User:JSpence1/sandbox

AIA Contract Documents™ are standardized contracts available through the American Institute of Architects (AIA). Their use and acceptance throughout the industry is widespread, serving architects, contractors, owners, attorneys, and developers. The contracts undergo regular revisions on a ten-year cycle. Each revision is the result of a committee of industry professionals presenting their expertise on new trends and issues within the building industry.

The Origins of AIA Contract Documents
The Schedule of Charges was a precursor to the contract documents of today. This document was crafted to establish fees for various architectural services and also payment terms for those fees. The Schedule referred to the construction phase activity as "superintendence." Forty-two years later, in 1917, it became the basis of the AIA's first Owner-Architect Agreement.

At the AIA's 4th Convention, in 1917, Richard Morris Hunt asserted the issue of building contracts. At that time, there were not yet any standard building contracts for use within the industry. Mr. Hunt shared with his colleagues a form he had had written by an attorney and used in practice. As a result of this exchange, Thomas U. Walter, one of the founding members of the AIA, took it one step further and expressed his idea of having the AIA itself prepare and issue standardized contracts.


 * "Now there is a great deal of good that may be brought out by the adoptions of a form of contract by this Institute. It is just that kind of thing that everybody will be glad to get hold of who is going to build, provided they see in it safety all around.. I think, sir, that that will be about one of the best things we have done, if we can prepare a form of contract that will insure strict justice to all..."

Peter B. Wight, the Institute's secretary, was also in attendance and conveyed his ideas about the contracts being used at the time and their shortcomings. He pointed out that many parties within the industry depended on contracts of a simple fashion that were insufficient to adequately mitigate the risks of building. This event served as the building block for standardized contracts and led to the development of documents suitable for general contracting.

Throughout the 1880's and early 1900's, the Uniform Contract was both developed and revised to suit the times. This document was also a precursor to the contract documents of today. It provided all legal terms and articles with blank space that could be filled in by the contracting parties. The Uniform Contract was a huge success and garnered much use throughout the industry. It was reported to have been printed some 65,000 times in its first year of publication. It is also cited in multiple cases of law of that time period.

The Beginning of the AIA Contract Documents Committee
In 1905 the AIA's Vice President, Frank Miles Day, proposed that standard specifications be formed by committee. The next few years saw the committee diligently work on the AIA forms. The committee and the AIA sought to draft and create forms that accommodated the entire building industry. Through the 1940's and 1950's there was continued work to expand the catalog and to continually refine their content and scope. The committee has evolved through the years. As it stands now, the committee boasts membership from across the building industry to include architects, contractors, insurers, owners/developers and various other important figures within the community. Keeping with the original vision of President Day, this committee is intended to ensure fair and balanced agreements are formed for the use of all members of the community.

Present Day Contracts
From the 1950's to present day the contracts continue to grow and evolve with the industry. The most recent release comprised Building Information Modeling (BIM) and Digital Documents Data governance. Around the time of the AIA's 2012 Convention an updated set of Sustainable Practice Documents were released, as well as documents catering to Small Projects Practitioners. AIA Contract Documents are organized into series and families* for easy retrieval.

AIA Contract Documents Software
The AIA has developed and released a software program for utilizing its Contract Documents. The software has undergone many updates to make the user experience more intuitive and functional. With the software, users are able to fully customize their contracts in order to meet their needs on a project-by-project basis. The platform also provides many features for saving time in the contract process, including the ability to save frequently used clauses, contacts and contact templates. The Institute also provides many different license options including limited and unlimited licenses. Users of the software are able to access the entire catalog of AIA Contract Documents.

AIA Contract Documents Education
The AIA Contract Documents Education Portal was released in 2012 in order to provide educational resources for contract documents users as well as those seeking continuing education credits. The portal provides educational material on industry trends, as well as the contract documents themselves. These materials include webinars, podcasts, commentaries, and training courses.

