User:Ipramono

= University of Washington Human Powered Submarine Electronic Team =

All of the information about the specs for our devices is located in: http://students.washington.edu/jtpram/me499/

Some Good Information
Oscillator set-up information The summary of sensors specs PIC to PC Allen: We wanna have a test program for the pic so we can know if the PCB is bad or not.

RPM Counter (note): Must have all zeros on counter set to zero with same R value. (If you don't get this, email me:     stevvooe@msn.com)

SRAM type: BENCHMARQ bq4011YMA-70 0227-C 272001W

Oscillator Solution: - Change the Crystal Oscillator with DIP Oscillator - Thanks to David Burnett

RS232 Solution: - Setup the wiring cable manually instead of using manufacturer's cable.

Oscillator solution: - Feed 5V into the brown wire (Uref) - Connect ground of oscillator into the same ground of the PIC chip - Thanks to Prof. Bruce Hemingway

Things To Do
- Oscillator implementation (Indra/Allen/Patrick/Khoi/Stephen) Done - A/D Converter (Indra/Allen/Patrick/Khoi/Stephen) Done - PCB final design (Indra/Allen/Patrick/Khoi/Stephen) - Store RAM (Indra/Allen/Patrick/Khoi/Stephen) - Read RAM -> PC (Indra/Allen/Patrick/Khoi/Stephen) - Safety Device (Daniel Miki)

Personel Contact
In Active: - Allen Wilson - Eletronic/PIC development - kasoinky@gmail.com - Steve Hayman - Eletronic Box - haymansr@u.washington.edu - Brian R Robinson - Eletronic Box - btr9@u.washington.edu - Daniel M Santosa - Devices Safety - dsanto@cs.washington.edu - Indraputra Pramono - Team Leader - pramono@cs.washington.edu

Volunteer: - Patrick Tague - Khoi N Phung - phungk@u.washington.edu - Stephen Day - stevvooe@msn.com - Vivien Wan - wan.vivien@gmail.com - Daniel Shin - seattle78@gmail.com - Maya Prawirodidjojo - maya_p@cs.washington.edu Former personel: - David Burnett - db@ee.washington.edu - Dereck Martin - dereckm@ee.washington.edu - Ted Tsui - ttsui@u.washington.edu - Kyung Sang Kim - kykimice@u.washington.edu - Arifin Ahmad Putka - arifin@cs.washington.edu