User:Igor Ivasyuk/sandbox

Capercraft. The basic concept - light carried on the trunk of a car design, which allows to use it for different purposes all year round - both the water and on snow / ice on the ground and grass. Without the use of roads for general use. The main purpose - a means of transportation for hunters, fishermen, as a means of entertainment. Mandatory registration in the state bodies with a periodic checkup. The right to operate small boat required for the driver of the vehicle. Cruising speed Water - up to 60 km / h on ice - up to 70-75 km / h

The body will be filled composite (sandwich bar) with filling of extruded polystyrene foam Penoplex ( http://www.penoplex.ru/subsection/certificate.html), lined with sheets of aluminum-magnesium alloy. Frame size 3.4 x1, 7h0, 15 meters. Not beyond the dimensions of the car. Displacement 0.82 tons. Adhesive bonding is a special polyurethane adhesive for sandwich panels German production, made in the maritime register of Germany. http://stim-nn.ru/sikaforce-7710-l35-byvshiy-1849/ Bonding is done by vacuum pressing with all necessary technological requirements. Body weight with controls mounted to the "skirt" of specially developed for this purpose nylon English production - about 45-50 kg. Weight is very small, so that two adult men are easily arranged it in the car trunk. Car boot of the Swedish company Thule, which has all the necessary European certificates, has a load capacity of 75 kg. In the body of the body at specific locations will be mounted duralumin tube for mounting attachments - namely, the seat of power and unit, as well as the holes for mounting to the car trunk. The power unit - single cylinder four-stroke engine weighing 31 kg, capacity of 18 hp a German certificate, brand Wiltec.

In the long term can be applied and these motors 15 hp, as LIFAN, Greenfield and others. Sold on the Russian market and having all the necessary certificates. Propeller in the first sample is targeted by a special program for calculation of the screws in my technical requirements will be made of ash on the machine with CNC in Togliatti. Estimated margin of safety in the mathematical model - 4. By my calculations, with the weight of a hovercraft assembled up to 120 kg, with two passengers to 100 kg - 320 kg gross weight. Total displacement at 0.82 ton on the vessel will need to make an additional vertical load 500 kg to be countersunk to a level with the surface of the water. The effect of the float guarantee complete safety, buoyancy hovercraft in the case of engine failure.

The technology used is as follows: A. The car with the vessel arrives at the place of use. Two. Two men remove body from the car trunk. Removed from the main trunk frame with the engine, propeller and a seat, battery. Three. Frame with a power unit mounted on the 4 nuts with battery screwdriver. Similarly, fixed propeller, seat cowl and possible cylindrical shell is protecting propeller guard. 4. Mounted battery for electric start engine, and controls a hovercraft. The entire build process in place is no more than 15-20 minutes.. Five. The use of the vessel to its destination. 6. Demolition is carried out in reverse order. 7. On arrival at the place of storage of hovercraft (garage), the body is removed from the trunk road and is located on the garage side wall vertically in special brackets. At the same time taking up virtually no usable space in the garage. The rest is placed at the discretion of the owner. Igor Ivasyuk (talk) 20:01, 21 June 2012 (UTC) Igor Ivasyuk