    0  8  4  3    0  0  1             multiplying by   2  1    2  1    2  1  2  1    2  1  2 gives 10 1   16  0    0  8  8  3    0  0  2                digit sum 1 1    7  0    0  8  8  3    0  0  2                 sum = 30 next multiple of ten = 30 check digit = 30-30 = 0 5 1    8  0    0  8  4  3    0  0  1  -  0

Country code
At the beginning of 2006 the country replaced the owner (almost exclusively state railways), with the owner now indicated by following letters. For example, for a vehicle registered in Germany on the AAE, which had its own code as a private railway,  became. (see also UIC country code)

Reading of numbers
Numbers are read visually, the method of choice today (2008). No railway is able to read the number automatically with the required reliability (less than 1 error in 10,000). Using OCR readers the numbering (DB AG: Font Gerade Normschrift DIN 16 Variant DB) can be only be read to an accuracy of no better than 5% (1 in 20).

Numbering systems
The UIC has the following numbering systems, as detailed in leaflets:


 * Leaflet 419-2 – Analytical numbering of international freight trains.
 * Leaflet 428-1 – International sorting system for wagonload traffic.
 * Leaflet 438-2 – Identification marking for freight rolling stock.
 * Leaflet 920-1 – Standard numerical coding for railway undertakings, infrastructure managers and others companies involved in rail-transport chains.
 * Leaflet 920-2 – Standard numerical coding of locations.
 * Leaflet 920-10 – Standard numerical code for railway customers.
 * Leaflet 920-14 – Standard numerical country coding for use in railway traffic.

These agreements have not yet achieved the status of a standard or norm.