User:Aolzick/sandbox

Sonoluminescence is a phenomenon that occurs when a small gas bubble is acoustically suspended and periodically driven in a liquid solution at ultrasonic frequencies, resulting in bubble collapse, cavitation, and light emission. The thermal energy that is released from the bubble collapse is so great that it can cause weak light emission. The mechanism of the light emission remains uncertain, but some of the current theories, which are categorized under either thermal or electrical processes, are Bremsstrahlung radiation, argon rectification hypothesis. , and hot spot. People are beginning to lean more towards thermally processes because temperatures have consistently been proven with different methods of spectral analysis. In order to understand the light emission mechanism, it is important to know what is happening in the bubble's interior and at the bubble's surface.

Current Competing Theories
Prior to the early 1990's, the studies on different chemical and physical variables of sonoluminescence were all conducted using multi-bubble sonoluminescence (MBSL). This was a problem since all of the theories and bubble dynamics were based on single bubble sonoluminescence (SBSL) and researchers believed that the bubble oscillations of neighboring bubbles could affect each other. Single bubble sonoluminescence wasn't achieved until the early 1990's and allowed the study of the effects of various parameters on a single cavitating bubble. After many of the early theories were disproved, the remaining plausible theories can be classified into two different processes: electrical and thermal.

Single-Bubble Sonoluminescence (SBSL)
SBSL emits more light than MBSL due to fewer interactions between neighboring bubbles. Another advantage for SBSL is that a single bubble collapses without being affected by other surrounding bubbles, allowing more accurate studies on acoustic cavitation and sonoluminescence theories. Some exotic theories have been made, for example from Schwinger in 1992 who hinted the dynamical Casimir effect as a potential photon-emission process. Several theories say that the location of light emission is in the liquid instead of inside the bubble. Other SBSL theories explain, that the emission of photons due to the high temperatures in the bubble are analogical to the hot spot theories of MBSL. Regarding the thermal emission a large variety of different processes are prevalent. Because temperatures are increasing from several hundred to many thousand kelvin during collapse, the processes can be molecular recombination, collision-induced emission, molecular emission, excimers, atomic recombination, radiative attachments of ions, neutral and ion Bremsstrahlung, or emission from confined electrons in voids. Which of these theories applies depends on accurate measurements and calculations of the temperature inside the bubble.

Multi-Bubble Sonoluminescence (MBSL)
Unlike single-bubble sonoluminescence, multi-bubble sonoluminescence is the creation of many oscillating and collapsing bubbles. Typically in MBSL, the light emission from each individual bubble is weaker than in SBSL because the neighboring bubbles can interact and affect each other. Because each neighboring bubble can interact with each other, it can make it more difficult to produce accurate studies and to characterize the properties of the collapsing bubble.

Bubble Interior
One of the greatest obstacles in sonoluminescence research has been trying to obtain measurements of the interior of the bubble. Most measurements, like temperature and pressure, are indirectly measured using models and bubble dynamics.

Temperature
Some of the developed theories about the mechanism of SBSL result in prognoses for the peak temperature from 6000 K to 20,000 K. What they all have in common is, a) the interior of the bubble heats up and becomes at least as hot as that measured for MBSL, b) water vapor is the main temperature-limiting factor and c) the averaged temperature over the bubble does not rise higher than 10,000 K.

Bubble Dynamics
These equations were made using five major assumptions, with four of them being common to all the equations: The fifth assumption, which changes between each formulation, pertains to the thermodynamic behavior of the liquid surrounding the bubble. These assumptions severely limit the models when the pulsations are large and the wall velocities reach the speed of sound.
 * 1) The bubble remains spherical
 * 2) The bubble contents obey the ideal gas law
 * 3) The internal pressure remains uniform throughout the bubble
 * 4) No evaporation or condensation occurs inside the bubble