Complete Documents Synopses
{| class="wikitable collapsible collapsed" ! Complete Documents Synopses

A-Series

 * A101–2007, Standard Form of Agreement Between Owner and Contractor where the basis of payment is a Stipulated Sum
 * A101–2007, Standard Form of Agreement Between Owner and Contractor where the basis of payment is a Stipulated Sum


 * A101–2007 SP, Standard Form of Agreement Between Owner and Contractor, for use on a Sustainable Project where the basis of payment is a Stipulated Sum
 * A101–2007 SP, Standard Form of Agreement Between Owner and Contractor, for use on a Sustainable Project where the basis of payment is a Stipulated Sum
 * A102–2007 (formerly A111–1997), Standard Form of Agreement Between Owner and Contractor where the basis of payment is the Cost of the Work Plus a Fee with a Guaranteed Maximum Price
 * A102–2007 (formerly A111–1997), Standard Form of Agreement Between Owner and Contractor where the basis of payment is the Cost of the Work Plus a Fee with a Guaranteed Maximum Price


 * A103–2007 (formerly A114–2001), Standard Form of Agreement Between Owner and Contractor where the basis of payment is the Cost of the Work Plus a Fee without a Guaranteed Maximum Price
 * A103–2007 (formerly A114–2001), Standard Form of Agreement Between Owner and Contractor where the basis of payment is the Cost of the Work Plus a Fee without a Guaranteed Maximum Price


 * A105–2007 (formerly A105–1993 and A205–1993), Standard Form of Agreement Between Owner and Contractor for a Residential or Small Commercial Project
 * A105–2007 (formerly A105–1993 and A205–1993), Standard Form of Agreement Between Owner and Contractor for a Residential or Small Commercial Project
 * A107–2007, Standard Form of Agreement Between Owner and Contractor for a Project of Limited Scope
 * A107–2007, Standard Form of Agreement Between Owner and Contractor for a Project of Limited Scope
 * A132–2009 (formerly A101CMa–1992), Standard Form of Agreement Between Owner and Contractor, Construction Manager as Adviser Edition
 * A132–2009 (formerly A101CMa–1992), Standard Form of Agreement Between Owner and Contractor, Construction Manager as Adviser Edition
 * A133–2009 (formerly A121CMc–2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee with a Guaranteed Maximum Price
 * A133–2009 (formerly A121CMc–2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee with a Guaranteed Maximum Price


 * A134–2009 (formerly A131CMc–2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee without a Guarantee Maximum Price
 * A134–2009 (formerly A131CMc–2003), Standard Form of Agreement Between Owner and Construction Manager as Constructor where the basis of payment is the Cost of the Work Plus a Fee without a Guarantee Maximum Price


 * A141–2004, Agreement Between Owner and Design-Builder
 * A141–2004, Agreement Between Owner and Design-Builder


 * A142–2004, Agreement Between Design-Builder and Contractor
 * A142–2004, Agreement Between Design-Builder and Contractor


 * A151–2007 (formerly A175ID–2003), Standard Form of Agreement Between Owner and Vendor for Furniture, Furnishings and Equipment where the basis of payment is a Stipulated Sum
 * A151–2007 (formerly A175ID–2003), Standard Form of Agreement Between Owner and Vendor for Furniture, Furnishings and Equipment where the basis of payment is a Stipulated Sum


 * A195–2008, Standard Form of Agreement Between Owner and Contractor for Integrated Project Delivery
 * A195–2008, Standard Form of Agreement Between Owner and Contractor for Integrated Project Delivery


 * A201–2007, General Conditions of the Contract for Construction
 * A201–2007, General Conditions of the Contract for Construction


 * A201–2007 SP, General Conditions of the Contract for Construction, for use on a Sustainable Project
 * A201–2007 SP, General Conditions of the Contract for Construction, for use on a Sustainable Project


 * A232–2009 (formerly A201CMa–1992), General Conditions of the Contract for Construction, Construction Manager as Adviser Edition


 * A251–2007 (formerly A275ID–2003), General Conditions of the Contract for Furniture, Furnishings and Equipment


 * A295–2008, General Conditions of the Contract for Integrated Project Delivery


 * A305–1986, Contractor’s Qualification Statement
 * A305–1986, Contractor’s Qualification Statement


 * A310–2010, Bid Bond
 * A310–2010, Bid Bond


 * A312–2010, Performance Bond and Payment Bond
 * A312–2010, Performance Bond and Payment Bond


 * A401–2007, Standard Form of Agreement Between Contractor and Subcontractor


 * A401–2007 SP, Standard Form of Agreement Between Contractor and Subcontractor, for use on a Sustainable Project


 * A441–2008, Standard Form of Agreement Between Contractor and Subcontractor for a Design-Build Project


