User:Darshakchavda/sandbox

APPLICABLE STANDARD

The following standard shall be applicable for Instrumentation work.

Sr. No	Standard	Full Form 1.		ISA	INTERNATIONAL STANDARD FOR AUTMATION / INSTRUMENT STANDARD OF AMERICA 2.		ANSI	AMERICAN NATIONAL STANDARD FOR INSTRUMENTATION 3.		IS	INDIAN STANDARD 4.		AGA	AMERICAN GAS ASSOCIATION, GAS MEASUREMENT COMMITTEE 5.		ANSI/ASME	AMERICAN NATIONAL STANDARDS INSTITUTE/ AMERICAN SOCIETY OF MECH. ENGINEERS 6.		ANSI/FCI	AMERICAN NATIONAL STANDARDS INSTITUTE/ FLUID CONTROL INSTITUTE 7.		API	AMERICAN PETROLEUM INSTITUTE 8.		ASTM	AMERICAN SOCIETY FOR TESTS AND MATERIALS 9.		BS	BRITISH STANDARDS 10.		IEC	INTERNATIONAL ELECTROTECHNICAL COMMISSION 11.		NEMA	NATIONAL ELECTRICAL MANUFACTURER’S ASSOCIATION 12.		IP	INGRESS PROTECTION

Sr. No	Standard	Application 1.		IS-5	COLORS FOR READY MIXED PAINTS 2.		ISA 5.1	INSTRUMENTATION SYMBOLS & IDENTIFICATION 3.		IS 3043	EARTHING STANDARD 4.		IEC 801	ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL PROCESS MEASUREMENT AND CONTROL EQUIPMENT 5.		B 1.20.1	PIPE THREADS 6.		B 16.5	STEEL PIPE FLANGES AND FLANGED FITTINGS 7.		B 16.20	RING JOINT GASKETS AND GROOVES FOR STEEL PIPE FLANGES 8.		BS-1042	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS 9.		BS-5308 PART-II	SPECIFICATION FOR PVC INSULATED CABLES 10.		BS 5862: Part I 1986	ANALOGUE SIGNALS SHALL BE 4-20 MA 11. DIN-43760	TEMPERATURE VS. RESISTANCE CURVES FOR RTDS 12.		DIN-19234	ELECTRICAL DISTANCE SENSORS; DC INTERFACE FOR DISTANCE SENSORS AND SIGNAL CONVERTER 13.		DIN-50049	DOCUMENT ON MATERIAL TESTING 14.		IEC 529	CLASSIFICATION OF DEGREE OF PROTECTION PROVIDED BY ENCLOSURES 15.		IEC 534-2	INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY 16.		IEC 584-2	THERMOCOUPLES – TOLERANCES 17.		IEC 751	INDUSTRIAL PLATINUM RESISTANCE THERMOMETER SENSORS 18.		RP 521	GUIDE FOR PRESSURE RELIEVING AND DEPRESSURIZING SYSTEMS 19.		RP 526	FLANGED STEEL SAFETY RELIEF VALVES 20.		RP 527	SEAT TIGHTNESS OF PRESSURE RELIEF VALVES 21.		RP 551	PROCESS MEASUREMENT INSTRUMENTATION 22.		S 2000 	VENTING ATMOSPHERIC AND LOW PRESSURE STORAGE TANKS 23.		S 670 	VIBRATION, AXIAL-POSITION AND BEARING TEMPERATURE

APPLICABLE ABBERIVIATION

THE FOLLOWING ABBREVIATION SHALL BE APPLICABLE FOR INSTRUMENTATION WORK.

SR. NO	ABBREVIATION	FULL FORM 1.		AC 	ALTERNATING CURRENT 2.		Amp 	AMPERES 3.		CPU 	CENTRAL PROCESSING UNIT 4.		DC 	DIRECT CURRENT 5.		DCDB 	DIRECT CURRENT DISTRIBUTION BOARD 6.		Hz 	HERTZ 7.		ICA 	INSTRUMENTATION, CONTROL AND AUTOMATION 8.		ICP 	INSTRUMENT CONTROL PANEL 9.		I / O 	INPUT / OUTPUT 10.		Kg 	KILOGRAMS 11.		kV 	KILOVOLTS 12.		mA 	MILLIAMPS 13.		MCB 	MINIATURE CIRCUIT BREAKER 14.		MCC 	MOTOR CONTROL CENTRE 15.		Mtr	METERS 16.		mm 	MILLIMETRES 17.		cm	CENTIMETER 18.		mv 	MILLIVOLTS 19.		mwc 	METERS OF WATER COLUMN 20.		PC 	PERSONAL COMPUTER 21.		PLC 	PROGRAMMABLE LOGIC CONTROLLER 22.		RTD 	RESISTANCE TEMPERATURE DETECTORS 23.		SCADA 	SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM 24.		SPD 	SURGE PROTECTION DEVICES 25.		UPS 	UNINTERRUPTIBLE POWER SUPPLY 26.		V 	VOLTS 27.		RTU	REMOTE TRANSMISSION UNIT 28.		HART	HIGHWAY ADDRESSABLE REMOTE TRANSDUCER- PROTOCOL 29.		TCP / IP	TRANSMISSION CONTROL PROTOCOL / INTERNET PROTOCOL 30.		NTU	NEPHELOMETRIC TURBIDITY UNITS 31.		WLAN	WIRELESS LOCAL AREA NETWORKS 32.		PPM	PART PER MILLION 33.		Mg / lit	MILLIGRAM PER LITER 34.		° C	DEGREE CENTIGRADE 35.		PSI	POUNDS PER SQUARE INCH