Keller-Miksis Formulation
The Keller-Miksis formulation is an equation derived for the large, radial oscillations of a bubble trapped in a sound field. When the frequency of the sound field approaches the natural frequency of the bubble, it will result in large amplitude oscillations. The Keller-Miksis equation takes into account the viscosity, surface tension, incident sound wave, and acoustic radiation coming from the bubble, which was previously unaccounted for in Lauterborn's calculations. Lauterborn solved the equation that Plesset, et al. modified from Rayleigh's original analysis of large oscillating bubbles. Keller and Miksis obtained the following formula:

$$\left ( 1 - \frac{\dot{R}}{c} \right ) R \ddot{R} + \frac{3}{2} \dot{R^2} \left ( 1 - \frac{\dot{R}}{3c} \right ) = \left ( 1 + \frac{\dot{R}}{c} \right ) \frac{1}{\rho_l} \left [ p_B(R,t) - p_A(t+\frac{R}{c}) - P_\infty \right ] + \frac{R dp_B(R,t)}{\rho_l c dt}$$

where $$\scriptstyle R$$ is the radius of the bubble, the dots indicate first and second time derivatives, $$\scriptstyle \rho_l$$ is the density of the liquid, $$\scriptstyle c$$ is the speed of sound through the liquid, $$\scriptstyle dp_B(R,t)$$ is the pressure on the liquid side of the bubble's interface, $$\scriptstyle t$$ is time, and $$\scriptstyle p_A(t+\frac{R}{c})$$ is the time-delayed driving pressure.

Prosperetti Formulation
Prosperetti found a way to accurately determine the internal pressure of the bubble using the following equation.

$$ \dot{p} = \frac{3}{r} \left ( (\gamma - 1) K \frac {\partial T}{\partial r}\Bigg|_R - \gamma p \dot{R} \right )$$

where $$T$$ is the temperature, $$K$$ is the thermal conductivity of the gas, and $$r$$ is the radial distance.

Flynn's Formulation
This formulation allows the study of the motions and the effects of heat conduction, shear viscosity, compressibility, and surface tension on small cavitation bubbles in liquids that are set into motion by an acoustic pressure field. The effect of vapor pressure on the cavitation bubble can also be determined using the interfacial temperature. The formulation is specifically designed to describe the motion of a bubble that expands to a maximum radius and then violently collapses or contracts. This set of equations was solved using an improved Euler method.

$$\left ( 1 - \frac{\dot{R}}{c} \right ) R \ddot{R} + \frac{3}{2} \dot{R^2} \left ( 1 - \frac{\dot{R}}{3c} \right ) = \left ( 1 + \frac{\dot{R}}{c} \right ) \frac{1}{\rho_l} \left [ p_B(R,t) - p_A(t) - P_\infty \right ] + \frac{R}{\rho_l c} \left ( 1 - \frac{\dot{R}}{c} \right ) \frac{dp_B(R,t)}{dt}$$

where $$\scriptstyle R$$ is the radius of the bubble, the dots indicate first and second time derivatives, $$\scriptstyle \rho_l$$ is the density of the liquid, $$\scriptstyle c$$ is the speed of sound through the liquid, $$\scriptstyle dp_B(R,t)$$ is the pressure on the liquid side of the bubble's interface, $$\scriptstyle t$$ is time, and $$\scriptstyle p_A(t)$$ is the driving pressure.

Rayleigh-Presset Equation
The theory of bubble dynamics was started in 1917 by Lord Rayleigh during his work with the Royal Navy to investigate cavitation damage on ship propellers. Over several decades his work was refined and developed by Milton Plesset, Andrea Prosperetti, and others. The Rayleigh-Presset Equation is:

$$R \ddot{R} + \frac{3}{2} \dot{R^2} = \frac{1}{\rho_l} \left ( p_g - P_0 - P \left ( t \right ) - 4\mu \frac{\dot{R}}{R} - \frac{2\gamma}{R} \right )$$

where $$\scriptstyle R$$ is the bubble radius, $$\scriptstyle \ddot{R}$$ is the second order derivative of the bubble radius with respect to time, $$\scriptstyle \dot{R}$$ is the first order derivative of the bubble radius with respect to time, $$\scriptstyle \rho_l$$ is the density of the liquid, $$\scriptstyle p_g$$ is the pressure in the gas (which is assumed to be uniform), $$\scriptstyle P_0$$ is the background static pressure, $$\scriptstyle P(t)$$ is the sinusoidal driving pressure, $$\scriptstyle \mu$$ is the viscosity of the liquid, and $$\scriptstyle \gamma$$ is the surface tension of the gas-liquid interface.

Bubble Surface
The surface of a collapsing bubble like those seen in both SBSL and MBSL serves as a boundary layer between the liquid and vapor phases of the solution.

