User:Avatrix

C-4 is made up of explosives, plastic binder, plasticizer and, usually, marker or taggant chemicals such as 2,3-dimethyl-2,3-dinitrobutane (DMDNB) to help detect the explosive and identify its source.

As with many plastic explosives, the explosive material in C-4 is RDX (cyclonite or cyclotrimethylene trinitramine) which makes up around 91% of the C-4 by weight. The plasticizer is diethylhexyl or dioctyl sebacate (5.3%) and the binder usually is polyisobutylene (2.1%).

Another plasticizer used is dioctyl adipate (DOA). A small amount of SAE 10 non-detergent motor oil (1.6%) is also added. C-4 detonates with a pressure wave of about 8,040 meters per second (26,400 ft/s) equaling 28,900 km/h (18,000 mph).

C-4 is manufactured by combining RDX slurry with binder dissolved in a solvent. The solvent is then evaporated and the mixture dried and filtered. The final material is an off-white solid with a feel similar to modelling clay.

Composition C-4 / Comp C-4 Plastic Explosive The plasticized form of RDX, composition C-4, contains 91% RDX, 2.1% polyisobutylene, 1.6% motor oil, and 5.3% 2-ethylhexyl sebacate.

The Demolition charge M183 is used primarily in breaching obstacles or demolition of large structures where large charges are required (Satchel Charge). The charge assembly M183 consists of 16 block demolition charges M112, four priming assemblies and carrying case M85. Each Priming assembly consists of a five-foot length of detonating cord assembled with two detonating cord clips and capped at each end with a booster. The components of the assembly are issued in the carrying case. The demolition charge M112 is a rectangular block of Composition C-4 approximately 2 inches by 1.5 inches and 11 inches long, weighing 1.25 Lbs. When the charge is detonated, the explosive is converted into compressed gas. The gas exerts pressure in the form of a shock wave, which demolishes the target by cutting, breaching, or cratering.