 * A503–2007 (formerly A511–1999), Guide for Supplementary Conditions
 * A503–2007 (formerly A511–1999), Guide for Supplementary Conditions


 * A533–2009 (formerly A511CMa–1993), Guide for Supplementary Conditions, Construction Manager as Adviser Edition


 * A701–1997, Instructions to Bidders


 * A751–2007 (formerly A775ID–2003), Invitation and Instructions for Quotation for Furniture, Furnishings and Equipment

B-Series

 * B101–2007 (formerly B151–1997), Standard Form of Agreement Between Owner and Architect
 * B101–2007 (formerly B151–1997), Standard Form of Agreement Between Owner and Architect


 * B101–2007 SP, Standard Form of Agreement Between Owner and Architect, for use on a Sustainable Project
 * B101–2007 SP, Standard Form of Agreement Between Owner and Architect, for use on a Sustainable Project


 * B102–2007 (formerly B141–1997 Part 1), Standard Form of Agreement Between Owner and Architect without a Predefined Scope of Architect’s Services
 * B102–2007 (formerly B141–1997 Part 1), Standard Form of Agreement Between Owner and Architect without a Predefined Scope of Architect’s Services


 * B103–2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project
 * B103–2007, Standard Form of Agreement Between Owner and Architect for a Large or Complex Project


 * B104–2007, Standard Form of Agreement Between Owner and Architect for a Project of Limited Scope
 * B104–2007, Standard Form of Agreement Between Owner and Architect for a Project of Limited Scope


 * B105–2007 (formerly B155–1993), Standard Form of Agreement Between Owner and Architect for a Residential or Small Commercial Project
 * B105–2007 (formerly B155–1993), Standard Form of Agreement Between Owner and Architect for a Residential or Small Commercial Project


 * B106–2010, Standard Form of Agreement Between Owner and Architect for Pro Bono Services
 * B106–2010, Standard Form of Agreement Between Owner and Architect for Pro Bono Services


 * B107–2010 (formerly B188–1996), Standard Form of Agreement Between Developer-Builder and Architect for Prototype(s) for Single Family Residential Project.
 * B107–2010 (formerly B188–1996), Standard Form of Agreement Between Developer-Builder and Architect for Prototype(s) for Single Family Residential Project.


 * B108–2009 (formerly B181–1994), Standard Form of Agreement Between Owner and Architect for a Federally Funded or Federally Insured Project
 * B108–2009 (formerly B181–1994), Standard Form of Agreement Between Owner and Architect for a Federally Funded or Federally Insured Project


 * B109–2010, Standard Form of Agreement Between Owner and Architect for a Multi-Family Residential or Mixed Use Residential Project
 * B109–2010, Standard Form of Agreement Between Owner and Architect for a Multi-Family Residential or Mixed Use Residential Project


 * B132–2009 (formerly B141CMa–1992), Standard Form of Agreement Between Owner and Architect, Construction Manager as Adviser Edition
 * B132–2009 (formerly B141CMa–1992), Standard Form of Agreement Between Owner and Architect, Construction Manager as Adviser Edition


 * B142–2004, Agreement Between Owner and Consultant where the Owner contemplates using the design-build method of project delivery
 * B142–2004, Agreement Between Owner and Consultant where the Owner contemplates using the design-build method of project delivery


 * B143–2004, Standard Form of Agreement Between Design-Builder and Architect
 * B143–2004, Standard Form of Agreement Between Design-Builder and Architect


 * B144™ARCH-CM–1993, Standard Form of Amendment to the Agreement Between Owner and Architect where the Architect provides Construction Management Services as an adviser to the Owner
 * B144™ARCH-CM–1993, Standard Form of Amendment to the Agreement Between Owner and Architect where the Architect provides Construction Management Services as an adviser to the Owner


 * B152–2007 (formerly B171ID–2003), Standard Form of Agreement Between Owner and Architect for Architectural Interior Design Services
 * B152–2007 (formerly B171ID–2003), Standard Form of Agreement Between Owner and Architect for Architectural Interior Design Services


 * B153–2007 (formerly B175ID–2003), Standard Form of Agreement Between Owner and Architect for Furniture, Furnishings and Equipment Design Services
 * B153–2007 (formerly B175ID–2003), Standard Form of Agreement Between Owner and Architect for Furniture, Furnishings and Equipment Design Services


