User:Al.kafagy/قصي كمال الدين الأحمدي

Qusai Kamal Al-Din Dawood Ahmed Al-Ahmadi, an Iraqi university professor and civil engineer, holds a PhD in civil engineering.

Birth and study
Qusai Kamal al-Din was born in the city of Mosul on July 29, 1966, and after completing his primary and secondary studies in 1989, he joined the College of Civil Engineering at the University of Mosul, and obtained a Bachelor’s degree in Civil Engineering in 1993, then obtained a Master’s degree in 1995, from the same college. He completed his studies outside Iraq and obtained a doctorate in civil engineering with a specialization in environmental engineering from Saint Petersburg University in 1999, and a post-doctoral study in environmental engineering from the University of North Texas in 2009, he held the position of head of the environmental engineering department at the College of Engineering at Mosul University, and the position of Dean of the College Environmental Sciences and Technologies at the University of Mosul, as well as the Dean of the College of Petroleum and Mining Engineering at the University of Mosul, and the President of the University of Mosul from 2019 until now. He is a member of the Iraqi Engineers Syndicate, the Federation of Arab Engineers, the Jordanian Environmental Society, and the Wetland Scientists Society in the United States of America.

scientific certificates

 * Bachelor's degree in Civil Engineering from the University of Mosul
 * Master's degree in Civil/Environmental Engineering from University of Mosul
 * PhD in Civil/Environmental Engineering, Saint Petersburg University
 * Postdoctoral Environmental Engineering from the University of North Texas.

Scientific expertise

 * 1) Preparing more than (200) environmental impact assessment studies for various industrial projects in Iraq.
 * 2) Supervising the operation of the civilian wastewater treatment plant in the Shurao area in Kirkuk,, 2015
 * 3) Design and supervision of the implementation of the treatment plant of the General Company for Ready-made Garments in Mosul, 2014
 * 4) Design and supervision of the implementation of the treatment plant of Al Kayara General Hospital, 2014
 * 5) Design of a drinking water plant for the island water project, 2014
 * 6) Design of Matrouh water treatment plants in different cities such as Bartella, Baaj, Hatra, Debaga, Rabia, 2011-2013
 * 7) Design of the water treatment plant from Kamal Tannery and Al-Sagherji Tannery, 2014
 * 8) Design of the main pumping station for the box duct in the city of Mosul, 2008
 * 9) Design of the Matrouh Water Treatment Plant in Al Salam General Hospital in Mosul, 2008
 * 10) Design of the Matrouh Water Treatment Plant in Ibn Al-Atheer Children’s Hospital in Mosul, 2008
 * 11) Design of a wastewater treatment plant in Shifa Fever Hospital in Mosul, 2008
 * 12) Design of Matruhat Water Treatment Plant in Al-Khansa Hospital in Mosul, 2008
 * 13) Design of Matrouh Water Treatment Plant in Mosul General Hospital, 2008
 * 14) Design of a water treatment plant in the Northern Oil Lines Company, 2007
 * 15) Design of the conveyor line and water supply network in the Oil Lines Company, 2007
 * 16) Design and supervision of the implementation of the outlet and water supply network in the downstream area of ​​the Bakhme Dam, 2007
 * 17) Design of damping troughs for the Bakhme Dam project, 2006
 * 18) Design of industrial water treatment units resulting from Mosul Textile Factory, 2006
 * 19) Design of industrial water treatment and reuse units in Badush 3 and Polusius cement plants, 2005
 * 20) Design of industrial water treatment and reuse units in the old and new Hammam Al-Alil cement factories, 2005
 * 21) Rehabilitation of the civil liquid wastewater treatment plant in Nineveh Oberoi International Hotel, 2004
 * 22) Design of Matrouh water treatment plants for (4) factories for the production of soft drinks in the city of Mosul, 2004
 * 23) Designing the necessary treatment plants for (7) poultry carrot factories in and outside the city of Mosul, 2004
 * 24) Design and Supervision of the Rehabilitation of the Disposal Water Treatment Plant at Al Salam Hospital in Mosul, 1994
 * 25) Designing miniature water treatment units for many food industries in the city of Mosul and abroad, such as the brie and sweets industry, and others, 1999
 * 26) Design of units needed to treat water used to cool electric generators in Baiji Thermal Power Plant, 1999
 * 27) Design of a permanent industrial and civil Matrouh water plant for the Nineveh Company for the production of foodstuffs, 1999
 * 28) Design and supervision of the implementation of the industrial waste water treatment plant in the Samarra Pharmaceutical Factory, 1984
 * 29) Designing the necessary units and supervising the rehabilitation of the civil and industrial wastewater treatment plant in the Mosul Dam power plant, 1998
 * 30) Design and supervision of the implementation of the industrial and civil Matrouh water treatment plant for the Nineveh Pharmaceutical Factory, 1974

