User:Chandan2002/sandbox

Qu Looping sensor It is modern hybrid logical sensor concept based on set of multiple physical sensor to estimate the position/presence of the target object. The sensory system should be using open physical sensors without any propitiatory firmware or hardware (even if it is propitiatory, the physical interface definitions and documents must be available. The sensory system primarily has two fronts: Primary Detector, Secondary Transmitter. Both the modules should be interconnected through possible interface/s (usually by back-end connectivity).

How it works: The Primary detector is a media that uses single or multiple interfaces either one or multiple one at a time. The prime objective of this unit is to sense the presence of the desired entity without receiving any data-packect by requesting any exchange of command. In more simplified way, it is a generic receiver which may be tuned or configured (logically) to receive and data presence in air in a simplex communication where the detector may be treated as receiver only. The physical sensor may be catered to optical, mechanical, bio-logical, Radio Frequency etc.The primary detector should be capable of configuration enough to filter, ignore, showing affinity toward a set/s of transmitter. The detector system is also should be capable enough to be configured and governed by external physical sensor/s. The secondary transmitter is an active generic device capable enough to transmit or broadcast its identity protected by suitable encoding or encryption technique. The looping is important to establish and synchronize the sensors through back-end communication channel, not only to make the simplex channel complete, but also a reliable acknowledgement of transmission and reception.