 * B161–2002 (formerly B611INT–2002), Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States
 * B161–2002 (formerly B611INT–2002), Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States


 * B162–2002 (formerly B621INT–2002), Abbreviated Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States
 * B162–2002 (formerly B621INT–2002), Abbreviated Standard Form of Agreement Between Client and Consultant for use where the Project is located outside the United States


 * B195–2008, Standard Form of Agreement Between Owner and Architect for Integrated Project Delivery
 * B195–2008, Standard Form of Agreement Between Owner and Architect for Integrated Project Delivery


 * B201–2007 (formerly B141–1997 Part 2), Standard Form of Architect’s Services: Design and Construction Contract Administration
 * B201–2007 (formerly B141–1997 Part 2), Standard Form of Architect’s Services: Design and Construction Contract Administration


 * B202–2009, Standard Form of Architect’s Services: Programming
 * B202–2009, Standard Form of Architect’s Services: Programming


 * B203–2007, Standard Form of Architect’s Services: Site Evaluation and Planning
 * B203–2007, Standard Form of Architect’s Services: Site Evaluation and Planning


 * B204–2007, Standard Form of Architect’s Services: Value Analysis, for use where the Owner employs a Value Analysis Consultant
 * B204–2007, Standard Form of Architect’s Services: Value Analysis, for use where the Owner employs a Value Analysis Consultant


 * B205–2007, Standard Form of Architect’s Services: Historic Preservation
 * B205–2007, Standard Form of Architect’s Services: Historic Preservation


 * B206–2007, Standard Form of Architect’s Services: Security Evaluation and Planning
 * B206–2007, Standard Form of Architect’s Services: Security Evaluation and Planning


 * B207–2008 (formerly B352–2000), Standard Form of Architect’s Services: On-Site Project Representation
 * B207–2008 (formerly B352–2000), Standard Form of Architect’s Services: On-Site Project Representation


 * B209–2007, Standard Form of Architect’s Services: Construction Contract Administration, for use where the Owner has retained another Architect for Design Services
 * B209–2007, Standard Form of Architect’s Services: Construction Contract Administration, for use where the Owner has retained another Architect for Design Services


 * B210–2007, Standard Form of Architect’s Services: Facility Support
 * B210–2007, Standard Form of Architect’s Services: Facility Support


 * B211–2007, Standard Form of Architect’s Services: Commissioning
 * B211–2007, Standard Form of Architect’s Services: Commissioning


 * B212–2010, Standard Form of Architect’s Services: Regional or Urban Planning
 * B212–2010, Standard Form of Architect’s Services: Regional or Urban Planning


 * B214–2012, Standard Form of Architect’ Services: LEED® Certification
 * B214–2012, Standard Form of Architect’ Services: LEED® Certification


 * B252–2007, Standard Form of Architect’s Services: Architectural Interior Design
 * B252–2007, Standard Form of Architect’s Services: Architectural Interior Design


 * B253–2007, Standard Form of Architect’s Services: Furniture, Furnishings and Equipment Design
 * B253–2007, Standard Form of Architect’s Services: Furniture, Furnishings and Equipment Design


 * B305–1993 (formerly B431–1993), Architect’s Qualification Statement
 * B305–1993 (formerly B431–1993), Architect’s Qualification Statement


 * B503–2007 (formerly B511–2001), Guide for Amendments to AIA Owner-Architect Agreements
 * B503–2007 (formerly B511–2001), Guide for Amendments to AIA Owner-Architect Agreements


 * B509–2010, Guide for Supplementary Conditions to AIA Document B109–2010 for use on Condominium Projects
 * B509–2010, Guide for Supplementary Conditions to AIA Document B109–2010 for use on Condominium Projects


 * B727–1988 (EXPIRED), Standard Form of Agreement Between Owner and Architect for Special Services
 * B727–1988 (EXPIRED), Standard Form of Agreement Between Owner and Architect for Special Services



C-Series

 * C101–1993 (formerly C801–1993), Joint Venture Agreement for Professional Services
 * C101–1993 (formerly C801–1993), Joint Venture Agreement for Professional Services


 * C106–2007, Digital Data Licensing Agreement
 * C106–2007, Digital Data Licensing Agreement


