User:Ghaneline

Connecting it up
Set IP Address to 192.168.1.10 Set Default Gateway to 192.168.1.1

Don't use DHCP in Vista is has bugs (overwritting default router) - Know bug in MS

In Browser go to https://192.168.1.1/admin

Connceting up the Console connection
Configure the terminal emulation software or terminal for:
 * Bits per second: 9600
 * Data bits: 8
 * Parity: None
 * Stop bits: 1
 * Flow control: None

Of use Putty to Serial connect in.

Set ASA Hostname and Domain Name
Hostname biometrica domain-name here.com write memory exit

Enable SSH access on Inside/Outside ports.
configure terminal username garydh password   passwd   ssh 192.168.1.1 255.255.255.255 inside ssh 10.10.10.1 255.255.255.255 outside crypto key generate rsa modulus 2048 aaa authentication ssh console LOCAL write memory exit

Reseting to Factory Fresh
configure terminal configure factory-default

Restoring the Startup config
copy startup-config running-config

Or

reload

Change Privileged Mode and Password
enable password

Set outside IP Address/VLAN (outside)
configure terminal interface vlan 2 nameif outside ip address 10.10.10.27 255.255.255.0 no shut interface Ethernet0/0 switchport access vlan 2 write memory

Set Inside IP Address/VLAN (inside)
Not Working......

biometrica# configure terminal biometrica(config)# no dhcpd enable inside                -- turn off dhcp for inside biometrica(config)# interface vlan 1 biometrica(config-if)# nameif inside biometrica(config-if)# ip address 192.168.2.2 255.255.255.0 biometrica(config-if)# no shut biometrica(config-if)# interface Ethernet0/1 biometrica(config-if)# switchport access vlan 1 biometrica(config-if)# write memory

copy running-config startup-config

Set inside VLAN (inside)
Set Inside VLAN to vlan1 (Default) Enable Interface Set Interface Name

Set IP Address to vlan1 For now set to
 * IP Address: 192.168.1.1
 * Subnet Nask: 255.255.255.0

Enable ssh access to local ports

 * Management Access Interface ?

info
[OK] hostname hq [OK] domain-name here.com [OK] Interface vlan3 Interface vlan3 [OK] no shutdown [OK] Interface vlan2 Interface vlan2 [OK] ip address 10.10.10.12 255.255.255.0 [OK] ssh 192.168.1.0 255.255.255.255 inside [OK] enable password password [OK] write memory