User:ColinKing/Sandbox

This is the Sandbox of User:ColinKing

Modern Jigsaw Puzzle Accessories
Illustrated below are the most widely used modern products. Most of the accessories come in a range of sizes to cater for jigsaw puzzles between 500 and 2,000 pieces with the 1,000 piece size being the most popular.

Stand Alone Construction Tray
Construction trays are the most basic of all jigsaw puzzle accessories and they come in many different materials. Sizes required for different piece counts are as follows:

500 pieces: Approximately 20.4" x 15.5" (520mm x 395mm) 1,000 pieces: Approximately 29.5" x 20.4" (750mm x 520mm)

1,500 pieces: Approximately 36.0" x 26.0" (915mm x 660mm)

The major problem with stand alone construction trays is that they cannot be packed away and stored with a part-assembled jigsaw. However, they can very easily be moved around from place to place in a home - the only functionality required by many people.

Roll-up Mat


Launched in 1989, the Jigroll was the forerunner of modern jigsaw puzzle accessories. The jigsaw is constructed on a green cloth that has a course texture to which cardboard jigsaw pieces adhere. The non assembled pieces are also kept on the cloth. When the puzzle needs to be cleared away the entire cloth is rolled around a drum thus keeping both the assembled and non-assembled pieces trapped in position until the cloth is unrolled again.

Care needs to be taken to ensure that just the right tightness is achieved - too loose and the pieces will fall about and possibly be lost, too tight and pieces can be damaged.

Portfolio Case
Portapuzzle obtained a registered trade mark for Falcon Games approximately 4 years after their successful launch of Jigroll (see above). A portfolio case opens out to reveal a foam backed lining. The puzzle is constructed on one side of the case and the unassembled pieces are kept either on the other side of the case or on "Panels" provided. When closed up the foam backed lining on either side of the case exerts enough pressure to keep the jigsaw pieces in place.

This invention is generally considered to be a safer way of keeping pieces in place but it involves more material and more assembly labour than a Jigroll and is consequently more expensive.

Portfolio Case with Separate Construction Tray


The outer carrying case holds a separate "Construction Tray" on which the jigsaw is made and "Sort Trays" on which the unassembled pieces are kept. The sort trays come complete with tightly fitting lids. To pack away the jigsaw the sort trays (with their lids in place) are fitted inside the construction tray and the whole is then zipped up inside the carrying case.

The separate construction tray is very light and can easily be moved around and an additional benefit is the raised edge around the outside of the tray that ensures pieces don't drop off and get lost. On the downside, the extra component parts add to the retail price.

Nesting Boxes for Unassembled Pieces


The loose pieces of a jigsaw take up approximately twice the space of a completed puzzle and these nesting boxes aim to solve the problem of how best to store 1,000 loose pieces in a small area. The boxes can be used for sorting different shapes or colours of piece. Each box has a removable insert so that sections of the puzzle can be constructed in the box and then easily moved to the developing jigsaw.

This accessory is a good choice for those who have a table that is large enough to accommodate a completed puzzle and are prepared to dedicate the table to the jigsaw throughout the time that it takes to complete it.

Jigsaw Puzzle Frames


Traditionally (especially in Japan) jigsaw puzzles that are hung on a wall are glued onto a backing board. Once glued, it is a simple process to fit a puzzle into a frame in much the same way as a picture is fitted in a picture frame. The major problem with gluing is that the jigsaw immediately loses its charm and its value. Jigsaw puzzle aficionados regard it as sacrilege to glue a puzzle!

Jigframe solves the problem by the use of a shallow drawer incorporated into the frame. The assembly allows jigsaws to be framed without the use of glue. Before purchasing, make sure that your puzzle fits within the upper and lower size limits given by the frame manufacturer.

Storage Cases


The product comes with 10 cardboard sheets on which completed puzzles are stored. The puzzles along with their cardboard sheets are stacked on top of each other in the manner of a multi-tiered sandwich. Ultimately the entire sandwich is held together with straps that are provided and then the whole is stored in an outer cardboard case.

This accessory is most suitable for dedicated enthusiasts, schools and clubs where there is a requirement to keep and display completed puzzles.