 * C132–2009 (formerly B801CMa–1992), Standard Form of Agreement Between Owner and Construction Manager as Adviser
 * C132–2009 (formerly B801CMa–1992), Standard Form of Agreement Between Owner and Construction Manager as Adviser


 * C191–2009, Standard Form Multi-Party Agreement for Integrated Project Delivery
 * C191–2009, Standard Form Multi-Party Agreement for Integrated Project Delivery


 * C195–2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery
 * C195–2008, Standard Form Single Purpose Entity Agreement for Integrated Project Delivery


 * C196–2008, Standard Form of Agreement Between Single Purpose Entity and Owner for Integrated Project Delivery
 * C196–2008, Standard Form of Agreement Between Single Purpose Entity and Owner for Integrated Project Delivery


 * C197–2008, Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery
 * C197–2008, Standard Form of Agreement Between Single Purpose Entity and Non-Owner Member for Integrated Project Delivery


 * C198–2010, Standard Form of Agreement Between Single Purpose Entity and Consultant for Integrated Project Delivery
 * C198–2010, Standard Form of Agreement Between Single Purpose Entity and Consultant for Integrated Project Delivery


 * C199–2010, Standard Form of Agreement Between Single Purpose Entity and Contractor for Integrated Project Delivery
 * C199–2010, Standard Form of Agreement Between Single Purpose Entity and Contractor for Integrated Project Delivery


 * C401–2007 (formerly C141–1997), Standard Form of Agreement Between Architect and Consultant
 * C401–2007 (formerly C141–1997), Standard Form of Agreement Between Architect and Consultant


 * C441–2008, Standard Form of Agreement Between Architect and Consultant for a Design-Build Project
 * C441–2008, Standard Form of Agreement Between Architect and Consultant for a Design-Build Project


 * C727–1992, Standard Form of Agreement Between Architect and Consultant for Special Services
 * C727–1992, Standard Form of Agreement Between Architect and Consultant for Special Services



D-Series

 * D101–1995, Methods of Calculating Areas and Volumes of Buildings
 * D101–1995, Methods of Calculating Areas and Volumes of Buildings


 * D200–1995, Project ChecklistThe project checklist is a convenient listing of tasks a practitioner may perform on a given project.
 * D200–1995, Project ChecklistThe project checklist is a convenient listing of tasks a practitioner may perform on a given project.


 * D503–2011, Guide for Sustainable Projects, including Agreement Amendments and Supplementary Conditions
 * D503–2011, Guide for Sustainable Projects, including Agreement Amendments and Supplementary Conditions



E-Series

 * E201–2007, Digital Data Protocol Exhibit
 * E201–2007, Digital Data Protocol Exhibit


 * E202–2008, Building Information Modeling Protocol Exhibit
 * E202–2008, Building Information Modeling Protocol Exhibit



G-Series

 * G601–1994, Request for Proposal—Land Survey
 * G601–1994, Request for Proposal—Land Survey


 * G602–1993, Request for Proposal—Geotechnical Services
 * G602–1993, Request for Proposal—Geotechnical Services


 * G612–2001, Owner’s Instructions to the Architect AIA Document G612™–2001 is a questionnaire, drafted to elicit information from the
 * G612–2001, Owner’s Instructions to the Architect AIA Document G612™–2001 is a questionnaire, drafted to elicit information from the


 * G701–2001, Change Order
 * G701–2001, Change Order


 * G701S–2001, Change Order, Subcontractor Variation
 * G701S–2001, Change Order, Subcontractor Variation


 * G701CMa–1992, Change Order, Construction Manager-Adviser Edition
 * G701CMa–1992, Change Order, Construction Manager-Adviser Edition


 * G702–1992, Application and Certificate for PaymentAIA Documents G702™–1992, Application and Certificate for Payment, and G703™–1992,
 * G702–1992, Application and Certificate for PaymentAIA Documents G702™–1992, Application and Certificate for Payment, and G703™–1992,


 * G702S–1992, Application and Certificate for Payment, Subcontractor Variation
 * G702S–1992, Application and Certificate for Payment, Subcontractor Variation


 * G703–1992, Continuation Sheet
 * G703–1992, Continuation Sheet


 * G703S–1992, Continuation Sheet, Subcontractor Variation
 * G703S–1992, Continuation Sheet, Subcontractor Variation


