User:Devildogatl/slice

REDCOM SLICE
This page is intended to be used as a resource to configure the redcom slice. This page will allow the switchboard programmer access to cutsheets globaly.

We will start out with the basic configurations.

1. login 2. >gen 3. >sys 4. >switch=mil, y 5. >seq=none 6. >spec=yes 7. >fill 8. >ex;act 9. >hardware 10. >fill, enter, 8, t1, t1, enter 11. >ex;act 12. >lo 13. >adm 14. >npa 15. >npa= (the area code you are using) 16. >hmx= (your switch code) 17. >ex;act 18. >adm 19. >option 20. >stnsz=3 21. >ex;act 22. >slot=4,0r 8, (the slot with the line/d card) 23. >cct=0 (which ever slot is open) 24. >cir (gives more info) 25. >stat= ( phone number) 26. >ex;act 27. >dct=0 28. >dct=6 29. >entry=1 30. >patt=(area code) 31. >dct=7 32. >patt=(home switch code) 33. >entry=9 34. >patt= (blank after the =) 35. >entry=2 36. >patt=(switch code you are trunking to) 37. >type=rte 38. >val=1 39. >dct=8 40. >entry=9 41. >patt=xxx 42. >ex;act 43. >group=1 (error will come up) 44. >slot=1 (slot w/ trunk card) 45. >cct=0 46. >line=b8zs 47. >alarm=frame 48. >framing=esf 49. >ex;act 50. >group 51. >new=trk 52. >group=1 53. >name=(switchcode, type of dialing) 54. >wnki=;wnko= 55. >dct=11 56. >mem 57. >add=0/0.1/0/0 (cluster/msu.slot/cct/cct 58. >qty=24 (# of trunks) 59. >ex;act 60. >route 61. >route=1 62. >group=1 63. >del=0 64. >ex;act

THIS IS A VERY, VERY BASIC CONFIG GUIDELINE FOR THE SLICE!

For more specific guidelines, and user help, continue reading.