Generation
MBSL has been observed in many different solutions under a variety of conditions. Unfortunately it is more difficult to study as the bubble cloud is uneven and can contain a wide range of pressures and temperatures. SBSL is easier to study due to the predictable nature of the bubble. This bubble is sustained in a standing acoustic wave of moderate pressure, approximately 1.5 atm. Since cavitation does not normally occur at these pressures the bubble may be seeded through several techniques: The standing acoustic wave, which contains pressure antinodes at the center of the containment vessel, causes the bubbles to quickly coalesce into a single radially oscillating bubble.
 * 1) Transient boiling through short current pulse in nichrome wire.
 * 2) A small jet of water perturbs the surface to introduce air bubbles.
 * 3) A rapidly formed vapor cavity via focused laser pulse.

Collapse
Once a single bubble is stabilized in the pressure antinode of the standing wave, it can be made to emit pulses of light by driving the bubble into highly nonlinear oscillations. This is done by the increasing pressure of the acoustic wave to disrupt the steady, linear growth of the bubble which cause the bubble to collapse in a runaway reaction that only reverts due to the high pressures inside the bubble at its minimum radius.

Afterbounces
The collapsed bubble expands due to high internal pressure and experiences a deminishing effect until the high pressure antinode returns to the center of the vessel. The bubble continues to occupy more or less the same space due to the acoustic radiation force, the Bjerkens force, and the buoyancy force of the bubble.



Surface Chemistry
The effect that different chemicals present in solution have to the velocity of the collapsing bubble has recently been studied. Nonvolatile liquids such as sulfuric and phosphoric acid have been shown to produce flashes of light several nanoseconds in duration with a much slower bubble wall velocity, and producing several thousand-fold greater light emission. This effect is probably masked in SBSL in aqueous solutions by the absorption of light by water molecules and contaminants.

Surface Tension
It can be inferred from these results that the difference in surface tension between these different compounds is the source of different spectra emitted and the time scales in which emission occur.

Light Emission
The inertia of a collapsing bubble generates high pressures and temperatures capable of ionizing a small fraction of the noble gas within the volume of the bubble. This small fraction of ionized gas is transparent and allows for volume emission to be detected. Free electrons from the ionize noble gas begin to interact with other neutral atoms causing thermal bremsstrahlung radiation. Surface emission emits a more intense flash of light with a longer duration and is dependent on wavelength. Experimental data suggest that only volume emission occurs in the case of sonoluminescence. As the sound wave reaches a low energy trough the bubble expands and electrons are able to recombine with free ions and halt light emission. Light pulse time is dependent on the ionization energy of the noble gas with argon having a light pulse of 160 picoseconds.

Electrical Processes
In 1937 the explanations for the light emission have been with the favoritism through electrical discharges. The first ideas have been about the charge separation in cavitation bubbles, which have been seen as spherical capacitors with charges at the center and the wall. At the collapse, the capacitance decreases and voltage increases until electric breakdown occurs. A further suggestion was a charge separation by enhancing charge fluctuations on the bubble wall, however, a breakdown should take place during the expansion phase of the bubble dynamics. These discharge theories have to assume that the emitting bubble undergoes an asymmetric collapse, because a symmetric charge distribution cannot radiate light.

Thermal Processes
Because the bubble collapse occurs within microseconds, the hot spot theory states that the thermal energy results from an adiabatic bubble collapse. In 1950 it was assumed that the bubble internal temperatures were as high as 10,000 K at the collapse of a spherical symmetric bubble.

Bubble Shape Stability
The limit for the ambient size of the bubble is set by the appearance of instabilities in the shape of the oscillating bubble. The shape stability thresholds depend on changes in the radial dynamics, caused by different liquid viscosities or driving frequencies. If the frequency is decreased, the parametric instability is suppressed as the stabilizing influence of viscosity can appear longer to suppress perturbations. However, the collapses of low-frequency-driven bubbles favor and earlier onset of the Rayleigh-Taylor instability. Larger bubbles can be stabilized to show sonoluminescence when not too high forcing pressures are applied. At low-frequency the water vapor becomes more important. The bubbles can be stabilizied by cooling the fluid, whereas more light is emitted.

Applications
Sonoluminescence might be a low energy source of neutrons for several applications, most notably in the development of a viable fusion reactor.

Bubble Fusion
It is speculated that the extremely high temperatures and pressures present on the interior of a collapsing bubble like those seen in SBSL may be sufficient to achieve thermonuclear fusion. This reaction is called acoustic inertial confinement fusion, or more commonly, bubble fusion.