 * G704–2000, Certificate of Substantial CompletionAIA Document G704™–2000 is a standard form for recording the date of substantial
 * G704–2000, Certificate of Substantial CompletionAIA Document G704™–2000 is a standard form for recording the date of substantial


 * G704CMa–1992, Certificate of Substantial Completion, Construction Manager-Adviser Edition
 * G704CMa–1992, Certificate of Substantial Completion, Construction Manager-Adviser Edition


 * G704DB–2004, Acknowledgement of Substantial Completion of a Design-Build Project
 * G704DB–2004, Acknowledgement of Substantial Completion of a Design-Build Project


 * G705–2001 (formerly G805–2001), List of Subcontractors
 * G705–2001 (formerly G805–2001), List of Subcontractors


 * G706–1994, Contractor’s Affidavit of Payment of Debts and Claims
 * G706–1994, Contractor’s Affidavit of Payment of Debts and Claims


 * G706A–1994, Contractor’s Affidavit of Release of Liens
 * G706A–1994, Contractor’s Affidavit of Release of Liens


 * G707–1994, Consent of Surety to Final Payment
 * G707–1994, Consent of Surety to Final Payment


 * G707A–1994, Consent of Surety to Final Reduction in or Partial Release of Retainage
 * G707A–1994, Consent of Surety to Final Reduction in or Partial Release of Retainage


 * G709–2001, Work Changes Proposal Request
 * G709–2001, Work Changes Proposal Request


 * G710–1992, Architect’s Supplemental InstructionsAIA Document G710™–1992 is used by the architect to issue additional instructions or
 * G710–1992, Architect’s Supplemental InstructionsAIA Document G710™–1992 is used by the architect to issue additional instructions or


 * G711–1972, Architect’s Field Report
 * G711–1972, Architect’s Field Report


 * G712–1972, Shop Drawing and Sample Record
 * G712–1972, Shop Drawing and Sample Record


 * G714–2007, Construction Change Directive
 * G714–2007, Construction Change Directive


 * G714CMa–1992, Construction Change Directive, Construction Manager-Adviser Edition
 * G714CMa–1992, Construction Change Directive, Construction Manager-Adviser Edition


 * G715–1991, Supplemental Attachment for ACORD Certificate of Insurance 25-S
 * G715–1991, Supplemental Attachment for ACORD Certificate of Insurance 25-S


 * G716–2004, Request for Information (RFI)
 * G716–2004, Request for Information (RFI)


 * G732–2009 (formerly G702CMa–1992), Application and Certificate for Payment, Construction Manager as Adviser Edition
 * G732–2009 (formerly G702CMa–1992), Application and Certificate for Payment, Construction Manager as Adviser Edition


 * G736–2009 (formerly G722CMa–1992), Project Application and Project Certificate for Payment, Construction Manager as Adviser Edition
 * G736–2009 (formerly G722CMa–1992), Project Application and Project Certificate for Payment, Construction Manager as Adviser Edition


 * G737–2009 (formerly G723CMa–1992), Summary of Contractors’ Applications for Payment, Construction Manager as Adviser Edition
 * G737–2009 (formerly G723CMa–1992), Summary of Contractors’ Applications for Payment, Construction Manager as Adviser Edition


 * G801–2007 (formerly G605–2000), Notification of Amendment to the Professional Services Agreement
 * G801–2007 (formerly G605–2000), Notification of Amendment to the Professional Services Agreement


 * G802–2007 (formerly G606–2000), Amendment to the Professional Services Agreement
 * G802–2007 (formerly G606–2000), Amendment to the Professional Services Agreement


 * G803–2007 (formerly G607–2000), Amendment to the Consultant Services Agreement
 * G803–2007 (formerly G607–2000), Amendment to the Consultant Services Agreement


 * G804–2001, Register of Bid Documents
 * G804–2001, Register of Bid Documents


 * G806–2001, Project Parameters WorksheetAIA Document G806™–2001 is an administrative form intended to help maintain a single standard
 * G806–2001, Project Parameters WorksheetAIA Document G806™–2001 is an administrative form intended to help maintain a single standard


 * G807–2001, Project Team Directory
 * G807–2001, Project Team Directory


 * G808–2001, Project Data
 * G808–2001, Project Data


 * G809–2001, Project Abstract
 * G809–2001, Project Abstract


 * G810–2001, Transmittal Letter
 * G810–2001, Transmittal Letter


 * }

*Find out more about the numbering system