Supervision of postgraduate students (PhD, Masters and Higher Diploma)

 * 1) The effect of local electric generators on air quality in different areas of the city of Mosul, Master's Thesis, 2014
 * 2) Mechanisms of Rehabilitation of the Energy Efficient Internal Environment in the Educational Buildings of the University of Mosul, Master Thesis, 2014
 * 3) The use of some industrial waste and demolition and construction waste in improving some engineering properties of the soil, Master’s Thesis, 2020
 * 4) Stimulating environmental leadership behavior towards the application of solid waste management: A case study at the University of Mosul, doctoral thesis, 2020
 * 5) Measuring Energy Intensity Levels Emitted by Mobile Phone Towers in Selected Areas of Mosul City, Master Thesis, 2020
 * 6) Assessment of the quality of bottled water and the effect of storage on it, Master's thesis, 2020
 * 7) Assessment of asbestos pollution in the soils of selected areas of the city of Mosul, Master’s thesis 2020
 * 8) The effect of the internal recycling rate on the efficiency of pollutant removal from the biological treatment unit, Master's thesis 20184
 * 9) Design of the water supply network and water ducts for a multi-storey tourist hotel containing a swimming pool, high diploma project, 2018.
 * 10) Using geographic information systems to manage the ruins of demolished buildings on the right side of the city of Mosul, Master's thesis, 2018
 * 11) Evaluation of some pollutants of the Tigris River in the area between Mosul Dam and Qayyarah, Master's Thesis, 2018
 * 12) Pollution of road edges with a group of heavy metals, Master's thesis, 2017
 * 13) The effect of changing some operational conditions on the efficiency of using the heavy magnetic sintering technique in removing turbidity, Master Thesis, 2017
 * 14) Pretreatment of Wastewater by Aeration, Master Thesis, 2016
 * 15) The ability of sound insulation for a group of construction materials used in Iraq, Master's thesis, 2016
 * 16) Assessment of the spread of air pollutants resulting from the cement industry, master's thesis, 2014
 * 17) Using electrocoagulation to remove contaminants in fully blended reactors, Ph.D. thesis, 2014
 * 18) Design of the German foundations system for a multi-storey building, a high diploma project, 2014
 * 19) The effect of feeding method and organic load on the stability of activated sludge with continuous and intermittent plug flow, Master Thesis, 2014
 * 20) The effect of changing intermittent feeding and ventilation on the efficiency of the performance of activated sludge units with sectoral flow, Master's Thesis, 2013
 * 21) Design of a liquefaction and sewage network for a residential area, high diploma project, 2013
 * 22) The effect of the percentage of recycling, organic load and suspended matter load on the efficiency of the bio-filter in the plastic medium, Master’s Thesis, 2013
 * 23) The effect of changing the hydraulic stack time and the anaerobic to aerobic zone volume ratio on the performance efficiency of 24 units. Activated sludge developed by cold-fu system, master's thesis, 2012
 * 24) The effect of hydraulic residence time, applied load and water temperature on the efficiency of removing organic pollutants, nitrogen and phosphorous in oxidation ponds covered with water lentil plants, Master's thesis, 2012
 * 25) Design of a liquefaction station for a residential area (60,000) people, high diploma project, 2012
 * 26) The effect of the difference between the temperature of the water in the basin and the inlet water on the sedimentation efficiency and the percentage of turf in rectangular sedimentation basins, Master’s thesis, 2011
 * 27) The effect of using anaerobic selective ponds on the efficiency of continuous flow activated sludge systems, Master's Thesis, 2010
 * 28) A comparison between the two methods of continuous ventilation and intermittent ventilation in the efficiency and continuity of continuous flow sludge sludge systems, Master's Thesis, 2010
 * 29) Comparison of the performance of moderate-temperature and heat-loving activated sludge systems in the treatment of dairy waste water, Master's Thesis, 2006
 * 30) The use of up-flow anaerobic biological filters in domestic gray water treatment, Master's Thesis, 2008
 * 31) The use of dry anaerobic treatment technology in the treatment of solid household waste, Master's thesis, 2008
 * 32) Developing the performance of activated sludge units using the integrated constant growth technique, Master's Thesis, Master's Thesis, 2007

المصادر
